1983 American Motors Eagle Engine Parts

This table covers the camshafts that open the valves. Read more

7 Camshaft parts for the 1983 American Motors Eagle come from 2 brands — ENGINETECH and MELLING.

The Heavy Duty / Towing section lists 1 option from ENGINETECH — grouped under the catalog's "Heavy Duty / Towing" designation — the notes column spells out what sets them apart. ENGINETECH ES1122R is listed in this group.

In the Standard Replacement grade, ENGINETECH and MELLING supply 2 parts: built to original-equipment specification. A representative part number is ENGINETECH ES713.

4 further parts sit outside the graded sections, with the same engine-level match.

This group includes ENGINETECH ES1122R, ENGINETECH ES713 and MELLING SRC8 and the remaining parts above.

This table covers the Camshaft & Lifter kits. Read more

2 Camshaft & Lifter Kit parts for the 1983 American Motors Eagle come from MELLING.

This group includes MELLING CLSRC9 and MELLING CLSRC8.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Camshaft Bearing parts for the 1983 American Motors Eagle come from 5 brands — DURA-BOND, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH CC480.

This table covers the Camshaft bolts. Read more

PIONEER supplies the 3 Camshaft Bolt parts for the 1983 American Motors Eagle.

Listed part numbers: PIONEER PG221, PIONEER PG220 and PIONEER PG223.

This table covers the Camshaft hardware kits. Read more

This group shows a single part: ENGINETECH HK113.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

3 Camshaft Plug parts for the 1983 American Motors Eagle come from DORMAN. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: DORMAN 555080, DORMAN 555076 and DORMAN 570016.

This table covers the Camshaft Shim washers. Read more

One part is listed for the 1983 American Motors Eagle — MELLING MG221.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 1983 American Motors Eagle come from ENGINETECH.

This group includes ENGINETECH ECR108 and ENGINETECH ECR110.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

22 Connecting Rod Bearing parts for the 1983 American Motors Eagle come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 1 other brand. The "Popular" part is ENGINETECH BB592J.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 1983 American Motors Eagle come from 3 brands — VICTOR REINZ, AJUSA and FEL-PRO.

This group includes AJUSA 54287000, FEL-PRO CS81692 and VICTOR REINZ 081010001 and the remaining parts above.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 1983 American Motors Eagle come from ENGINETECH.

Part numbers include ENGINETECH 252800 and ENGINETECH 251700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Crankshaft Main Bearing parts are listed for the 1983 American Motors Eagle, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BC297J carries the "Popular" badge.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

11 Crankshaft Repair Sleeve parts are listed for the 1983 American Motors Eagle, from TIMKEN, WJB / INMOTION PARTS, NATIONAL and 2 other brands. NATIONAL 99176 carries the "Popular" badge. 1 part fits every engine; the other 10 are engine-specific.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts are listed for the 1983 American Motors Eagle, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 16304 and VICTOR REINZ 711620500.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

25 Crankshaft Seal parts are listed for the 1983 American Motors Eagle, from NATIONAL, TIMKEN, WJB / INMOTION PARTS and 8 other brands. FEL-PRO BS40612 carries the "Popular" badge. 2 parts fit every engine; the other 23 are engine-specific.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: PIONEER PG225.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts for the 1983 American Motors Eagle come from 5 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Cylinder Head Gasket Set parts for the 1983 American Motors Eagle come from 4 brands — FEL-PRO, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

DORMAN supplies the 3 Cylinder Head Plug parts for the 1983 American Motors Eagle.

Listed part numbers: DORMAN 565069, DORMAN 570012 and DORMAN 116201.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

9 Cylinder Repair Sleeve parts for the 1983 American Motors Eagle come from 2 brands — MELLING and ENGINETECH.

Part numbers include ENGINETECH ESL181, ENGINETECH ESL159 and ENGINETECH ESL120, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies the 4 Engine Block Heater parts for the 1983 American Motors Eagle. 1 part fits every engine; the other 3 are engine-specific.

This group includes KAT'S HEATERS 11609, KAT'S HEATERS 16600 and KAT'S HEATERS 13100 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts for the 1983 American Motors Eagle come from 6 brands — ENGINETECH, MAHLE / CLEVITE, FEL-PRO and 3 other brands. The "Popular" part is FEL-PRO 2601134.

This table covers the Engine rebuild kits. Read more

9 Engine Rebuild Kit parts for the 1983 American Motors Eagle come from ENGINETECH.

Listed part numbers: ENGINETECH MKJ150, ENGINETECH MKJ150P and ENGINETECH RCJ150, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 1983 American Motors Eagle, from QUALCAST, ENGINETECH, MELLING and 1 other brand.

Listed part numbers: ENGINETECH V1911, MELLING V1437 and QUALCAST 101437, plus the other parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

38 Expansion Plug parts for the 1983 American Motors Eagle come from 6 brands — PIONEER, DORMAN, ENGINETECH and 3 other brands. The "Popular" part is DORMAN 555069. A list this long means Expansion Plug applications vary by configuration — the notes carry the qualifiers.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 1983 American Motors Eagle come from 3 brands — ATP, DORMAN and PIONEER.

This group includes ATP 102002, DORMAN 594137 and PIONEER DA240.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

9 Harmonic Balancer Repair Sleeve parts are listed for the 1983 American Motors Eagle, from MAHLE / CLEVITE, NATIONAL, PIONEER and 3 other brands. MAHLE / CLEVITE A228 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE A228, NATIONAL 88176 and ENGINETECH HS228, among others listed above.

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

9 Intake & Exhaust Manifold Gasket Set parts for the 1983 American Motors Eagle come from 5 brands — MAHLE / CLEVITE, FEL-PRO, VICTOR REINZ and 2 other brands. The "Popular" part is MAHLE / CLEVITE MS15510.

Listed part numbers: MAHLE / CLEVITE MS15510, AJUSA 13133700 and FEL-PRO MS92100, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 1983 American Motors Eagle come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

This group includes FEL-PRO MS90563, MAHLE / CLEVITE MS15304 and VICTOR REINZ 111039301.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1983 American Motors Eagle — AJUSA 00808300.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 1983 American Motors Eagle, from QUALCAST, ENGINETECH, SBI and 1 other brand.

Listed part numbers: ENGINETECH V1910, QUALCAST 101438 and QUALCAST 101442, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts are listed for the 1983 American Motors Eagle, from ANCHOR, ENERGY SUSPENSION, DEA / MARMON RIDE CONTROL and 2 other brands. ENERGY SUSPENSION 21102G carries the "Popular" badge. 4 parts fit every engine; the other 3 are engine-specific.

In the High Performance grade, ENERGY SUSPENSION supplies 1 part: engineered beyond original-equipment specification. A representative part number is ENERGY SUSPENSION 21102G.

The Standard Replacement section: 6 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A2330 is listed in this group.

Part numbers include ENERGY SUSPENSION 21102G, DEA / MARMON RIDE CONTROL A2330 and ANCHOR 2571, among others listed above.