29 Ignition parts are listed for the 1954 Allard K3, in 4 part types, covering all 4 engine options (3.4L L6, 3.6L V8, 3.9L V8 and 5.4L V8). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1954 Allard K3, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. 27 parts of the 29 listed are Spark Plug (17 parts), Ignition Coil (8 parts) and Distributor Mounting Gasket (2 parts). The other 1 part type covers the remaining 2 parts.
The 1954 Allard K3 was sold with 4 engines. 8 parts fit every engine; the other 21 are engine-specific. Each part shows which engine(s) it fits.
14 brands supply ignition parts for the 1954 Allard K3, led by CHAMPION (8 parts), ACDELCO (4 parts) and MOTORCRAFT (3 parts), plus 11 more brands. Quality grades include Economy, Copper / Nickel and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1954 Allard K3. 6 parts have it, including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and ACDELCO R44XL (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Mounting Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 5.4L V8 | 6464 | 🇺🇸 US | Distributor mounting gasket and Distributor shaft seal included | View on Amazon |
| VICTOR REINZ Fits: 5.4L V8 | 711387200 | 🇺🇸 US | View on Amazon |
This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Distributor Mounting Gasket parts are listed for the 1954 Allard K3, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 6464 and VICTOR REINZ 711387200.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1954 K3 engines | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| FVP Fits: all 1954 K3 engines | UC15F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN Fits: all 1954 K3 engines | 2IGC0058 | 🇺🇸 US | View on Amazon | |
| SKP Fits: all 1954 K3 engines | SKUC15T | 🇺🇸 US | Coil Pack | View on Amazon |
| SPECTRA PREMIUM Fits: all 1954 K3 engines | C622 | 🇺🇸 US | PackInternal Resistor Coil | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 1954 K3 engines | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS Fits: all 1954 K3 engines | C15 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: all 1954 K3 engines | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
8 Ignition Coil parts for the 1954 Allard K3 come from 7 brands — STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS UC15T. Every part fits all 4 engine options (3.4L L6, 3.6L V8, 3.9L V8 and 5.4L V8).
The Economy section lists 5 options from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands — the catalog's value-priced group. STANDARD MOTOR PRODUCTS UC15T is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS supply 3 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS UC15.
Part numbers include STANDARD MOTOR PRODUCTS UC15T, FVP UC15F and HOLSTEIN 2IGC0058, among others listed above.
Spark Plug
Summary: Notes include pre-set gaps of 0.024", 0.025", 0.026", 0.030", 0.032", 0.034", 0.035" and 0.040". Replacement brands in this table include CHAMPION, ACDELCO and MOTORCRAFT.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.6L V8, 3.9L V8 | R44XL | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Fits: 3.6L V8 | 516 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: 3.6L V8 | 541 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| MOTORCRAFT Fits: 3.6L V8, 3.9L V8 | SP466 | 🇺🇸 US | Copper | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 3.6L V8, 3.9L V8 | 41832 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.4L L6 | R44XL | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| ACDELCO Popular Fits: 5.4L V8 | R45 | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Popular Fits: 5.4L V8 | 841 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| AUTOLITE Fits: 3.4L L6 | 404 | 🇺🇸 US | Copper ResistorPre-Set Gap: 0.034" | View on Amazon |
| AUTOLITE Fits: 5.4L V8 | 295 | 🇺🇸 US | Copper Non-ResistorPre-Set Gap: 0.030" | View on Amazon |
| CHAMPION Fits: 3.4L L6 | 120 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.026" | View on Amazon |
| CHAMPION Fits: 3.4L L6 | 123 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: 5.4L V8 | 8411 | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: 5.4L V8 | 871 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.03" | View on Amazon |
| CHAMPION Fits: 5.4L V8 | 58 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| MOTORCRAFT Fits: 3.4L L6 | SP466 | 🇺🇸 US | Copper | View on Amazon |
| MOTORCRAFT Fits: 5.4L V8 | SP477 | 🇺🇸 US | Nickel | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
17 Spark Plug parts are listed for the 1954 Allard K3, from CHAMPION, ACDELCO, MOTORCRAFT and 1 other brand. ACDELCO R44XL carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION, ACDELCO and MOTORCRAFT supply 4 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R44XL.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, ACDELCO supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41832.
12 ungrouped parts are not assigned to a grade, with the same engine-level match.
Spark Plug Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 5.4L V8 | 2066C | 🇺🇸 US | Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 5.4L V8 | 181017101 | 🇺🇸 US | Valve Cover | View on Amazon |
This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Spark Plug Tube Seal parts for the 1954 Allard K3 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: MAHLE / CLEVITE 2066C and VICTOR REINZ 181017101.
Buying Ignition Parts for a 1954 Allard K3
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1954 Allard K3?
Our catalog currently lists 29 ignition parts for the 1954 Allard K3 across 4 subcategories and 14 brands, covering all 4 engine options (3.4L L6, 3.6L V8, 3.9L V8 and 5.4L V8). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1954 Allard K3 engines?
Some do. 8 parts fit every engine; the other 21 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1954 Allard K3?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1954 Allard K3?
Notes on this page include pre-set gaps of 0.024", 0.025", 0.026", 0.030", 0.032", 0.034", 0.035" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1954 Allard K3 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1954 Allard K3?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1954 Allard K3
Ignition Parts for Other Allard K3 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.