2009 Acura TL Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Axle Shaft Seal parts for the 2009 Acura TL come from 4 brands — TIMKEN, SKF, NATIONAL and 1 other brand. The "Popular" part is SKF 15757A. 3 parts fit every engine; the other 3 are engine-specific.

This group includes SKF 15757A, TIMKEN 710300 and NATIONAL 711086 and the remaining parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

11 CV Axle parts for the 2009 Acura TL come from 6 brands — TRAKMOTIVE, CARDONE, TOP NOTCH and 3 other brands. The "Popular" part is APWI HO8410. 8 parts fit every engine; the other 3 are engine-specific.

The Economy section lists 2 options from AUTO EXTRA and CARDONE — the catalog's value-priced group. AUTO EXTRA HO88675 is listed in this group.

In the Standard Replacement grade, TRAKMOTIVE, TOP NOTCH, GSP and 2 other brands supply 9 parts: built to original-equipment specification. A representative part number is APWI HO8410.

This table covers the CV Intermediate shafts. Read more

2 CV Intermediate Shaft parts are listed for the 2009 Acura TL, from TOP NOTCH and TRAKMOTIVE. All of them fit every engine offered in the 2009 TL.

Listed part numbers: TOP NOTCH TN50310IS and TRAKMOTIVE HO3512.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2009 Acura TL come from 2 brands — BECK/ARNLEY and MEVOTECH. Every part fits both the 3.5L V6 and the 3.7L V6.

Listed part numbers: BECK/ARNLEY 1032314, BECK/ARNLEY 1032927 and MEVOTECH DX634, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

2 Differential Carrier Bearing / Race parts for the 2009 Acura TL come from SKF. Every part fits both the 3.5L V6 and the 3.7L V6.

This group includes SKF BR152 and SKF BR148.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts are listed for the 2009 Acura TL, from DORMAN and WJB / INMOTION PARTS.

Listed part numbers: DORMAN 986944 and WJB / INMOTION PARTS WDS86944.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

6 Gear Oil parts for the 2009 Acura TL come from 3 brands — VALVOLINE, LUCAS OIL and ACDELCO. The "Popular" part is ACDELCO 109243.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 5 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

This group includes ACDELCO 109243, VALVOLINE VV3246 and LUCAS OIL 10418 and the remaining parts above.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

11 Transfer Case Fluid parts for the 2009 Acura TL come from 2 brands — VALVOLINE and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 4 options from VALVOLINE — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. VALVOLINE VV831 is listed in this group.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts for the 2009 Acura TL come from 2 brands — SCHAEFFLER and SKF. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include SCHAEFFLER 32205 and SKF BR32205.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts are listed for the 2009 Acura TL, from SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 18883A and WJB / INMOTION PARTS WS18883A.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts for the 2009 Acura TL come from 2 brands — SKF and WJB / INMOTION PARTS.

Part numbers include SKF 16537A and WJB / INMOTION PARTS WS16537A.