2016 Audi A1 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2016 Audi A1 has 119 engine parts with verified fitment on this page — 45 part types and 30 brands, covering both the 1.4L L4 Turbocharged and the 1.8L L4 Turbocharged. Each part includes a manufacturer part number and application notes.

On the 2016 Audi A1, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 29 parts of the 119 listed are Oil Filter (15 parts), Crankshaft Seal (8 parts) and Cylinder Head Gasket (6 parts). The other 42 part types cover the remaining 90 parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 15100000
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 1.4L L4 Turbocharged 15101100
🇲🇽 MX
RearCounter Clockwise
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 038970
🇲🇽 MX
Bolt Head-/Nut Design: Male TorxThread Size: M9X1X50
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 54220900
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 54260500
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 798670
🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 1.8L L4 Turbocharged 798660
🇲🇽 MX
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Radial Shaft Seal Design: SP
Fitment notes — ELRING 798660
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Radial Shaft Seal Design: SPSwirl Type: Left-hand Twist
View on
Amazon
AJUSA Fits: 1.4L L4 Turbocharged 15100200
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 1.4L L4 Turbocharged 71008900
🇲🇽 MX
Rear
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 71007200
🇲🇽 MX
Rear
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 248300
🇲🇽 MX
Height [MM]: 8Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Fitment notes — ELRING 248300
Height [MM]: 8Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist
View on
Amazon
VICTOR REINZ Fits: 1.4L L4 Turbocharged 819008200
🇲🇽 MX
Rearwith Flange
Fitment notes — VICTOR REINZ 819008200
Rearwith FlangeReplaces OE Part Number(s) 04E103170A
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Turbocharged 814273700
🇲🇽 MX
FrontReplaces OE Part Number(s) 06L 103 085 B
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Turbocharged 819008100
🇲🇽 MX
RearReplaces OE Part Number(s) 06K103171G
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 81054100
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 81059700
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 323300
🇲🇽 MX
SetBolt Head-/Nut Design: Female Star
Fitment notes — ELRING 323300
SetBolt Head-/Nut Design: Female StarThread Size: M10X1,5x115
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 10202700
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10202700
Multi Layered Steel
75.5 Bore Diameter
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 10202800
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10202800
Multi Layered Steel
83 Bore Diameter
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 008040
🇲🇽 MX
Diameter [MM]: 83,3Installed Thickness [MM]: 0,9
Fitment notes — ELRING 008040
Diameter [MM]: 83,3Installed Thickness [MM]: 0,9Material: Multi-Layer Steel (MLS)
View on
Amazon
MAHLE / CLEVITE Fits: 1.4L L4 Turbocharged 55450
🇲🇽 MX
Multi-Layered Steel
View on
Amazon
VICTOR REINZ Fits: 1.4L L4 Turbocharged 613780000
🇲🇽 MX
Replaces OE Part Number(s) 04E103383AM
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Turbocharged 614216500
🇲🇽 MX
Replaces OE Part Number(s) 06K103383K
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 52430700
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 52498600
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 313201
🇲🇽 MX
Includes Valve Stem SealsInstalled Thickness [MM]: 0,9
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 50392200
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 50449100
🇲🇽 MX
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Harmonic Balancer

Brand Part Number Markets Notes Buy
ATP Fits: 1.8L L4 Turbocharged 102437
🇲🇽 MX
View on
Amazon
DORMAN Fits: 1.8L L4 Turbocharged 594752
🇲🇽 MX
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

High Pressure Diesel Injection Oil Pump (HPOP)

Brand Part Number Markets Notes Buy
MARELLI Fits: all 2016 A1 engines PHP1002
🇲🇽 MX
View on
Amazon

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 Turbocharged 13245500
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 297590
🇲🇽 MX
Material: Fluoroelastomer (FPM)
View on
Amazon
VICTOR REINZ Fits: 1.4L L4 Turbocharged 713420400
🇲🇽 MX
UpperReplaces OE Part Number(s) 036129717E
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Turbocharged 714278600
🇲🇽 MX
Replaces OE Part Number(s) 06K129717A
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Manifold Runner Control Valve / Solenoid

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.8L L4 Turbocharged 702256180
🇲🇽 MX
Switch ValveElectric-Pneumatic
View on
Amazon

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Intermediate Shaft Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 299640
🇲🇽 MX
Outer Diameter [MM]: 32
View on
Amazon

This table covers the seals at the Intermediate Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Motor Mount

Brand Part Number Markets Notes Buy
DEA / MARMON RIDE CONTROL Fits: all 2016 A1 engines AM900
🇲🇽 MX
Front Right
Fitment notes — DEA / MARMON RIDE CONTROL AM900
Front Right
Right
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Oil

Summary: Notes list SAE 0W-40, SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy. Both engines share the same viscosities. Replacement brands in this table include VALVOLINE and VAICO.

Brand Part Number Markets Notes Buy
VALVOLINE Popular Fits: all 2016 A1 engines 787301
🇲🇽 MX
European Vehicle Full Synthetic SAE 5W-301 Quart
View on
Amazon
VALVOLINE Popular Fits: all 2016 A1 engines VV966
🇲🇽 MX
European Vehicle Full Synthetic SAE 5W-401 Quart
View on
Amazon
VAICO Fits: all 2016 A1 engines V600423
🇲🇽 MX
Description: Engine Oil SAE 5W-40 C3 4 L
View on
Amazon
VALVOLINE Fits: all 2016 A1 engines 852518
🇲🇽 MX
European Vehicle Full Synthetic SAE 0W-401 Quart
View on
Amazon
VALVOLINE Fits: all 2016 A1 engines 881166
🇲🇽 MX
European Vehicle Full Synthetic SAE 5W-40Easy Pour 5 Quart
View on
Amazon
VALVOLINE Fits: all 2016 A1 engines 881155
🇲🇽 MX
European Vehicle Full Synthetic SAE 0W-40Easy Pour 5 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.4L L4 Turbocharged 709269260
🇲🇽 MX
Length [mm]: 137Height [mm]: 44
Fitment notes — PIERBURG 709269260
Length [mm]: 137Height [mm]: 44Width [mm]: 89
6 Ribs
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 279610
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
AGS Fits: 1.4L L4 Turbocharged ODP00007
🇲🇽 MX
M14x1.50
View on
Amazon
DORMAN Fits: 1.4L L4 Turbocharged 090169
🇲🇽 MX
StandardThread Size
Fitment notes — DORMAN 090169
StandardThread SizeM14-1.50Under-Head Length: 16mmHead Size: 19mmHead Style: Hex
M14 x 1.50 Thread
View on
Amazon
DORMAN Fits: 1.8L L4 Turbocharged 090090
🇲🇽 MX
Plastic
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 588690
🇲🇽 MX
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Removal Tool

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 Turbocharged 090999
🇲🇽 MX
For GM, Ford, VW, Audi and BMW
View on
Amazon
DORMAN Fits: 1.8L L4 Turbocharged 49822
🇲🇽 MX
View on
Amazon

This table covers the Oil Drain Plug Removal tools. This is a service tool, not a wear part — match the application in the notes.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD Fits: 1.4L L4 Turbocharged MO180
🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP Fits: 1.8L L4 Turbocharged G0396
🇲🇽 MX
Cartridge FilterSynthetic Media or Cellulose Media
Fitment notes — FVP G0396
Cartridge FilterSynthetic Media or Cellulose Media
OE# 06L115562B
View on
Amazon
MARELLI Fits: 1.4L L4 Turbocharged 71760755
🇲🇽 MX
View on
Amazon
PRO-TEC Fits: 1.8L L4 Turbocharged PXL10024
🇲🇽 MX
Media Material: Cellulose
Fitment notes — PRO-TEC PXL10024
Media Material: Cellulose
Cellulose Media
View on
Amazon
PRO-TEC Fits: 1.8L L4 Turbocharged PXL10396
🇲🇽 MX
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Popular Fits: all 2016 A1 engines M1C258A
🇲🇽 MX
Extended PerformanceStyle: Cartridge Lube Metal Free Filter
View on
Amazon
MOBIL Fits: 1.4L L4 Turbocharged M1C258
🇲🇽 MX
Extended Performance15,000 Mile Warranty
Fitment notes — MOBIL M1C258
Extended Performance15,000 Mile WarrantyStyle: Cartridge Lube Metal Free Filter
View on
Amazon
WIX Fits: 1.8L L4 Turbocharged WL10396XP
🇲🇽 MX
XP Extreme DutyBest For Synthetic Motor Oils
Fitment notes — WIX WL10396XP
XP Extreme DutyBest For Synthetic Motor OilsSynthetic Media or Cellulose Media
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MANN Popular Fits: 1.8L L4 Turbocharged HU6013Z
🇲🇽 MX
Height: 4.41 InCellulose Media
Fitment notes — MANN HU6013Z
Height: 4.41 InCellulose MediaSynthetic Media
View on
Amazon
WIX Popular Fits: 1.4L L4 Turbocharged WL7494
🇲🇽 MX
View on
Amazon
WIX Popular Fits: 1.8L L4 Turbocharged WL10396
🇲🇽 MX
Synthetic Media or Cellulose Media
View on
Amazon
FEL-PRO Fits: 1.8L L4 Turbocharged OFCS2025
🇲🇽 MX
Includes Cap and Filter
View on
Amazon
HENGST Fits: 1.4L L4 Turbocharged H314W01
🇲🇽 MX
Spin-on
View on
Amazon
MAHLE / CLEVITE Fits: 1.8L L4 Turbocharged OX1217D
🇲🇽 MX
Cartridge
View on
Amazon
MANN Fits: 1.4L L4 Turbocharged W71294
🇲🇽 MX
Style: Spin-On Lube Filter
View on
Amazon
VARIOUS MFR Fits: 1.8L L4 Turbocharged PG8161EX
🇲🇽 MX
Extended LifeCartridge Filter
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 Turbocharged 921169
🇲🇽 MX
View on
Amazon
MOTORAD Fits: all 2016 A1 engines MO319
🇲🇽 MX
View on
Amazon

This table covers the Oil Filter covers.

Oil Filter Housing Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 279630
🇲🇽 MX
View on
Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.4L L4 Turbocharged 264294
🇲🇽 MX
Lower
View on
Amazon
SPECTRA PREMIUM Fits: 1.4L L4 Turbocharged VWP59A
🇲🇽 MX
LowerGasket and/or Sealant Not Included
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.8L L4 Turbocharged 59016200
🇲🇽 MX
View on
Amazon
ELRING Fits: all 2016 A1 engines 030793
🇲🇽 MX
Dirko HT
Fitment notes — ELRING 030793
Dirko HT
Upper
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 398260
🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 1.8L L4 Turbocharged 711083500
🇲🇽 MX
ACM (Polyacrylate)
Fitment notes — VICTOR REINZ 711083500
ACM (Polyacrylate)
Replaces OE Part Number(s) 06K103649
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING Fits: 1.4L L4 Turbocharged 2N5312
🇲🇽 MX
Full SetTop Ring Surface Treatment: Nitride or Triple Chrome
Fitment notes — HASTINGS MANUFACTURING 2N5312
Full SetTop Ring Surface Treatment: Nitride or Triple Chromefor 2 Ring PistonNitride Top Ring
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Belt

Economy

Brand Part Number Markets Notes Buy
CLOYES Fits: 1.4L L4 Turbocharged B356
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GATES Fits: 1.4L L4 Turbocharged T356
🇲🇽 MX
Power Grip
View on
Amazon

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.

Timing Belt & Component Kit

Economy

Brand Part Number Markets Notes Buy
CLOYES Fits: 1.4L L4 Turbocharged BK356
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GATES Fits: 1.4L L4 Turbocharged TCK356
🇲🇽 MX
Power Grip
View on
Amazon

This table covers the Timing Belt & component kits.

Timing Belt Tensioner

Brand Part Number Markets Notes Buy
CLOYES Fits: 1.4L L4 Turbocharged 96027
🇲🇽 MX
View on
Amazon
GATES Fits: 1.4L L4 Turbocharged T43247
🇲🇽 MX
View on
Amazon
LITENS Fits: 1.4L L4 Turbocharged 979010A
🇲🇽 MX
Interference engine application
View on
Amazon

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Chain & Component Kit

Brand Part Number Markets Notes Buy
INA Fits: 1.8L L4 Turbocharged ZC0196200
🇲🇽 MX
Does Not Include Cam SprocketIncludes 1 Tensioner, 1 Chain, 1 Tensioner Guide, 2 Guides, 1 Chain
Fitment notes — INA ZC0196200
Does Not Include Cam SprocketIncludes 1 Tensioner, 1 Chain, 1 Tensioner Guide, 2 Guides, 1 ChainDoes Not Include Crank Sprocket
with DAJB Engine
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Tensioner O-Ring

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 16524700
🇲🇽 MX
View on
Amazon

This table covers the Timing Chain Tensioner O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Timing Cover

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 231851
🇲🇽 MX
with Crankshaft Seal
View on
Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 77090900
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.4L L4 Turbocharged 77104100
🇲🇽 MX
Upper
View on
Amazon
ELRING Fits: 1.4L L4 Turbocharged 660300
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 302690
🇲🇽 MX
CYLINDER HEAD
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 268000
🇲🇽 MX
CYLINDER HEAD
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 872370
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Idler

Brand Part Number Markets Notes Buy
CLOYES Fits: 1.4L L4 Turbocharged 96028
🇲🇽 MX
View on
Amazon
GATES Fits: 1.4L L4 Turbocharged T42317
🇲🇽 MX
Timing Belt Pulley
View on
Amazon
GMB Fits: 1.4L L4 Turbocharged 4803176
🇲🇽 MX
View on
Amazon

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.

Torque Strut Mount

Brand Part Number Markets Notes Buy
WESTAR Fits: 1.8L L4 Turbocharged EM90055
🇲🇽 MX
Rear
View on
Amazon

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Turbocharger

Brand Part Number Markets Notes Buy
ROTOMASTER Fits: 1.4L L4 Turbocharged M1020119N
🇲🇽 MX
View on
Amazon

This table covers the turbochargers that compress intake air.

Turbocharger Coolant Line

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 Turbocharged 667430
🇲🇽 MX
Return (Turbocharger To Pipe)
View on
Amazon

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Diverter / Bypass Valve

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.8L L4 Turbocharged 702901050
🇲🇽 MX
ElectricValve Type: Solenoid Valve
View on
Amazon

This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged JTC11709
🇲🇽 MX
Mounting Gasket Set
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged JTC11717
🇲🇽 MX
Mounting Gasket Set
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
ELRING Fits: 1.8L L4 Turbocharged 793230
🇲🇽 MX
with gaskets/sealswith Mounting Manual,with Bolts/Screws
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged OP10627
🇲🇽 MX
Supply tube
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged OP10639
🇲🇽 MX
Supply tube
View on
Amazon
DORMAN Fits: 1.8L L4 Turbocharged 667428
🇲🇽 MX
Return
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 11133100
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 461682
🇲🇽 MX
Available as universal article as well, See article No.: 461.682 EL-LIQ 74Material: Zinc-Copper brazing alloy (ZN-CU)
View on
Amazon
VICTOR REINZ Fits: 1.4L L4 Turbocharged 714281300
🇲🇽 MX
Replaces OE Part Number(s) 04E103483G
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: all 2016 A1 engines 85009000
🇲🇽 MX
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.4L L4 Turbocharged 12027800
🇲🇽 MX
4.25 x 7.4 x 10
View on
Amazon
AJUSA Fits: 1.4L L4 Turbocharged 57051200
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.8L L4 Turbocharged 57023600
🇲🇽 MX
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 724590
🇲🇽 MX
Colour: BlackHeight [MM]: 9,3
Fitment notes — ELRING 724590
Colour: BlackHeight [MM]: 9,3Material: FPM (fluoride rubber)Outer Diameter [MM]: 12,2
View on
Amazon
ELRING Fits: 1.8L L4 Turbocharged 235610
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
Fitment notes — ELRING 235610
SetMaterial: FPM (fluoride rubber)Valve Stem Diameter [MM]: 6
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand Part Number Markets Notes Buy
DORMAN Fits: 1.8L L4 Turbocharged 916963
🇲🇽 MX
Adjuster Magnet
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.8L L4 Turbocharged 706117260
🇲🇽 MX
Adjuster MagnetElectric
Fitment notes — PIERBURG 706117260
Adjuster MagnetElectricAdjuster Magnet
View on
Amazon
Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.4L L4 Turbocharged 706117480
🇲🇽 MX
Electric
Fitment notes — PIERBURG 706117480
Electric
Control Valve
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2016 Audi A1

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2016 Audi A1?

Our catalog currently lists 119 engine parts for the 2016 Audi A1 across 45 subcategories and 30 brands, covering both the 1.4L L4 Turbocharged and the 1.8L L4 Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2016 Audi A1 engines?

Some do. 12 parts fit every engine; the other 107 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2016 Audi A1?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2016 Audi A1?

Oil rows on this page include SAE 0W-40, SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Audi A1 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Audi A1?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Audi A1

Engine Parts for Other Audi A1 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.