This page lists 279 engine parts for the 1982 American Motors Eagle, across 61 part types, covering both the 2.5L 151cid L4 and the 4.2L 258cid L6. Every part shows its brand, manufacturer part number and fitment notes.
On the 1982 American Motors Eagle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 53 parts of the 279 listed are Expansion Plug (18 parts), Oil (18 parts) and Oil Filter (17 parts). The other 58 part types cover the remaining 226 parts.
The 1982 American Motors Eagle was sold with both the 2.5L 151cid L4 and the 4.2L 258cid L6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
47 brands supply engine parts for the 1982 American Motors Eagle, led by ENGINETECH (37 parts), MAHLE / CLEVITE (24 parts) and MELLING (22 parts), plus 44 more brands. Quality grades include Standard Replacement, Premium and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1982 American Motors Eagle. 46 parts have it, including ENGINETECH CC402 (Camshaft Bearing) and ENGINETECH BB600J (Connecting Rod Bearing). Each part number opens a page with every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | ES696 | 🇺🇸 US 🇨🇦 CA | Use flat followers | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | SPC10 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the camshafts that open the valves.
2 Camshaft parts are listed for the 1982 American Motors Eagle, from ENGINETECH and MELLING.
This group includes ENGINETECH ES696 and MELLING SPC10.
Camshaft Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | CC402 | 🇺🇸 US 🇨🇦 CA | Full Set | View on Amazon |
| DURA-BOND Fits: 2.5L 151cid L4 | CH16 | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| ENGINE PRO Fits: 2.5L 151cid L4 | 151030 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | SH1030S | 🇺🇸 US 🇨🇦 CA | Full Set | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 1461M | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Camshaft Bearing parts are listed for the 1982 American Motors Eagle, from ENGINETECH, DURA-BOND, ENGINE PRO and 2 other brands. ENGINETECH CC402 carries the "Popular" badge.
Part numbers include ENGINETECH CC402, DURA-BOND CH16 and ENGINE PRO 151030, among others listed above.
Camshaft Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 2.5L 151cid L4 | PG221 | 🇺🇸 US 🇨🇦 CA | Use with PG-220Retainer Bolt | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PG220 | 🇺🇸 US 🇨🇦 CA | Retainer Bolt | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PG223 | 🇺🇸 US 🇨🇦 CA | Retainer Bolt | View on Amazon |
This table covers the Camshaft bolts.
3 Camshaft Bolt parts for the 1982 American Motors Eagle come from PIONEER.
This group includes PIONEER PG221, PIONEER PG220 and PIONEER PG223.
Camshaft Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L 151cid L4 | 555080 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 53.46mmMetric Dia. | View on Amazon |
| DORMAN Fits: 2.5L 151cid L4 | 555076 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 2-9/64"SCMetric Dia. | View on Amazon |
| DORMAN Fits: 2.5L 151cid L4 | 570016 | 🇺🇸 US 🇨🇦 CA | Nominal Size: 2-1/8"Metric Size: 53mm | View on Amazon |
This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
DORMAN supplies the 3 Camshaft Plug parts for the 1982 American Motors Eagle.
This group includes DORMAN 555080, DORMAN 555076 and DORMAN 570016.
Camshaft Shim Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | MG221 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Camshaft Shim washers.
This group shows a single part: MELLING MG221.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | BB600J | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 2.5L 151cid L4 | CB610A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L 151cid L4 | CR4494SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L 151cid L4 | CR4519SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L 151cid L4 | CR4615SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | CB610A4 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | CB1878A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 2500RAA | 🇺🇸 US 🇨🇦 CA | A-Series aluminum bearings | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 42500RAA | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
9 Connecting Rod Bearing parts are listed for the 1982 American Motors Eagle, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. ENGINETECH BB600J carries the "Popular" badge.
Listed part numbers: ENGINETECH BB600J, MAHLE / CLEVITE CB610A and KING ENGINE BEARINGS CR4494SI, plus the other parts above.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 2.5L 151cid L4 | 081010001 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 1982 American Motors Eagle — VICTOR REINZ 081010001.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | BC297J | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 2.5L 151cid L4 | MB5532SI | 🇺🇸 US 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | MS1733A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | MS1733P | 🇺🇸 US 🇨🇦 CA | P Series (Tri-Metal)Set | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 6689MA | 🇺🇸 US 🇨🇦 CA | SetA-Series aluminum bearings | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Crankshaft Main Bearing parts for the 1982 American Motors Eagle come from 4 brands — MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ENGINETECH BC297J.
Listed part numbers: ENGINETECH BC297J, KING ENGINE BEARINGS MB5532SI and MAHLE / CLEVITE MS1733A, plus the other parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 2.5L 151cid L4 | 99176 | 🇺🇸 US 🇨🇦 CA | Front0.563 IN Width | View on Amazon |
| TIMKEN Popular Fits: 2.5L 151cid L4 | KWK99176 | 🇺🇸 US 🇨🇦 CA | Kwik-Sleeve | View on Amazon |
| SCHAEFFLER Fits: 2.5L 151cid L4 | SR3544 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 2.5L 151cid L4 | 99296 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 3.000 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L 151cid L4 | WS99176 | 🇺🇸 US 🇨🇦 CA | Installation Depth: 0.81299999999999994 InShaft Diameter Minimum (In): 1.7609999999999999 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L 151cid L4 | WS99294 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
6 Crankshaft Repair Sleeve parts for the 1982 American Motors Eagle come from 5 brands — WJB / INMOTION PARTS, NATIONAL, TIMKEN and 2 other brands. The "Popular" part is NATIONAL 99176.
This group includes NATIONAL 99176, TIMKEN KWK99176 and SCHAEFFLER SR3544 and the remaining parts above.
Crankshaft Repair Sleeve Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | 16304 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 711620500 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.
2 Crankshaft Repair Sleeve Tool parts for the 1982 American Motors Eagle come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO 16304 and VICTOR REINZ 711620500.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: 2.5L 151cid L4 | 9845 | 🇺🇸 US 🇨🇦 CA | Front0.375 IN Width | View on Amazon |
| TIMKEN Popular Fits: 2.5L 151cid L4 | 9845 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular Fits: 2.5L 151cid L4 | WS9845 | 🇺🇸 US 🇨🇦 CA | Housing Bore: 2.4089999999999998 InInside Diameter: 1.7629999999999999 In | View on Amazon |
| BCA Fits: 2.5L 151cid L4 | NS9845 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | S5125 | 🇺🇸 US 🇨🇦 CA | SILICONE | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | BS40578 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | JV553 | 🇺🇸 US 🇨🇦 CA | RubberSet | View on Amazon |
| NATIONAL Fits: 2.5L 151cid L4 | 3698 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SCHAEFFLER Fits: 2.5L 151cid L4 | SR3932 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER Fits: 2.5L 151cid L4 | SS6282 | 🇺🇸 US 🇨🇦 CA | Rear3.76" O.D. X 0.38" Width | View on Amazon |
| SKF Fits: 2.5L 151cid L4 | 29868 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TIMKEN Fits: 2.5L 151cid L4 | 3698 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 191013801 | 🇺🇸 US 🇨🇦 CA | SetImproved Design | View on Amazon |
| WJB / INMOTION PARTS Fits: 2.5L 151cid L4 | WS3698 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
14 Crankshaft Seal parts for the 1982 American Motors Eagle come from 10 brands — NATIONAL, TIMKEN, WJB / INMOTION PARTS and 7 other brands. The "Popular" part is NATIONAL 9845.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 2.5L 151cid L4 | PG225 | 🇺🇸 US 🇨🇦 CA | 5/16" X 1/2" | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 1982 American Motors Eagle — PIONEER PG225.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | 9405PT1 | 🇺🇸 US 🇨🇦 CA | Permatorque | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 5701 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 611042400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 611061200 | 🇺🇸 US 🇨🇦 CA | Heavy Duty Design | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Cylinder Head Gasket parts are listed for the 1982 American Motors Eagle, from VICTOR REINZ, FEL-PRO and MAHLE / CLEVITE.
Listed part numbers: FEL-PRO 9405PT1, MAHLE / CLEVITE 5701 and VICTOR REINZ 611042400, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | HS8686PT1 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | HS3684 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 021027601 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 1982 American Motors Eagle, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO HS8686PT1, MAHLE / CLEVITE HS3684 and VICTOR REINZ 021027601.
Cylinder Head Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L 151cid L4 | 570012 | 🇺🇸 US 🇨🇦 CA | Metric Size: 47mmMetric Range: 47mm - 50mm | View on Amazon |
This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
This group shows a single part: DORMAN 570012.
Cylinder Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | ESL159 | 🇺🇸 US 🇨🇦 CA | 3/32 X 4.000 X 5.500" | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | CSL1170 | 🇺🇸 US 🇨🇦 CA | 3/32 IN Wall Thickness | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | CSL229 | 🇺🇸 US 🇨🇦 CA | 1/8 IN Wall Thickness | View on Amazon |
This table covers the wear sleeves used to restore a Cylinder seal surface.
3 Cylinder Repair Sleeve parts are listed for the 1982 American Motors Eagle, from MELLING and ENGINETECH.
Listed part numbers: ENGINETECH ESL159, MELLING CSL1170 and MELLING CSL229.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | P151R | 🇺🇸 US 🇨🇦 CA | Rebuilder SetDoes Not Include Rear Main or Valve Stem Seals | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | P151R32 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 011027701 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts are listed for the 1982 American Motors Eagle, from ENGINETECH and VICTOR REINZ.
This group includes ENGINETECH P151R, ENGINETECH P151R32 and VICTOR REINZ 011027701.
Engine Rebuild Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | MKP151RAP | 🇺🇸 US 🇨🇦 CA | Master Rebuild KitPremium | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | RCP151R | 🇺🇸 US 🇨🇦 CA | Recon KitEconomy | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | RCP151RP | 🇺🇸 US 🇨🇦 CA | Recon KitPremium | View on Amazon |
This table covers the Engine rebuild kits.
ENGINETECH supplies the 3 Engine Rebuild Kit parts for the 1982 American Motors Eagle.
This group includes ENGINETECH MKP151RAP, ENGINETECH RCP151R and ENGINETECH RCP151RP.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | V1911 | 🇺🇸 US 🇨🇦 CA | .3414 stem1.500 Head | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | V1437 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 2.5L 151cid L4 | 101437 | 🇺🇸 US 🇨🇦 CA | 1.500 Head Diameter. | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
3 Exhaust Valve parts for the 1982 American Motors Eagle come from 3 brands — ENGINETECH, MELLING and QUALCAST.
This group includes ENGINETECH V1911, MELLING V1437 and QUALCAST 101437.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.5L 151cid L4 | 555087 | 🇺🇸 US 🇨🇦 CA | SteelNominal Dia.: 41.5mm | View on Amazon |
| DORMAN Popular Fits: 2.5L 151cid L4 | 555041 | 🇺🇸 US 🇨🇦 CA | SteelNominal Dia.: 49.58mm | View on Amazon |
| DORMAN Popular Fits: 2.5L 151cid L4 | 570012 | 🇺🇸 US 🇨🇦 CA | Metric Size: 47mmMetric Range: 47mm - 50mm | View on Amazon |
| PIONEER Popular Fits: 2.5L 151cid L4 | EPC41 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| DORMAN Fits: 2.5L 151cid L4 | 565041 | 🇺🇸 US 🇨🇦 CA | Nominal Dia.: 49.58mmMetric Dia. | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | PK42 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | PK42B | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 2193182 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Core Hole Steel 1.983" | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 2193183 | 🇺🇸 US 🇨🇦 CA | Cylinder Block Core Hole Steel 1.632" | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | MPE163R | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | MPE163BR | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | EPS150 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | EPC215 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PE163R | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PE163BR | 🇺🇸 US 🇨🇦 CA | Brass or Steel | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PE163B | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 9774 | 🇺🇸 US 🇨🇦 CA | Steel | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 9774B | 🇺🇸 US 🇨🇦 CA | Brass | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
18 Expansion Plug parts are listed for the 1982 American Motors Eagle, from PIONEER, DORMAN, ENGINETECH and 3 other brands. DORMAN 555087 carries the "Popular" badge.
Harmonic Balancer Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 2.5L 151cid L4 | A228 | 🇺🇸 US 🇨🇦 CA | Nickel Plated Formed Steel | View on Amazon |
| NATIONAL Popular Fits: 2.5L 151cid L4 | 88176 | 🇺🇸 US 🇨🇦 CA | Except flange tear line | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | HS228 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 2.5L 151cid L4 | 16202 | 🇺🇸 US 🇨🇦 CA | Use with Installation Tool | View on Amazon |
| NATIONAL Fits: 2.5L 151cid L4 | 5000 | 🇺🇸 US 🇨🇦 CA | KitNitrile | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | HB4121 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 711347500 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the wear sleeves used to restore a Harmonic Balancer seal surface.
7 Harmonic Balancer Repair Sleeve parts for the 1982 American Motors Eagle come from 6 brands — NATIONAL, MAHLE / CLEVITE, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE A228.
Part numbers include MAHLE / CLEVITE A228, NATIONAL 88176 and ENGINETECH HS228, among others listed above.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | MS90563 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | MS15304 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 111039301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts are listed for the 1982 American Motors Eagle, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO MS90563, MAHLE / CLEVITE MS15304 and VICTOR REINZ 111039301.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | V1910 | 🇺🇸 US 🇨🇦 CA | .3421 stem1.720 Head | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 101438 | 🇺🇸 US 🇨🇦 CA | 1.720 Head Diameter. | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Intake Valve parts for the 1982 American Motors Eagle come from 2 brands — ENGINETECH and QUALCAST.
Listed part numbers: ENGINETECH V1910 and QUALCAST 101438.
Motor Mount
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENERGY SUSPENSION Fits: 2.5L 151cid L4 | 21102G | 🇺🇸 US 🇨🇦 CA | Performance Polyurethane | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL Popular Fits: 2.5L 151cid L4 | A2330 | 🇺🇸 US 🇨🇦 CA | Fits Front Right | View on Amazon |
| ANCHOR Fits: 2.5L 151cid L4 | 2330 | 🇺🇸 US 🇨🇦 CA | Fits Front Leftwith Interlock | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | 602330 | 🇺🇸 US 🇨🇦 CA | Fits Front LeftSedan | View on Amazon |
| WESTAR Fits: 2.5L 151cid L4 | EM2330 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
5 Motor Mount parts for the 1982 American Motors Eagle come from 5 brands — ENERGY SUSPENSION, DEA / MARMON RIDE CONTROL, ANCHOR and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A2330.
The High Performance section lists 1 option from ENERGY SUSPENSION — engineered beyond original-equipment specification. ENERGY SUSPENSION 21102G is listed in this group.
In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A2330.
This group includes DEA / MARMON RIDE CONTROL A2330, ENERGY SUSPENSION 21102G and ANCHOR 2330 and the remaining parts above.
Oil
Summary: Notes list SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include MOBIL and VALVOLINE.
Conventional
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 2.5L 151cid L4 | 797578 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 Conventional1 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | 881156 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 10W-30 ConventionalEasy Pour 5 Quart | View on Amazon |
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.5L 151cid L4 | 125195 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 2.5L 151cid L4 | 124315 | 🇺🇸 US 🇨🇦 CA | 5W-30Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | 122319 | 🇺🇸 US 🇨🇦 CA | 10W-30Mobil 1 Advanced | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | 102990 | 🇺🇸 US 🇨🇦 CA | Extended Performance 10W-30Mobil 1 Extended Performance | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | 112627 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | VV935 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | 881165 | 🇺🇸 US 🇨🇦 CA | Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 2.5L 151cid L4 | 125201 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage 5W-301 Quart | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | 123842 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | 103767 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | 797976 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | VV180 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | 881161 | 🇺🇸 US 🇨🇦 CA | High Mileage with Max Life Technology Synthetic Blend SAE 10W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L 151cid L4 | 881170 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 10W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 2.5L 151cid L4 | 124406 | 🇺🇸 US 🇨🇦 CA | Super 10W-30Mobil Super | View on Amazon |
| MOBIL Popular Fits: 2.5L 151cid L4 | 124407 | 🇺🇸 US 🇨🇦 CA | Super 5W-30Mobil Super | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
18 Oil parts for the 1982 American Motors Eagle come from 2 brands — MOBIL and VALVOLINE. The "Popular" part is MOBIL 125195.
The Conventional section lists 2 options from VALVOLINE — grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. VALVOLINE 797578 is listed in this group.
The Full Synthetic section lists 7 options from MOBIL and VALVOLINE — full-synthetic oils. MOBIL 125195 is listed in this group.
In the High Mileage (>75,000 Miles) grade, VALVOLINE and MOBIL supply 7 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.
The Synthetic Blend section lists 2 options from MOBIL — synthetic-blend oils. MOBIL 124406 is listed in this group.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 2.5L 151cid L4 | 238 | 🇺🇸 US 🇨🇦 CA | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 2.5L 151cid L4 | 153 | 🇺🇸 US 🇨🇦 CA | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 1982 American Motors Eagle.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 2.5L 151cid L4 | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| AGS Fits: 2.5L 151cid L4 | ODP00016 | 🇺🇸 US 🇨🇦 CA | 1/2-20 | View on Amazon |
| DORMAN Fits: 2.5L 151cid L4 | 092018 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.75Twist Style | View on Amazon |
| NEEDA Fits: 2.5L 151cid L4 | 6721361 | 🇺🇸 US 🇨🇦 CA | M12-1.75Single Oversize | View on Amazon |
| NEEDA Fits: 2.5L 151cid L4 | 65213 | 🇺🇸 US 🇨🇦 CA | M12-1.75Single Oversize | View on Amazon |
This table covers the drain plugs in the oil pan.
5 Oil Drain Plug parts for the 1982 American Motors Eagle come from 3 brands — DORMAN, NEEDA and AGS. The "Popular" part is DORMAN 090034.
Part numbers include DORMAN 090034, AGS ODP00016 and DORMAN 092018, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 2.5L 151cid L4 | 2051 | 🇺🇸 US 🇨🇦 CA | Composite | View on Amazon |
| VICTOR REINZ Popular Fits: 2.5L 151cid L4 | 711346200 | 🇺🇸 US 🇨🇦 CA | 0.500 IN Inside Diameter | View on Amazon |
| DORMAN Fits: 2.5L 151cid L4 | 097022 | 🇺🇸 US 🇨🇦 CA | Nylon GasketSize | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | 70822 | 🇺🇸 US 🇨🇦 CA | 0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer | View on Amazon |
| NEEDA Fits: 2.5L 151cid L4 | 67270625 | 🇺🇸 US 🇨🇦 CA | Fits Gaskets Boxed 25 | View on Amazon |
| ULTRA-POWER Fits: 2.5L 151cid L4 | 097022 | 🇺🇸 US 🇨🇦 CA | ID: 0.504"NYLON GASKET | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Drain Plug Gasket parts are listed for the 1982 American Motors Eagle, from MAHLE / CLEVITE, VICTOR REINZ, DORMAN and 3 other brands. MAHLE / CLEVITE 2051 carries the "Popular" badge.
Listed part numbers: MAHLE / CLEVITE 2051, VICTOR REINZ 711346200 and DORMAN 097022, plus the other parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 2.5L 151cid L4 | 31066 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORAD Fits: 2.5L 151cid L4 | MO85 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
2 Oil Filler Cap parts for the 1982 American Motors Eagle come from 2 brands — GATES and MOTORAD.
Part numbers include GATES 31066 and MOTORAD MO85.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 2.5L 151cid L4 | 72132WS | 🇺🇸 US 🇨🇦 CA | Workshop Oil FilterConnection Size: M18X1.5 | View on Amazon |
| CHAMP / LUBER-FINER Popular Fits: 2.5L 151cid L4 | PH47 | 🇺🇸 US 🇨🇦 CA | Inside Diameter: M18 X 1.5 Thread.Spin-On Filter. | View on Amazon |
| FRAM Fits: 2.5L 151cid L4 | FE3387A | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 2.5L 151cid L4 | R1040 | 🇺🇸 US 🇨🇦 CA | Media Material: Synthetic BlendSpin-On Filter | View on Amazon |
| PRO-TEC Fits: 2.5L 151cid L4 | PXL51040 | 🇺🇸 US 🇨🇦 CA | Height: 3.45 InThread Size: M18X1.5 In | View on Amazon |
| VARIOUS MFR Fits: 2.5L 151cid L4 | PG111 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.5L 151cid L4 | UPF47R | 🇺🇸 US 🇨🇦 CA | Gold / Professional SpecialtyULTRAGUARD | View on Amazon |
| FRAM Fits: 2.5L 151cid L4 | XG3387A | 🇺🇸 US 🇨🇦 CA | ULTRA SyntheticSpin-On Oil Filter | View on Amazon |
| MOBIL Fits: 2.5L 151cid L4 | M1101A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
| WIX Fits: 2.5L 151cid L4 | 51040XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest For Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.5L 151cid L4 | PF47E | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentGasket Or Seal Included: YES | View on Amazon |
| WIX Popular Fits: 2.5L 151cid L4 | 51040 | 🇺🇸 US 🇨🇦 CA | Height: 3.45 InThread Size: M18X1.5 In | View on Amazon |
| BOSCH Fits: 2.5L 151cid L4 | 3331 | 🇺🇸 US 🇨🇦 CA | Premium Oil FilterConnection Size: M18X1.5 | View on Amazon |
| CHAMP / LUBER-FINER Fits: 2.5L 151cid L4 | PH47XL | 🇺🇸 US 🇨🇦 CA | Spin-On Filter.XL Synthetic | View on Amazon |
| DENSO Fits: 2.5L 151cid L4 | 1502015 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 2.5L 151cid L4 | LF233 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 2.5L 151cid L4 | PG111EX | 🇺🇸 US 🇨🇦 CA | Extended LifeSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
17 Oil Filter parts for the 1982 American Motors Eagle come from 11 brands — BOSCH, CHAMP / LUBER-FINER, FRAM and 8 other brands. The "Popular" part is BOSCH 72132WS.
The Economy section lists 6 options from BOSCH, CHAMP / LUBER-FINER, FRAM and 3 other brands — the catalog's value-priced group. BOSCH 72132WS is listed in this group.
The High Performance / Heavy Duty section lists 4 options from ACDELCO, FRAM, MOBIL and 1 other brand — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. ACDELCO UPF47R is listed in this group.
Standard Replacement: 7 parts, from ACDELCO, WIX, BOSCH and 4 other brands. A representative part number is ACDELCO PF47E.
Oil Filter Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 2.5L 151cid L4 | PG580 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 2.5L 151cid L4 | PG153 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Oil Filter Bypass Valve parts for the 1982 American Motors Eagle come from PIONEER.
This group includes PIONEER PG580 and PIONEER PG153.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 2.5L 151cid L4 | 103153 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 2.5L 151cid L4 | 501116 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 2.5L 151cid L4 | GMP29A | 🇺🇸 US 🇨🇦 CA | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
3 Oil Pan parts are listed for the 1982 American Motors Eagle, from ATP, PIONEER and SPECTRA PREMIUM.
This group includes ATP 103153, PIONEER 501116 and SPECTRA PREMIUM GMP29A.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | OS30409C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | OS30539X | 🇺🇸 US 🇨🇦 CA | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 101016501 | 🇺🇸 US 🇨🇦 CA | Cork Rubber | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts for the 1982 American Motors Eagle come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
This group includes FEL-PRO OS30409C, MAHLE / CLEVITE OS30539X and VICTOR REINZ 101016501.
Oil Pump
High Volume / Pressure
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | M62CHV | 🇺🇸 US 🇨🇦 CA | High Volume | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 22441239V | 🇺🇸 US 🇨🇦 CA | High Volume | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | EP62C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L 151cid L4 | M62C | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
4 Oil Pump parts for the 1982 American Motors Eagle come from 3 brands — MELLING, SEALED POWER and ENGINETECH.
The High Volume / Pressure section lists 2 options from MELLING and SEALED POWER — grouped under the catalog's "High Volume / Pressure" designation — the notes column spells out what sets them apart. MELLING M62CHV is listed in this group.
Standard Replacement: 2 parts, from ENGINETECH and MELLING. A representative part number is ENGINETECH EP62C.
Part numbers include MELLING M62CHV, SEALED POWER 22441239V and ENGINETECH EP62C, among others listed above.
Oil Pump Drive Gear
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | DG62C | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump Drive gears.
One part is listed for the 1982 American Motors Eagle — MELLING DG62C.
Oil Pump Pickup Tube / Screen
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | 62CS1 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 2.5L 151cid L4 | 22411239 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the pickup tubes and screens that feed the oil pump.
2 Oil Pump Pickup Tube / Screen parts are listed for the 1982 American Motors Eagle, from MELLING and SEALED POWER.
This group includes MELLING 62CS1 and SEALED POWER 22411239.
Oil Pump Repair Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | K62C | 🇺🇸 US 🇨🇦 CA | Use To Repair M-62C Oil PumpUsed To Repair Standard Volume Pump Only | View on Amazon |
This table covers the Oil Pump repair kits.
One part is listed for the 1982 American Motors Eagle — MELLING K62C.
Oil Pump Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | IS62C | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 2.5L 151cid L4 | 22461239 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Pump shafts.
2 Oil Pump Shaft parts for the 1982 American Motors Eagle come from 2 brands — MELLING and SEALED POWER.
Listed part numbers: MELLING IS62C and SEALED POWER 22461239.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Popular Fits: 2.5L 151cid L4 | H547CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | H553CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SILV-O-LITE Fits: 2.5L 151cid L4 | 1528HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedOffset Pin Configuration | View on Amazon |
| SILV-O-LITE Fits: 2.5L 151cid L4 | 1528HCK1 | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedOffset Pin Configuration | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | P3002 | 🇺🇸 US 🇨🇦 CA | Recessed Top | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 498NP | 🇺🇸 US 🇨🇦 CA | Except Display Sizes Only | View on Amazon |
| SILV-O-LITE Fits: 2.5L 151cid L4 | 1532 | 🇺🇸 US 🇨🇦 CA | Offset Pin ConfigurationPress Pin Type | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
7 Piston parts are listed for the 1982 American Motors Eagle, from SEALED POWER, SILV-O-LITE and ENGINETECH. SEALED POWER H547CP carries the "Popular" badge.
The Premium section lists 4 options from SEALED POWER and SILV-O-LITE — a step above OE specification in materials, tolerances or warranty terms. SEALED POWER H547CP is listed in this group.
The Standard Replacement section: 3 options from ENGINETECH, SEALED POWER and SILV-O-LITE. ENGINETECH P3002 is listed in this group.
Listed part numbers: SEALED POWER H547CP, SEALED POWER H553CP and SILV-O-LITE 1528HC, plus the other parts above.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | M40134 | 🇺🇸 US 🇨🇦 CA | Ductile TopPremium | View on Amazon |
| HASTINGS MANUFACTURING Popular Fits: 2.5L 151cid L4 | 2M5663 | 🇺🇸 US 🇨🇦 CA | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 2M5570 | 🇺🇸 US 🇨🇦 CA | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 2M4366 | 🇺🇸 US 🇨🇦 CA | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 41559CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | E384K | 🇺🇸 US 🇨🇦 CA | PremiumRing Groove Widths: 1/16in, 5/64in, 3/16in | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | E381K | 🇺🇸 US 🇨🇦 CA | PremiumRing Groove Widths: 5/64in, 5/64in, 3/16in | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Popular Fits: 2.5L 151cid L4 | 5663 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Phosphate | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 5570 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Phosphate | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 5570S | 🇺🇸 US 🇨🇦 CA | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 2C5663 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L 151cid L4 | 2C5570 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 51559CP | 🇺🇸 US 🇨🇦 CA | SetChrome Facing | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | E384X | 🇺🇸 US 🇨🇦 CA | Ring Groove Widths: 1/16in, 5/64in, 3/16inSet | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
14 Piston Ring parts are listed for the 1982 American Motors Eagle, from HASTINGS MANUFACTURING, SEALED POWER, MAHLE / CLEVITE and 1 other brand. ENGINETECH M40134 carries the "Popular" badge.
The Premium section: 7 options from HASTINGS MANUFACTURING, SEALED POWER, ENGINETECH and 1 other brand. ENGINETECH M40134 is listed in this group.
The Standard Replacement section: 7 options from HASTINGS MANUFACTURING, MAHLE / CLEVITE and SEALED POWER. HASTINGS MANUFACTURING 5663 is listed in this group.
Push Rod Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | PS50153C | 🇺🇸 US 🇨🇦 CA | Includes Grommets | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | PS38792 | 🇺🇸 US 🇨🇦 CA | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 181006501 | 🇺🇸 US 🇨🇦 CA | Improved DesignCork | View on Amazon |
This table covers the Push Rod gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Push Rod Gasket Set parts for the 1982 American Motors Eagle come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO PS50153C, MAHLE / CLEVITE PS38792 and VICTOR REINZ 181006501.
Re-Ring Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | RMP151RBP | 🇺🇸 US 🇨🇦 CA | Re-Main KitPremium | View on Amazon |
This table covers the Re-Ring kits.
This group shows a single part: ENGINETECH RMP151RBP.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | ERK409 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L 151cid L4 | MR865 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 2.5L 151cid L4 | MRK409 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | R894 | 🇺🇸 US 🇨🇦 CA | Includes Arm & 2-pivotsBolts not Included | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
4 Rocker Arm parts for the 1982 American Motors Eagle come from 3 brands — MELLING, ENGINETECH and SEALED POWER.
Part numbers include ENGINETECH ERK409, MELLING MR865 and MELLING MRK409, among others listed above.
Rocker Arm Ball
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L 151cid L4 | MRM1716 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the balls a rocker arm pivots on.
One part is listed for the 1982 American Motors Eagle — MELLING MRM1716.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L 151cid L4 | 2524 | 🇺🇸 US 🇨🇦 CA | Cast | View on Amazon |
| MELLING Popular Fits: 2.5L 151cid L4 | 2542 | 🇺🇸 US 🇨🇦 CA | Cast Iron Gear | View on Amazon |
| CLOYES Fits: 2.5L 151cid L4 | 2542 | 🇺🇸 US 🇨🇦 CA | FrontAdjustable: No | View on Amazon |
| FVP Fits: 2.5L 151cid L4 | 2524 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 2.5L 151cid L4 | ZS2542 | 🇺🇸 US 🇨🇦 CA | CamCrossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
| S.A. GEAR Fits: 2.5L 151cid L4 | 2542 | 🇺🇸 US 🇨🇦 CA | Crossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
This table covers the Timing Cam sprockets.
6 Timing Cam Sprocket parts for the 1982 American Motors Eagle come from 5 brands — CLOYES, MELLING, FVP and 2 other brands. The "Popular" part is CLOYES 2524.
This group includes CLOYES 2524 and MELLING 2542 and the remaining parts above.
Timing Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L 151cid L4 | 635409 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIONEER Fits: 2.5L 151cid L4 | 500258 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing covers.
2 Timing Cover parts are listed for the 1982 American Motors Eagle, from DORMAN and PIONEER.
Listed part numbers: DORMAN 635409 and PIONEER 500258.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L 151cid L4 | TCS13198 | 🇺🇸 US 🇨🇦 CA | Repair Sleeve Not Included | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | TCS45264 | 🇺🇸 US 🇨🇦 CA | with Sleeve 'N' Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | JV1136 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 151025501 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 151017901 | 🇺🇸 US 🇨🇦 CA | SetDoes Not Include RTV | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Timing Cover Gasket parts for the 1982 American Motors Eagle come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO TCS13198.
This group includes FEL-PRO TCS13198, FEL-PRO TCS45264 and MAHLE / CLEVITE JV1136 and the remaining parts above.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 2.5L 151cid L4 | 480177 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKF Fits: 2.5L 151cid L4 | 99176 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.766 In | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
2 Timing Cover Repair Sleeve parts for the 1982 American Motors Eagle come from SKF.
Listed part numbers: SKF 480177 and SKF 99176.
Timing Cover Repair Sleeve Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L 151cid L4 | 16312 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.
This group shows a single part: FEL-PRO 16312.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | S0222 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | 48277SF | 🇺🇸 US 🇨🇦 CA | RubberCamshaft Seal | View on Amazon |
| SKF Fits: 2.5L 151cid L4 | 17286 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Timing Cover Seal parts for the 1982 American Motors Eagle come from 3 brands — ENGINETECH, MAHLE / CLEVITE and SKF.
Listed part numbers: ENGINETECH S0222, MAHLE / CLEVITE 48277SF and SKF 17286.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L 151cid L4 | 2537 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 2.5L 151cid L4 | 2537 | 🇺🇸 US 🇨🇦 CA | Timing Crankshaft Gear | View on Amazon |
| FVP Fits: 2.5L 151cid L4 | 2537 | 🇺🇸 US 🇨🇦 CA | Outer | View on Amazon |
| INA Fits: 2.5L 151cid L4 | ZS2537 | 🇺🇸 US 🇨🇦 CA | Crossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
| S.A. GEAR Fits: 2.5L 151cid L4 | 2537 | 🇺🇸 US 🇨🇦 CA | Crossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
5 Timing Crank Sprocket parts for the 1982 American Motors Eagle come from 5 brands — MELLING, CLOYES, FVP and 2 other brands. The "Popular" part is MELLING 2537.
This group includes MELLING 2537 and the remaining parts above.
Timing Gear Oiler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 2.5L 151cid L4 | PG380 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oilers that spray the timing gears.
This group shows a single part: PIONEER PG380.
Timing Gear Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 2.5L 151cid L4 | 2542S | 🇺🇸 US 🇨🇦 CA | with Aluminum Cam Gear | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | 2542S | 🇺🇸 US 🇨🇦 CA | 2 PIECE | View on Amazon |
| INA Fits: 2.5L 151cid L4 | ZC2542S | 🇺🇸 US 🇨🇦 CA | Matched SetCrossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | 2542S | 🇺🇸 US 🇨🇦 CA | Cast Iron Camshaft Gear | View on Amazon |
| S.A. GEAR Fits: 2.5L 151cid L4 | 2542S | 🇺🇸 US 🇨🇦 CA | Matched SetCrossflow - Intake & Exhaust Manifolds On Opposite Sides | View on Amazon |
This table covers the Timing Gear sets.
5 Timing Gear Set parts are listed for the 1982 American Motors Eagle, from CLOYES, ENGINETECH, INA and 2 other brands. CLOYES 2542S carries the "Popular" badge.
Listed part numbers: CLOYES 2542S and INA ZC2542S, plus the other parts above.
Valve Cover Gasket
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 2.5L 151cid L4 | VS50179T | 🇺🇸 US 🇨🇦 CA | Permadryplus | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 2.5L 151cid L4 | VS39354 | 🇺🇸 US 🇨🇦 CA | Cork-Rubber | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | VS50179C | 🇺🇸 US 🇨🇦 CA | Cork | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | VS50179R | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | VS39354R | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 151059301 | 🇺🇸 US 🇨🇦 CA | SetCork Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 151053501 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 2.5L 151cid L4 | 151059401 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber On Rigid Carrier | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Valve Cover Gasket parts for the 1982 American Motors Eagle come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO VS50179T.
Premium: 1 part, from FEL-PRO. A representative part number is FEL-PRO VS50179T.
Standard Replacement: 7 parts, from VICTOR REINZ, MAHLE / CLEVITE and FEL-PRO. A representative part number is MAHLE / CLEVITE VS39354.
Part numbers include FEL-PRO VS50179T, MAHLE / CLEVITE VS39354 and FEL-PRO VS50179C, among others listed above.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | GD9607H | 🇺🇸 US 🇨🇦 CA | Iron | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | GD9607 | 🇺🇸 US 🇨🇦 CA | Iron | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | GD5607 | 🇺🇸 US 🇨🇦 CA | Iron | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 305607 | 🇺🇸 US 🇨🇦 CA | 2.250 OAL. Plain 0.344 I.D. | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 309607 | 🇺🇸 US 🇨🇦 CA | 2.250 Overall Length. Spiral 0.344 Inside Diameter | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
5 Valve Guide parts for the 1982 American Motors Eagle come from 2 brands — ENGINETECH and QUALCAST. The "Popular" part is ENGINETECH GD9607H.
Listed part numbers: ENGINETECH GD9607H, ENGINETECH GD9607 and ENGINETECH GD5607, plus the other parts above.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SEALED POWER Popular Fits: 2.5L 151cid L4 | HT969 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | L2077 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | JB2077 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 366005 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | HT2077 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
5 Valve Lifter parts for the 1982 American Motors Eagle come from 4 brands — SEALED POWER, ENGINETECH, MELLING and 1 other brand. The "Popular" part is SEALED POWER HT969.
This group includes SEALED POWER HT969, ENGINETECH L2077 and MELLING JB2077 and the remaining parts above.
Valve Seat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | ST16251 | 🇺🇸 US 🇨🇦 CA | Hi-Chrome1.375 X 1.6300 X .2188 | View on Amazon |
| ENGINETECH Popular Fits: 2.5L 151cid L4 | ST18124 | 🇺🇸 US 🇨🇦 CA | Hi-Chrome1.563 X 1.8175 X .2188 | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | ST16251PM | 🇺🇸 US 🇨🇦 CA | Powdered Metal1.375 X 1.6300 X .2188 | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 2016251 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 2018124 | 🇺🇸 US 🇨🇦 CA | INSERT | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 24518124 | 🇺🇸 US 🇨🇦 CA | IntakeLOC: INT. | View on Amazon |
| SEALED POWER Fits: 2.5L 151cid L4 | 24516251N | 🇺🇸 US 🇨🇦 CA | ExhaustLOC: EXH. | View on Amazon |
This table covers the Valve seats.
7 Valve Seat parts are listed for the 1982 American Motors Eagle, from ENGINETECH, QUALCAST and SEALED POWER. ENGINETECH ST16251 carries the "Popular" badge.
Listed part numbers: ENGINETECH ST16251, ENGINETECH ST18124 and ENGINETECH ST16251PM, plus the other parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 2.5L 151cid L4 | ERV685 | 🇺🇸 US 🇨🇦 CA | Fits or Intake and ExhaustIntake and Exhaust 2.109 Free HT | View on Amazon |
| MELLING Fits: 2.5L 151cid L4 | VS170 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 2.5L 151cid L4 | 32685D | 🇺🇸 US 🇨🇦 CA | 2.109 Free Length. with Damper | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
3 Valve Spring parts are listed for the 1982 American Motors Eagle, from ENGINETECH, MELLING and QUALCAST.
Part numbers include ENGINETECH ERV685, MELLING VS170 and QUALCAST 32685D.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 2.5L 151cid L4 | VL200 | 🇺🇸 US 🇨🇦 CA | with Single Groove | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | EPF555HD | 🇺🇸 US 🇨🇦 CA | Heat Treated | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | PF555HD | 🇺🇸 US 🇨🇦 CA | Heat Treated | View on Amazon |
| PIONEER Fits: 2.5L 151cid L4 | SS555HD | 🇺🇸 US 🇨🇦 CA | KitHeat Treated | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 34555 | 🇺🇸 US 🇨🇦 CA | 1 Square Groove. Heat Treated | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
5 Valve Spring Retainer Keeper parts are listed for the 1982 American Motors Eagle, from PIONEER, MELLING, ENGINETECH and 1 other brand. MELLING VL200 carries the "Popular" badge.
Listed part numbers: MELLING VL200, ENGINETECH EPF555HD and PIONEER PF555HD, plus the other parts above.
Valve Stem Oil Seal Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIONEER Fits: 2.5L 151cid L4 | OMT9054 | 🇺🇸 US 🇨🇦 CA | Use with OS-1054 | View on Amazon |
This table covers the Valve Stem Oil Seal tools. This is a service tool, not a wear part — match the application in the notes.
This group shows a single part: PIONEER OMT9054.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 2.5L 151cid L4 | S2927 | 🇺🇸 US 🇨🇦 CA | Outside Diameter: 0.630Seal Type: Positive-Metal Clad | View on Amazon |
| ENGINETECH Popular Fits: 2.5L 151cid L4 | S305V | 🇺🇸 US 🇨🇦 CA | VitonSeal Type: Positive-Metal Clad-OE | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | S2807 | 🇺🇸 US | Viton | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | S2806 | 🇺🇸 US | Premium Silicone | View on Amazon |
| ENGINETECH Fits: 2.5L 151cid L4 | S2926 | 🇺🇸 US 🇨🇦 CA | Outside Diameter: 0.602Seal Type: Positive-Metal Clad | View on Amazon |
| FEL-PRO Fits: 2.5L 151cid L4 | SS72531 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | B45229 | 🇺🇸 US 🇨🇦 CA | Fits IntakeO-Ring Typ | View on Amazon |
| MAHLE / CLEVITE Fits: 2.5L 151cid L4 | SS45229 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 3845045 | 🇺🇸 US 🇨🇦 CA | Guide Inside Diameter (mm): 16.38Viton Umbrella. | View on Amazon |
| QUALCAST Fits: 2.5L 151cid L4 | 3892525 | 🇺🇸 US 🇨🇦 CA | PolyacrylicRing and Band | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
10 Valve Stem Seal parts for the 1982 American Motors Eagle come from 4 brands — ENGINETECH, MAHLE / CLEVITE, QUALCAST and 1 other brand. The "Popular" part is ENGINETECH S2927.
Buying Engine Parts for a 1982 American Motors Eagle
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Expansion Plug and Oil .
Frequently Asked Questions
How many engine parts fit the 1982 American Motors Eagle?
Our catalog currently lists 279 engine parts for the 1982 American Motors Eagle across 61 subcategories and 47 brands, covering both the 2.5L 151cid L4 and the 4.2L 258cid L6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1982 American Motors Eagle engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1982 American Motors Eagle?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 1982 American Motors Eagle?
Oil rows on this page include SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1982 American Motors Eagle was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1982 American Motors Eagle?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1982 American Motors Eagle
Engine Parts for Other American Motors Eagle Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.