2014 Acura TSX Engine Parts

This table covers the chains that drive the balance shafts. Read more

7 Balance Shaft Chain parts are listed for the 2014 Acura TSX, from S.A. GEAR, INA and MELLING. MELLING 712F carries the "Popular" badge.

The Chain Only section lists 5 options from S.A. GEAR, MELLING and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. MELLING 712F is listed in this group.

In the Kit grade, INA supplies 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is INA ZC76233.

This group includes MELLING 712F, S.A. GEAR C712F and INA ZCC712F and the remaining parts above.

This table covers the guides that keep the balance-shaft chain on its path. Read more

5 Balance Shaft Chain Guide parts are listed for the 2014 Acura TSX, from S.A. GEAR, BECK/ARNLEY, CLOYES and 2 other brands. S.A. GEAR 7518 carries the "Popular" badge.

This group includes S.A. GEAR 7518, BECK/ARNLEY 0241929 and CLOYES 95570 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

7 Balance Shaft Chain Tensioner parts for the 2014 Acura TSX come from 7 brands — INA, S.A. GEAR, CLOYES and 4 other brands. The "Popular" part is INA ZT95791.

This group includes INA ZT95791, S.A. GEAR 91037 and CLOYES 95791 and the remaining parts above.

This table covers the Balance Shaft sprockets. Read more

5 Balance Shaft Sprocket parts are listed for the 2014 Acura TSX, from MELLING, CLOYES, FVP and 2 other brands. MELLING S939 carries the "Popular" badge.

Listed part numbers: MELLING S939, plus the other parts above.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 2014 Acura TSX come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts for the 2014 Acura TSX come from 10 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 7 other brands. The "Popular" part is FEL-PRO TCS46025.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts are listed for the 2014 Acura TSX, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 2 other brands. MAHLE / CLEVITE CB1861H carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 5 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1861H.

The Standard Replacement section lists 8 options from ENGINETECH, KING ENGINE BEARINGS, TOPLINE and 2 other brands — built to original-equipment specification. ENGINETECH BB1013 is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

13 Conversion / Lower Gasket Set parts are listed for the 2014 Acura TSX, from FEL-PRO, APEX, ENGINETECH and 4 other brands. APEX ACS1050 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2014 Acura TSX come from 4 brands — TOPLINE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. The "Popular" part is KING ENGINE BEARINGS MB5259AM.

The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 4 parts, from TOPLINE, KING ENGINE BEARINGS and ENGINETECH. A representative part number is KING ENGINE BEARINGS MB5259AM.

5 further parts sit outside the graded sections, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2014 Acura TSX come from 5 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. The "Popular" part is BCA NS99315. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include BCA NS99315, NATIONAL 99315 and SKF 99313, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

44 Crankshaft Seal parts for the 2014 Acura TSX come from 15 brands — VICTOR REINZ, TIMKEN, AJUSA and 12 other brands. The "Popular" part is FEL-PRO TCS46051. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

17 Cylinder Head Bolt parts are listed for the 2014 Acura TSX, from ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 6 other brands. ENGINETECH HB261 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

19 Cylinder Head Gasket parts are listed for the 2014 Acura TSX, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AHG165 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Cylinder Head Gasket Set parts are listed for the 2014 Acura TSX, from FEL-PRO, APEX, ENGINETECH and 7 other brands. APEX AHS1069 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2014 Acura TSX come from KAT'S HEATERS. Every part fits both the 2.4L L4 and the 3.5L V6.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2014 Acura TSX — TECHPRO AC1228111.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2014 Acura TSX, from AJUSA, TOPLINE and FEL-PRO.

This group includes AJUSA 50305800, AJUSA 50441400 and FEL-PRO 2603206 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2014 Acura TSX come from 4 brands — ENGINETECH, QUALCAST, TOPLINE and 1 other brand.

This group includes ENGINETECH EM4479, ENGINETECH EM4407 and ITM ENGINE COMPONENTS RX9599 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts are listed for the 2014 Acura TSX, from ATP, DAYCO, SKP and 1 other brand. SKP SK594386 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594386.

The Standard Replacement section: 4 options from ATP, DAYCO and PIONEER. ATP 102353 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SKP SK594386, ATP 102353 and ATP 102395, among others listed above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2014 Acura TSX come from 2 brands — AUTOTECNICA and SKP.

This group includes AUTOTECNICA HA1419311 and SKP SK615106.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Intake Manifold Gasket parts are listed for the 2014 Acura TSX, from BECK/ARNLEY, APEX, FEL-PRO and 4 other brands. APEX AMS1691 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Intake Plenum Gasket parts for the 2014 Acura TSX come from 5 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 2 other brands. The "Popular" part is FEL-PRO MS964093.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2014 Acura TSX come from 3 brands — ENGINETECH, QUALCAST and TOPLINE.

This group includes ENGINETECH IM4478, ENGINETECH IM4476 and QUALCAST 1013358 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

39 Motor Mount parts for the 2014 Acura TSX come from 7 brands — SKP, ANCHOR, PIONEER and 4 other brands. The "Popular" part is SKP SKMA4572. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 30 parts from ANCHOR, PIONEER, DEA / MARMON RIDE CONTROL and 2 other brands.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts for the 2014 Acura TSX come from ANCHOR.

Part numbers include ANCHOR 300344, ANCHOR 300343 and ANCHOR 300477.