The 1954 Allard K3 has 39 engine parts with verified fitment on this page — 9 part types and 3 brands, covering all 4 engine options (3.4L L6, 3.6L V8, 3.9L V8 and 5.4L V8). Each part includes a manufacturer part number and application notes.
On the 1954 Allard K3, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Cylinder Head Gasket (13 parts), Engine Kit Gasket Set (9 parts) and Intake Manifold Gasket (5 parts). The other 6 part types cover the remaining 12 parts.
The 1954 Allard K3 was sold with 4 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1954 Allard K3 engine parts are FEL-PRO (17 parts), VICTOR REINZ (16 parts) and MAHLE / CLEVITE (6 parts).
4 parts on this 1954 Allard K3 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO 7526B (Cylinder Head Gasket) and FEL-PRO FS7283B (Engine Kit Gasket Set). Click any part number to see every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.4L V8 | BS40245 | 🇺🇸 US | Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8, 3.9L V8 | 191001901 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 5.4L V8 | 191014701 | 🇺🇸 US | SetRubber | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Crankshaft Seal parts are listed for the 1954 Allard K3, from VICTOR REINZ and FEL-PRO.
This group includes FEL-PRO BS40245, VICTOR REINZ 191001901 and VICTOR REINZ 191014701.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.9L V8 | 7526B | 🇺🇸 US | LeftStandard Bore 3.270 (in) | View on Amazon |
| FEL-PRO Popular Fits: 3.9L V8 | 7525B | 🇺🇸 US | RightStandard Bore 3.270 (in) | View on Amazon |
| FEL-PRO Fits: 3.6L V8 | 7548B | 🇺🇸 US | with 90 Horsepower Enginewith 24 Stud Head | View on Amazon |
| FEL-PRO Fits: 3.6L V8 | 7283B | 🇺🇸 US | with 90 Horsepower Enginewith 24 Stud Head | View on Amazon |
| FEL-PRO Fits: 3.9L V8 | 7525B1 | 🇺🇸 US | Right3.420 (in) Oversize | View on Amazon |
| FEL-PRO Fits: 3.9L V8 | 7526B1 | 🇺🇸 US | Left3.420 (in) Oversize | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V8 | 1084K | 🇺🇸 US | Composite | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V8 | 55142 | 🇺🇸 US | Right3.42 IN Overbore | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V8 | 55147 | 🇺🇸 US | Left3.42 IN Overbore | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 611062200 | 🇺🇸 US | with 24 Stud Headwith Three Large Irregular Water Holes On Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 611062100 | 🇺🇸 US | with 90 Horsepower Enginewith 2 Small Round Water Holes on Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.9L V8 | 611060500 | 🇺🇸 US | Left3.270 IN Bore Diameter | View on Amazon |
| VICTOR REINZ Fits: 3.9L V8 | 611063400 | 🇺🇸 US | Left3.420 IN Bore Diameter | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
13 Cylinder Head Gasket parts for the 1954 Allard K3 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO 7526B.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.9L V8 | HS7525B | 🇺🇸 US | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 3.9L V8 | 021022501 | 🇺🇸 US | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts for the 1954 Allard K3 come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO HS7525B and VICTOR REINZ 021022501.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V8 | FS7283B | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Popular Fits: 3.6L V8 | FS7548B | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Fits: 3.6L V8 | FS7246S2 | 🇺🇸 US | Overhaul Set | View on Amazon |
| FEL-PRO Fits: 3.9L V8 | FS7525B | 🇺🇸 US | Overhaul Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.9L V8 | FS1084K | 🇺🇸 US | Full Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 011032401 | 🇺🇸 US | with 24 Stud Headwith 3 Water Holes On Centerline | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 011033001 | 🇺🇸 US | with 2 Water Holes On Centerlinewith 24 Stud Head | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 011033301 | 🇺🇸 US | with 21 Stud Head | View on Amazon |
| VICTOR REINZ Fits: 3.9L V8 | 011006301 | 🇺🇸 US | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
9 Engine Kit Gasket Set parts for the 1954 Allard K3 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO FS7283B.
Part numbers include FEL-PRO FS7283B, FEL-PRO FS7548B and FEL-PRO FS7246S2, among others listed above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.6L V8 | MS2853 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Fits: 3.9L V8 | MS8903 | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 5.4L V8 | MS20170 | 🇺🇸 US | Composite | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8 | 111036701 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 3.9L V8 | 111036901 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Intake Manifold Gasket parts for the 1954 Allard K3 come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE.
Part numbers include FEL-PRO MS2853, FEL-PRO MS8903 and MAHLE / CLEVITE MS20170, among others listed above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.9L V8 | OS2996C1 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 3.9L V8 | 101006801 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts are listed for the 1954 Allard K3, from FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO OS2996C1 and VICTOR REINZ 101006801.
Oil Pressure Relief Valve Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.4L V8 | 3122 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 5.4L V8 | 711456300 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Oil Pressure Relief Valve. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pressure Relief Valve Gasket parts for the 1954 Allard K3 come from 2 brands — FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO 3122 and VICTOR REINZ 711456300.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.4L V8 | VS38730 | 🇺🇸 US | Cork-Rubber | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 1954 Allard K3 — MAHLE / CLEVITE VS38730.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.6L V8, 3.9L V8 | SS5566 | 🇺🇸 US | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V8, 3.9L V8 | 121016301 | 🇺🇸 US | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts are listed for the 1954 Allard K3, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO SS5566 and VICTOR REINZ 121016301.
Buying Engine Parts for a 1954 Allard K3
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Engine Kit Gasket Set .
Frequently Asked Questions
How many engine parts fit the 1954 Allard K3?
Our catalog currently lists 39 engine parts for the 1954 Allard K3 across 9 subcategories and 3 brands, covering all 4 engine options (3.4L L6, 3.6L V8, 3.9L V8 and 5.4L V8). Each part is matched to the engine(s) it fits.
Do engine parts differ between 1954 Allard K3 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1954 Allard K3?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1954 Allard K3 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1954 Allard K3?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1954 Allard K3
Engine Parts for Other Allard K3 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.