This page lists 12 ignition parts for the 1950 Aston Martin DB2, across 1 part type, covering the 2.6L L6 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1950 Aston Martin DB2, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is an Ignition Coil.
The 1950 Aston Martin DB2 came with a single engine, the 2.6L L6, and every part is verified against it.
6 brands supply ignition parts for the 1950 Aston Martin DB2, led by STANDARD MOTOR PRODUCTS (4 parts), FVP (2 parts) and NGK (2 parts), plus 3 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1950 Aston Martin DB2. 3 parts have it, including ACDELCO U505 (Ignition Coil) and NGK 49030 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | UC15F | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| FVP | UC12F | 🇺🇸 US | with 12 Volt Systemwith External Resistor | View on Amazon |
| SKP | SKUC12 | 🇺🇸 US | with 12 Volt Systemfor with External Resistor. | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC12T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | U505 | 🇺🇸 US 🇨🇦 CA | Professional | View on Amazon |
| NGK Popular | 49030 | 🇺🇸 US | 12 voltwith External Resistor | View on Amazon |
| WELLS Popular | 5C1026 | 🇺🇸 US | Requires External Resistor: YES | View on Amazon |
| NGK | 48863 | 🇺🇸 US | 12 VoltInternal Resistor Coil | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15 | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC12 | 🇺🇸 US | with 12 Volt Systemwith External Resistor | View on Amazon |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
12 Ignition Coil parts for the 1950 Aston Martin DB2 come from 6 brands — STANDARD MOTOR PRODUCTS, FVP, NGK and 3 other brands. The "Popular" part is ACDELCO U505.
The Economy section lists 5 options from FVP, STANDARD MOTOR PRODUCTS and SKP — the catalog's value-priced group. FVP UC15F is listed in this group.
In the Standard Replacement grade, NGK, WELLS, STANDARD MOTOR PRODUCTS and 1 other brand supply 7 parts: built to original-equipment specification. A representative part number is ACDELCO U505.
Buying Ignition Parts for a 1950 Aston Martin DB2
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 2.6L L6 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1950 Aston Martin DB2?
Our catalog currently lists 12 ignition parts for the 1950 Aston Martin DB2 across 1 subcategory and 6 brands, covering the 2.6L L6 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1950 Aston Martin DB2?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1950 Aston Martin DB2 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1950 Aston Martin DB2?
Every part on this page is matched to the 2.6L L6 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1950 Aston Martin DB2
Ignition Parts for Other Aston Martin DB2 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.