2007 Acura MDX Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Axle Shaft Bearing parts for the 2007 Acura MDX come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SC0889 and the remaining parts above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Axle Shaft Seal parts are listed for the 2007 Acura MDX, from SKF, TIMKEN, WJB / INMOTION PARTS and 1 other brand. SKF 16541A carries the "Popular" badge.

This group includes SKF 16541A, SKF 15757A and NATIONAL 711086 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

15 CV Axle parts are listed for the 2007 Acura MDX, from CARDONE, GSP, TRAKMOTIVE and 1 other brand. GSP NCV21552 carries the "Popular" badge.

In the Economy grade, CARDONE supplies 2 parts: the catalog's value-priced group. A representative part number is CARDONE 604262.

The Standard Replacement section lists 13 options from GSP, TRAKMOTIVE, TOP NOTCH and 1 other brand — built to original-equipment specification. GSP NCV21552 is listed in this group.

This table covers the CV Intermediate shafts. Read more

2 CV Intermediate Shaft parts for the 2007 Acura MDX come from 2 brands — GSP and TOP NOTCH.

This group includes GSP NEX36004 and TOP NOTCH TN50310IS.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts are listed for the 2007 Acura MDX, from BECK/ARNLEY and MEVOTECH.

Part numbers include BECK/ARNLEY 1032968, BECK/ARNLEY 1032867 and MEVOTECH DX655, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

SKF supplies both parts for the 2007 Acura MDX.

Part numbers include SKF BR152 and SKF BR148.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts for the 2007 Acura MDX come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts for the 2007 Acura MDX come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710798 and WJB / INMOTION PARTS WS710798.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts for the 2007 Acura MDX come from 5 brands — TOP NOTCH, CARDONE, DORMAN and 2 other brands. The "Popular" part is TOP NOTCH TN2110PS.

Listed part numbers: TOP NOTCH TN2110PS, CARDONE 654014 and DORMAN 936023, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

9 Gear Oil parts are listed for the 2007 Acura MDX, from VALVOLINE, LUCAS OIL, IDEMITSU and 2 other brands. ACDELCO 109243 carries the "Popular" badge.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE and LUCAS OIL supply 5 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

In the Type III (H) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040090750.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes ACDELCO 109243, VALVOLINE VV3246 and LUCAS OIL 10418 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts are listed for the 2007 Acura MDX, from VALVOLINE, LUCAS OIL and MOBIL. MOBIL 104361 carries the "Popular" badge.

In the SAE 75W-90 grade, VALVOLINE and MOBIL supply 7 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 104361.

In the SAE 80W-90 grade, VALVOLINE and LUCAS OIL supply 7 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is LUCAS OIL 10043.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts are listed for the 2007 Acura MDX, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER 32205 and SKF BR32205.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts for the 2007 Acura MDX come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476 and the remaining parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 2007 Acura MDX come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF.

Part numbers include NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721, among others listed above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

One part is listed for the 2007 Acura MDX — SCHAEFFLER SR3472.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2007 Acura MDX, from SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 16537A and WJB / INMOTION PARTS WS16537A.