2000 Acura Integra Engine Parts

This table covers the camshafts that open the valves. Read more

TOPLINE supplies both parts for the 2000 Acura Integra.

This group includes TOPLINE CAMH18SE and TOPLINE CAMH18SI.

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2000 Acura Integra — AJUSA 00794900.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2000 Acura Integra — FEL-PRO ES72476.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

This group shows a single part: SCHAEFFLER SR3460.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

27 Camshaft Seal parts for the 2000 Acura Integra come from 16 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 13 other brands. The "Popular" part is APEX ATC1120. A list this long means Camshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 2000 Acura Integra come from 2 brands — APEX and VICTOR REINZ.

Part numbers include APEX ACP101 and VICTOR REINZ 711552200.

This table covers the connecting rods between each piston and the crankshaft. Read more

TOPLINE supplies both parts for the 2000 Acura Integra.

Listed part numbers: TOPLINE CRH18V and TOPLINE CRH18L.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

24 Connecting Rod Bearing parts are listed for the 2000 Acura Integra, from KING ENGINE BEARINGS, MAHLE / CLEVITE, ENGINETECH and 3 other brands. MAHLE / CLEVITE CB1785H carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 12 parts: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1785H.

The Standard Replacement section lists 12 options from MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands — built to original-equipment specification. ENGINETECH BB1003 is listed in this group.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Conversion / Lower Gasket Set parts are listed for the 2000 Acura Integra, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX ACS1018 carries the "Popular" badge.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts for the 2000 Acura Integra come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. The "Popular" part is KING ENGINE BEARINGS MB5259AM.

The High Performance section: 3 options from MAHLE / CLEVITE and KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5259XPC is listed in this group.

Standard Replacement: 7 parts, from TOPLINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 3 other brands. A representative part number is KING ENGINE BEARINGS MB5259AM.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2000 Acura Integra — ARP 2085403.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

11 Crankshaft Repair Sleeve parts for the 2000 Acura Integra come from 7 brands — BCA, TIMKEN, SCHAEFFLER and 4 other brands. The "Popular" part is BCA NS99315.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

30 Crankshaft Seal parts for the 2000 Acura Integra come from 16 brands — VICTOR REINZ, FEL-PRO, APEX and 13 other brands. The "Popular" part is ELRING 586668. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2000 Acura Integra, from APEX, ARP and TOPLINE.

Part numbers include APEX AHB118, ARP 2084303 and TOPLINE HBH18V.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2000 Acura Integra, from ENGINETECH, FEL-PRO, AJUSA and 5 other brands. ENGINETECH HAC32A carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

22 Cylinder Head Gasket Set parts are listed for the 2000 Acura Integra, from AJUSA, FEL-PRO, ITM ENGINE COMPONENTS and 6 other brands. APEX AHS1034 carries the "Popular" badge.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Cylinder Head Plug parts for the 2000 Acura Integra come from 2 brands — JAPANESE OE and MAHLE / CLEVITE.

This group includes JAPANESE OE KF811285 and MAHLE / CLEVITE B32774.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2000 Acura Integra — SBI 2302123.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11419.

This table covers the Engine covers. Read more

One part is listed for the 2000 Acura Integra — TECHPRO AC1228104.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Engine Kit Gasket Set parts are listed for the 2000 Acura Integra, from AJUSA, ENGINETECH, APEX and 1 other brand. ENGINETECH AC32K1 carries the "Popular" badge.

This group includes ENGINETECH AC32K1, ENGINETECH HO16K1 and AJUSA 50180500 and the remaining parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

11 Exhaust Valve parts for the 2000 Acura Integra come from 7 brands — ITM ENGINE COMPONENTS, QUALCAST, SBI and 4 other brands. The "Popular" part is ENGINETECH EM2655.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2000 Acura Integra — DAYCO PBU1170SS20.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

19 Intake Manifold Gasket parts are listed for the 2000 Acura Integra, from MAHLE / CLEVITE, APEX, FEL-PRO and 5 other brands. APEX AMS1360 carries the "Popular" badge.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

17 Intake Valve parts for the 2000 Acura Integra come from 9 brands — ITM ENGINE COMPONENTS, SBI, QUALCAST and 6 other brands. The "Popular" part is BECK/ARNLEY 0213335.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

43 Motor Mount parts for the 2000 Acura Integra come from 7 brands — ANCHOR, WESTAR, SKP and 4 other brands. The "Popular" part is SKP SKM8435. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 37 parts.

This table covers the Motor Mount inserts. Read more

One part is listed for the 2000 Acura Integra — ENERGY SUSPENSION 161106G.

This table covers the Motor Mount kits. Read more

4 Motor Mount Kit parts for the 2000 Acura Integra come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

Listed part numbers: ANCHOR 301214, ANCHOR 301221 and ANCHOR 301219, plus the other parts above.