2011 Acura TSX Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

4 Camshaft Repair Sleeve parts are listed for the 2011 Acura TSX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 2011 Acura TSX, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 9 other brands. FEL-PRO TCS46025 carries the "Popular" badge.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2011 Acura TSX come from 4 brands — KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 1 other brand. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

This group includes ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2011 Acura TSX come from 6 brands — ENGINETECH, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is ENGINETECH HO35CSA.

Listed part numbers: ENGINETECH HO35CSA, FEL-PRO CS26265 and AJUSA 54253700, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2011 Acura TSX, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH BC1537 carries the "Popular" badge.

Listed part numbers: ENGINETECH BC1537, MAHLE / CLEVITE MS2335A and ITM ENGINE COMPONENTS 4M1201, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 2011 Acura TSX, from SKF and WJB / INMOTION PARTS.

This group includes SKF 99313 and WJB / INMOTION PARTS WS99317.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2011 Acura TSX, from ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. FEL-PRO BS40685 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

10 Cylinder Head Bolt parts for the 2011 Acura TSX come from 9 brands — ELRING, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is ENGINETECH HB271.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

15 Cylinder Head Gasket parts for the 2011 Acura TSX come from 8 brands — FEL-PRO, AJUSA, APEX and 5 other brands. The "Popular" part is FEL-PRO 26510PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Cylinder Head Gasket Set parts for the 2011 Acura TSX come from 7 brands — ENGINETECH, FEL-PRO, APEX and 4 other brands. The "Popular" part is APEX AHS1069.

This group includes APEX AHS1069, ENGINETECH HO35HSEWB and AJUSA 52489700 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2011 Acura TSX.

Part numbers include KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO AC1228111.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2011 Acura TSX come from 4 brands — AJUSA, ENGINETECH, FEL-PRO and 1 other brand.

Part numbers include AJUSA 50441400, ENGINETECH HO35K1 and FEL-PRO 2603206, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2011 Acura TSX, from ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 1 other brand.

Listed part numbers: ENGINETECH EM4407, ITM ENGINE COMPONENTS RX9599 and QUALCAST 1010779, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2011 Acura TSX come from 2 brands — ATP and DAYCO.

Listed part numbers: ATP 102367 and DAYCO PB1713N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2011 Acura TSX come from 6 brands — BECK/ARNLEY, ELRING, APEX and 3 other brands. The "Popular" part is APEX AMS1691.

Listed part numbers: APEX AMS1691, MAHLE / CLEVITE MS19696 and BECK/ARNLEY 0376217, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Plenum Gasket parts are listed for the 2011 Acura TSX, from BECK/ARNLEY, VICTOR REINZ, FEL-PRO and 2 other brands. FEL-PRO MS964093 carries the "Popular" badge.

Part numbers include FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and APEX AMS1690, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2011 Acura TSX, from ENGINETECH, QUALCAST and TOPLINE.

Part numbers include ENGINETECH IM4476, QUALCAST 1013336 and TOPLINE IVAC9M.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2011 Acura TSX, from SKP, ANCHOR, PIONEER and 4 other brands. SKP SKMA65003 carries the "Popular" badge.

In the Economy grade, SKP and ULTRA-POWER supply 4 parts: the catalog's value-priced group. A representative part number is SKP SKMA65003.

The Standard Replacement section: 12 options from ANCHOR, PIONEER, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 9451 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2011 Acura TSX — ANCHOR 300477.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

32 Oil parts are listed for the 2011 Acura TSX, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 20438 carries the "Popular" badge. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2011 Acura TSX come from HAYDEN.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2011 Acura TSX — DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2011 Acura TSX, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2011 Acura TSX come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.

Listed part numbers: DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2011 Acura TSX, from CALORSTAT, DORMAN, GATES and 1 other brand.

Part numbers include CALORSTAT OC2335, DORMAN 80985 and GATES 31284, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2011 Acura TSX, from VARIOUS MFR, BOSCH, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge.

Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section: 10 options from BOSCH, DENSO, WIX and 7 other brands. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

6 Oil Filter Adapter Gasket / O-Ring parts for the 2011 Acura TSX come from 4 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 73040.

This group includes FEL-PRO 73040, MAHLE / CLEVITE B31937 and APEX AOM6025 and the remaining parts above.

This table covers the Oil Filter Support tubes. Read more

This group shows a single part: AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2011 Acura TSX come from 4 brands — ATP, DORMAN, SKP and 1 other brand.

Listed part numbers: ATP 103652, DORMAN 264380 and SKP SK264380, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts are listed for the 2011 Acura TSX, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO OS30954T and VICTOR REINZ 703141410.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pressure Sender / Switch Seal parts are listed for the 2011 Acura TSX, from FEL-PRO and JAPANESE OE.

Part numbers include FEL-PRO 73196 and JAPANESE OE 91319PAAA01.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

7 Oil Pump parts are listed for the 2011 Acura TSX, from ITM ENGINE COMPONENTS, SKP, ENGINETECH and 3 other brands. SKP SKPM531 carries the "Popular" badge.

Economy: 3 parts, from SKP, ENGINETECH and ULTRA-POWER. A representative part number is SKP SKPM531.

The Standard Replacement section: 4 options from ITM ENGINE COMPONENTS, MELLING and TOPLINE. MELLING M531 is listed in this group.

This group includes SKP SKPM531, ENGINETECH EPK168 and ULTRA-POWER M531 and the remaining parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts for the 2011 Acura TSX come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 01130500 and ELRING 967650.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Pump Seal parts for the 2011 Acura TSX come from 4 brands — BCA, JAPANESE OE, NATIONAL and 1 other brand.

Listed part numbers: BCA NS711181, JAPANESE OE A6629 and NATIONAL 711181, plus the other parts above.

This table covers the rings that seal each piston to the cylinder wall. Read more

6 Piston Ring parts for the 2011 Acura TSX come from 5 brands — HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH S89416.

In the Premium grade, ENGINETECH, MAHLE / CLEVITE and SEALED POWER supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH S89416.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. A representative part number is HASTINGS MANUFACTURING 2C4972.