2025 Acura Integra Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Crankshaft Seal parts are listed for the 2025 Acura Integra, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO BS40535 and MAHLE / CLEVITE 68080.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2025 Acura Integra come from FEL-PRO.

This group includes FEL-PRO 26840PT and FEL-PRO 26776PT.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO HO1228169.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2025 Acura Integra — QUALCAST 1030539.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE MS20396.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2025 Acura Integra — QUALCAST 1030540.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts are listed for the 2025 Acura Integra, from DEA / MARMON RIDE CONTROL and ANCHOR.

This group includes ANCHOR 10266, DEA / MARMON RIDE CONTROL A65160 and DEA / MARMON RIDE CONTROL A65173.

This table covers the Motor Mount kits. Read more

One part is listed for the 2025 Acura Integra — ANCHOR 300954.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts are listed for the 2025 Acura Integra, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 31 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2025 Acura Integra, from DORMAN, REIN and SKP. All of them fit every engine offered in the 2025 Integra.

Part numbers include DORMAN 090033, DORMAN 090053 and REIN HWU0110, among others listed above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2025 Acura Integra, from GATES and MOTORAD. All of them fit every engine offered in the 2025 Integra.

Part numbers include GATES 31284 and MOTORAD MO159.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts are listed for the 2025 Acura Integra, from VARIOUS MFR, BOSCH, WIX and 8 other brands. WIX 57356XP carries the "Popular" badge. All of them fit every engine offered in the 2025 Integra.

In the Economy grade, VARIOUS MFR, BOSCH, FRAM and 2 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.

The Standard Replacement section lists 7 options from BOSCH, WIX, BECK/ARNLEY and 4 other brands — built to original-equipment specification. BOSCH 3323 is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33713.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 108390.

This table covers the guides and dampers that keep the timing chain on its path. Read more

This group shows a single part: MELLING BG7045.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

MELLING supplies both parts for the 2025 Acura Integra.

This group includes MELLING BT7059 and MELLING BT7057.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2025 Acura Integra — MAHLE / CLEVITE 68064.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2025 Acura Integra come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 10268 and DEA / MARMON RIDE CONTROL A65174.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts for the 2025 Acura Integra come from WELLS.

This group includes WELLS 5S15125 and WELLS 5S15759.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE F33463.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

SUNSONG supplies the 3 Turbocharger Oil Line parts for the 2025 Acura Integra.

This group includes SUNSONG 5802170, SUNSONG 5804143 and SUNSONG 5804248.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2025 Acura Integra, from FEL-PRO, ELRING and MAHLE / CLEVITE.

Listed part numbers: ELRING 165160, FEL-PRO VS50965R and FEL-PRO VS50975R, plus the other parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: MELLING VS2499.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR731.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MAHLE / CLEVITE supplies both parts for the 2025 Acura Integra.

This group includes MAHLE / CLEVITE SS45627 and MAHLE / CLEVITE SS45626.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2025 Acura Integra, from WELLS, GATES, WALKER PRODUCTS and 1 other brand.

Economy: 3 parts, from GATES, WALKER PRODUCTS and WELLS. A representative part number is GATES VVS383.

The Standard Replacement section: 1 option from ACKOJA. ACKOJA A260287 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include GATES VVS383, WALKER PRODUCTS 5901323 and WELLS 2T1277, among others listed above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts for the 2025 Acura Integra come from ELRING.

Listed part numbers: ELRING 108080 and ELRING 108040.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2025 Acura Integra — STANDARD MOTOR PRODUCTS VVT773.