2006 Acura MDX Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Axle Shaft Bearing parts are listed for the 2006 Acura MDX, from SCHAEFFLER and SKF.

This group includes SCHAEFFLER SC0889 and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 2006 Acura MDX come from 3 brands — SKF, TIMKEN and WJB / INMOTION PARTS. The "Popular" part is SKF 15757A.

This group includes SKF 15757A, TIMKEN 710798 and SKF 16541A and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

19 CV Axle parts for the 2006 Acura MDX come from 5 brands — CARDONE, GSP, TOP NOTCH and 2 other brands. The "Popular" part is GSP NCV21550.

The Economy section lists 4 options from CARDONE — the catalog's value-priced group. CARDONE 604284 is listed in this group.

In the Standard Replacement grade, GSP, TOP NOTCH, TRAKMOTIVE and 1 other brand supply 15 parts: built to original-equipment specification. A representative part number is GSP NCV21550.

This table covers the CV Intermediate shafts. Read more

2 CV Intermediate Shaft parts are listed for the 2006 Acura MDX, from TOP NOTCH and TRAKMOTIVE.

This group includes TOP NOTCH TN50310IS and TRAKMOTIVE HO3512.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2006 Acura MDX come from 2 brands — BECK/ARNLEY and MEVOTECH.

This group includes BECK/ARNLEY 1032968, BECK/ARNLEY 1032867 and MEVOTECH DX655 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2006 Acura MDX come from SKF.

This group includes SKF BR147 and SKF BR146.

This table covers the Differential Oil temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: AUTOTECNICA HA1317940.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts are listed for the 2006 Acura MDX, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2006 Acura MDX, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 710798 and WJB / INMOTION PARTS WS710798.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts are listed for the 2006 Acura MDX, from SKP, WJB / INMOTION PARTS, CARDONE and 3 other brands. SKP SK936104 carries the "Popular" badge.

Part numbers include SKP SK936104, WJB / INMOTION PARTS WDS36036 and CARDONE 654004, among others listed above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

11 Transfer Case Fluid parts for the 2006 Acura MDX come from 2 brands — VALVOLINE and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 4 options from VALVOLINE — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts for the 2006 Acura MDX come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER 32205 and SKF BR32205.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2006 Acura MDX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 2006 Acura MDX, from WJB / INMOTION PARTS, NATIONAL and SKF.

Part numbers include NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

2 Transfer Case Output Shaft Repair Sleeve parts for the 2006 Acura MDX come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3472 and SKF 99139.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2006 Acura MDX come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SS5926 and SKF 14921.