2013 Acura TL Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts are listed for the 2013 Acura TL, from TIMKEN, SKF, NATIONAL and 1 other brand. SKF 15757A carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: SKF 15757A, NATIONAL 711086 and TIMKEN SL260509, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

18 CV Axle parts are listed for the 2013 Acura TL, from TRAKMOTIVE, GSP, TOP NOTCH and 2 other brands. APWI HO8568 carries the "Popular" badge. 9 parts fit every engine; the other 9 are engine-specific.

In the Economy grade, AUTO EXTRA supplies 2 parts: the catalog's value-priced group. A representative part number is AUTO EXTRA HO51430.

The Standard Replacement section lists 16 options from TRAKMOTIVE, GSP, TOP NOTCH and 1 other brand — built to original-equipment specification. APWI HO8568 is listed in this group.

This table covers the CV Intermediate shafts. Read more

5 CV Intermediate Shaft parts for the 2013 Acura TL come from 3 brands — GSP, TOP NOTCH and TRAKMOTIVE. The "Popular" part is GSP NEX21000. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: GSP NEX21000, GSP NEX21003 and TOP NOTCH TN50095IS, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

8 CV Joint Boot parts are listed for the 2013 Acura TL, from BECK/ARNLEY and MEVOTECH. BECK/ARNLEY 1032314 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

This group includes BECK/ARNLEY 1032314, BECK/ARNLEY 1032927 and BECK/ARNLEY 1033104 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

SKF supplies both parts for the 2013 Acura TL. All of them fit every engine offered in the 2013 TL.

This group includes SKF BR153 and SKF BR149.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

2 Drive Shaft parts for the 2013 Acura TL come from 2 brands — DORMAN and WJB / INMOTION PARTS.

This group includes DORMAN 986944 and WJB / INMOTION PARTS WDS86944.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts are listed for the 2013 Acura TL, from VALVOLINE and LUCAS OIL. VALVOLINE VV820 carries the "Popular" badge.

In the SAE 75W-90 grade, VALVOLINE supplies 6 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV820.

In the SAE 80W-90 grade, VALVOLINE and LUCAS OIL supply 7 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV831.

This table covers the Transfer Case Input Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Transfer Case Input Shaft Bearing parts are listed for the 2013 Acura TL, from SCHAEFFLER and SKF. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include SCHAEFFLER 32205 and SKF BR32205.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Input Shaft Seal parts for the 2013 Acura TL come from 2 brands — SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 18883A and WJB / INMOTION PARTS WS18883A.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Transfer Case Output Shaft Seal parts are listed for the 2013 Acura TL, from SKF and WJB / INMOTION PARTS.

This group includes SKF 16537A and WJB / INMOTION PARTS WS16537A.