2008 Acura MDX Drivetrain Parts

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Axle Shaft Bearing parts are listed for the 2008 Acura MDX, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SC0889, among others listed above.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Axle Shaft Seal parts for the 2008 Acura MDX come from 4 brands — SKF, TIMKEN, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is SKF 16541A.

This group includes SKF 16541A, SKF 15757A and NATIONAL 711086 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

15 CV Axle parts for the 2008 Acura MDX come from 4 brands — CARDONE, GSP, TRAKMOTIVE and 1 other brand. The "Popular" part is GSP NCV21552.

The Economy section lists 2 options from CARDONE — the catalog's value-priced group. CARDONE 604262 is listed in this group.

In the Standard Replacement grade, GSP, TRAKMOTIVE, TOP NOTCH and 1 other brand supply 13 parts: built to original-equipment specification. A representative part number is GSP NCV21552.

This table covers the CV Intermediate shafts. Read more

3 CV Intermediate Shaft parts are listed for the 2008 Acura MDX, from GSP, TOP NOTCH and TRAKMOTIVE.

This group includes GSP NEX36004, TOP NOTCH TN50310IS and TRAKMOTIVE HO3512.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2008 Acura MDX come from 2 brands — BECK/ARNLEY and MEVOTECH.

This group includes BECK/ARNLEY 1032968, BECK/ARNLEY 1032867 and MEVOTECH DX655 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2008 Acura MDX come from SKF.

Part numbers include SKF BR152 and SKF BR148.

This table covers the wear sleeves used to restore a Differential seal surface. Read more

2 Differential Repair Sleeve parts are listed for the 2008 Acura MDX, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Differential Seal parts are listed for the 2008 Acura MDX, from NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 710798 and WJB / INMOTION PARTS WS710798.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts are listed for the 2008 Acura MDX, from TOP NOTCH, CARDONE, DORMAN and 2 other brands. TOP NOTCH TN2110PS carries the "Popular" badge.

Listed part numbers: TOP NOTCH TN2110PS, CARDONE 654014 and DORMAN 936023, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

9 Gear Oil parts for the 2008 Acura MDX come from 5 brands — VALVOLINE, LUCAS OIL, IDEMITSU and 2 other brands. The "Popular" part is ACDELCO 109243.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 5 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The Type III (H) section lists 2 options from IDEMITSU — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. IDEMITSU 30040090750 is listed in this group.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include ACDELCO 109243, VALVOLINE VV3246 and LUCAS OIL 10418, among others listed above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts for the 2008 Acura MDX come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts for the 2008 Acura MDX come from 2 brands — SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER 32205 and SKF BR32205.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

4 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2008 Acura MDX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476 and the remaining parts above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 2008 Acura MDX, from WJB / INMOTION PARTS, NATIONAL and SKF.

Listed part numbers: NATIONAL 710721, SKF 18883A and WJB / INMOTION PARTS WS710721, plus the other parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

This group shows a single part: SCHAEFFLER SR3472.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2008 Acura MDX come from 2 brands — SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 16537A and WJB / INMOTION PARTS WS16537A.