This page lists 80 engine parts for the 2018 Audi Q7, across 42 part types, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Every part shows its brand, manufacturer part number and fitment notes.
On the 2018 Audi Q7, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 18 parts of the 80 listed are Oil Filter (8 parts), Cylinder Head Gasket (5 parts) and Oil (5 parts). The other 39 part types cover the remaining 62 parts.
The 2018 Audi Q7 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
27 brands supply engine parts for the 2018 Audi Q7, led by AJUSA (20 parts), CLOYES (12 parts) and QUALCAST (6 parts), plus 24 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Audi Q7. 3 parts have it, including VALVOLINE VV966 (Oil) and MANN HU7035Y (Oil Filter). Each part number opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 54261200 | 🇲🇽 MX | Engine # CRTE, CZZA, CVMD, CRTC, CZZB, CVZA, CVEA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2018 Audi Q7 — AJUSA 54261200.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 15088800 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 15097700 | 🇲🇽 MX | Rear85 X 105 X 8 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts for the 2018 Audi Q7 come from AJUSA.
Part numbers include AJUSA 15088800 and AJUSA 15097700.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 81054300 | 🇲🇽 MX | Engine # CRTE,CZZA,CVMD,CRTC,CZZB,CVZA,CVEA | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2018 Audi Q7 — AJUSA 81054300.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 10219100 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 10219110 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 10219120 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 10219200 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 10219210 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies the 5 Cylinder Head Gasket parts for the 2018 Audi Q7.
This group includes AJUSA 10219100, AJUSA 10219110 and AJUSA 10219120 and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 53076900 | 🇲🇽 MX | Complete SetDoes Not Include Cylinder Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2018 Audi Q7 — AJUSA 53076900.
Cylinder Head Temperature Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 3.0L V6 DIESEL Turbocharged | 1814595 | 🇲🇽 MX | Cylinder Head Temperature | View on Amazon |
This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.
This group shows a single part: GPD 1814595.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 3.0L V6 DIESEL Turbocharged | AU1228135 | 🇲🇽 MX | Front Lower | View on Amazon |
This table covers the Engine covers.
One part is listed for the 2018 Audi Q7 — TECHPRO AU1228135.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 51082500 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2018 Audi Q7 — AJUSA 51082500.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 103095 | 🇲🇽 MX | 1.102 Head Dia. 0.235 Stem. 4.012 OAL | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: QUALCAST 103095.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.0L V6 DIESEL Turbocharged | 5T5004 | 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
One part is listed for the 2018 Audi Q7 — WELLS 5T5004.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 3.0L V6 DIESEL Turbocharged | 102375 | 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: 3.0L V6 DIESEL Turbocharged | 594751 | 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Fits: 3.0L V6 DIESEL Turbocharged | 06E105251F | 🇲🇽 MX | Pulley Only | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
3 Harmonic Balancer parts are listed for the 2018 Audi Q7, from ATP, DORMAN and ÜRO PARTS.
This group includes ATP 102375, DORMAN 594751 and ÜRO PARTS 06E105251F.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LARES Fits: 3.0L V6 DIESEL Turbocharged | 34260 | 🇲🇽 MX | Right SideOE # 059129711AF, 059129711AG, 059129711AL, 059129711BP, 059129711BQ, 059129711CG, 059129711CK, 059129711T, 059129711AF, 059129711AG, 059129711AL, 059129711BP, 059129711BQ, 059129711CG, 059129711CK, 059129711T, 06V12970 | View on Amazon |
| SKP Fits: 3.0L V6 DIESEL Turbocharged | SK615003 | 🇲🇽 MX | Left | View on Amazon |
| SKP Fits: 3.0L V6 DIESEL Turbocharged | SK615004 | 🇲🇽 MX | Right | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
3 Intake Manifold parts for the 2018 Audi Q7 come from 2 brands — SKP and LARES.
This group includes LARES 34260, SKP SK615003 and SKP SK615004.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 13265900 | 🇲🇽 MX | Engine # CRTE,CZZA,CVMD,CRTC,CZZB,CVZA,CVEA | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2018 Audi Q7 — AJUSA 13265900.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 01448600 | 🇲🇽 MX | Engine CRTE, CZZA, CVMD, CRTC, CZZB, CVZA, CVEA | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 01448600.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 1013314 | 🇲🇽 MX | 1.333 Head Diameter. | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: QUALCAST 1013314.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL Fits: 3.0L V6 DIESEL Turbocharged | A4955 | 🇲🇽 MX | Front Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L V6 DIESEL Turbocharged | A4956 | 🇲🇽 MX | Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Motor Mount parts for the 2018 Audi Q7 come from DEA / MARMON RIDE CONTROL.
Part numbers include DEA / MARMON RIDE CONTROL A4955 and DEA / MARMON RIDE CONTROL A4956.
Oil
Summary: Notes list SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE and VAICO.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 3.0L V6 DIESEL Turbocharged | VV966 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-401 Quart | View on Amazon |
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V600422 | 🇲🇽 MX | Description: Engine Oil SAE 5W-40 C3 1 L | View on Amazon |
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V600423 | 🇲🇽 MX | Description: Engine Oil SAE 5W-40 C3 4 L | View on Amazon |
| VALVOLINE Fits: 3.0L V6 DIESEL Turbocharged | 881166 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-40Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L V6 DIESEL Turbocharged | 881167 | 🇲🇽 MX | European Vehicle Full Synthetic XL-III SAE 5W-30Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
5 Oil parts for the 2018 Audi Q7 come from 2 brands — VALVOLINE and VAICO. The "Popular" part is VALVOLINE VV966.
Part numbers include VALVOLINE VV966, VAICO V600422 and VAICO V600423, among others listed above.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VEMO Fits: 3.0L V6 DIESEL Turbocharged | V15606075 | 🇲🇽 MX | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
This group shows a single part: VEMO V15606075.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.0L V6 DIESEL Turbocharged | 73668 | 🇲🇽 MX | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2018 Audi Q7 — FEL-PRO 73668.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V104947 | 🇲🇽 MX | M10X1X10Use for the Haldex Coupling | View on Amazon |
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V105828 | 🇲🇽 MX | M14X1,5 | View on Amazon |
This table covers the drain plugs in the oil pan.
2 Oil Drain Plug parts for the 2018 Audi Q7 come from VAICO.
This group includes VAICO V104947 and VAICO V105828.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 22007000 | 🇲🇽 MX | Engine CRTE, CZZA, CVMD, CRTC, CZZB, CVZA, CVEA | View on Amazon |
| DORMAN Fits: 3.0L V6 DIESEL Turbocharged | 095147 | 🇲🇽 MX | SizeM14 | View on Amazon |
| DORMAN Fits: 3.0L V6 DIESEL Turbocharged | 995147CD | 🇲🇽 MX | View on Amazon | |
| JAPANESE OE Fits: 3.0L V6 DIESEL Turbocharged | KW32004 | 🇲🇽 MX | KP | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts are listed for the 2018 Audi Q7, from DORMAN, AJUSA and JAPANESE OE.
This group includes AJUSA 22007000, DORMAN 095147 and DORMAN 995147CD and the remaining parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Fits: 3.0L V6 DIESEL Turbocharged | PXL10345 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MANN Popular Fits: 3.0L V6 DIESEL Turbocharged | HU7035Y | 🇲🇽 MX | Class: AHeight: 4.13 In | View on Amazon |
| WIX Popular Fits: 3.0L V6 DIESEL Turbocharged | WL10345 | 🇲🇽 MX | Style: Cartridge Lube Metal Free Filter | View on Amazon |
| FEL-PRO Fits: 3.0L V6 DIESEL Turbocharged | OFCS2024 | 🇲🇽 MX | Includes Cap and Filter | View on Amazon |
| HENGST Fits: 3.0L V6 DIESEL Turbocharged | E816HD236 | 🇲🇽 MX | Includes Gasket SetCartridge | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 DIESEL Turbocharged | OX1345 | 🇲🇽 MX | Cartridge | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L V6 DIESEL Turbocharged | OX1076D | 🇲🇽 MX | Cartridge | View on Amazon |
| VARIOUS MFR Fits: 3.0L V6 DIESEL Turbocharged | PG9169EX | 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
8 Oil Filter parts for the 2018 Audi Q7 come from 7 brands — MAHLE / CLEVITE, PRO-TEC, MANN and 4 other brands. The "Popular" part is MANN HU7035Y.
The Economy section lists 1 option from PRO-TEC — the catalog's value-priced group. PRO-TEC PXL10345 is listed in this group.
In the Standard Replacement grade, MAHLE / CLEVITE, MANN, WIX and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is MANN HU7035Y.
Part numbers include MANN HU7035Y, PRO-TEC PXL10345 and WIX WL10345, among others listed above.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 3.0L V6 DIESEL Turbocharged | MO323 | 🇲🇽 MX | View on Amazon | |
| SKP Fits: 3.0L V6 DIESEL Turbocharged | SK921223 | 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter covers.
2 Oil Filter Cover parts are listed for the 2018 Audi Q7, from MOTORAD and SKP.
Part numbers include MOTORAD MO323 and SKP SK921223.
Oil Filter Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.0L V6 DIESEL Turbocharged | 926528 | 🇲🇽 MX | OE FIX | View on Amazon |
| HENGST Fits: 3.0L V6 DIESEL Turbocharged | H815H | 🇲🇽 MX | with E816H D230 Filter, Oil Cooler and Bolts/Screws | View on Amazon |
This table covers the Oil Filter housings.
2 Oil Filter Housing parts are listed for the 2018 Audi Q7, from DORMAN and HENGST.
Part numbers include DORMAN 926528 and HENGST H815H.
Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 3.0L V6 DIESEL Turbocharged | 707919140 | 🇲🇽 MX | Number of Teeth: 22Pump Type: Gear Pump | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
This group shows a single part: PIERBURG 707919140.
Oil Pump Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | C550 | 🇲🇽 MX | Engine Oil Pump Chain | View on Amazon |
This table covers the chains that drive the oil pump.
One part is listed for the 2018 Audi Q7 — CLOYES C550.
Oil Pump Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96239 | 🇲🇽 MX | Engine Oil Pump Chain Tensioner | View on Amazon |
This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
This group shows a single part: CLOYES 96239.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | C938 | 🇲🇽 MX | Right | View on Amazon |
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | C940 | 🇲🇽 MX | Left | View on Amazon |
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | C549 | 🇲🇽 MX | Center | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
CLOYES supplies the 3 Timing Chain parts for the 2018 Audi Q7.
Part numbers include CLOYES C938, CLOYES C940 and CLOYES C549.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 90549SX | 🇲🇽 MX | Does Not Include SprocketsIncludes Timing Chain Tensioner (3), Timing Chain Guide (3), Oil Pump Chain Tensioner, Timing Chain (3), Oil Pump Chain | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
This group shows a single part: CLOYES 90549SX.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96006 | 🇲🇽 MX | Engine Timing Chain Guide | View on Amazon |
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96238 | 🇲🇽 MX | Engine Timing Chain Guide | View on Amazon |
| ÜRO PARTS Fits: 3.0L V6 DIESEL Turbocharged | 079109470 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
3 Timing Chain Guide / Damper parts are listed for the 2018 Audi Q7, from CLOYES and ÜRO PARTS.
Part numbers include CLOYES 96006, CLOYES 96238 and ÜRO PARTS 079109470.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96002 | 🇲🇽 MX | Engine Timing Chain Tensioner | View on Amazon |
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96237 | 🇲🇽 MX | Engine Timing Chain Tensioner | View on Amazon |
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | 96007 | 🇲🇽 MX | Engine Timing Chain Tensioner | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
3 Timing Chain Tensioner parts for the 2018 Audi Q7 come from CLOYES.
This group includes CLOYES 96002, CLOYES 96237 and CLOYES 96007.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L V6 DIESEL Turbocharged | S1192 | 🇲🇽 MX | Engine Timing Idler Sprocket | View on Amazon |
This table covers the Timing Idler sprockets.
One part is listed for the 2018 Audi Q7 — CLOYES S1192.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | JTC12303 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2018 Audi Q7 — AJUSA JTC12303.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | OP11091 | 🇲🇽 MX | Engine Code CRTC, CVMD, Cvea, Crte, Czza, CZZB, CvzaSupply Tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
This group shows a single part: AJUSA OP11091.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V109193 | 🇲🇽 MX | Grade: AMFrom 27/07/2018 | View on Amazon |
| VAICO Fits: 3.0L V6 DIESEL Turbocharged | V109194 | 🇲🇽 MX | Grade: AMFrom 27/07/2018 | View on Amazon |
This table covers the Valve covers.
VAICO supplies both parts for the 2018 Audi Q7.
Part numbers include VAICO V109193 and VAICO V109194.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 56060600 | 🇲🇽 MX | RightEngine # Crte, Czza, CVMD, CRTC, CZZB, Cvza, Cvea | View on Amazon |
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 56060700 | 🇲🇽 MX | LeftEngine # Crte, Czza, CVMD, CRTC, CZZB, Cvza, Cvea | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 2018 Audi Q7 come from AJUSA.
This group includes AJUSA 56060600 and AJUSA 56060700.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 3103419 | 🇲🇽 MX | 1.415 OAL. 0.236 I.D. 0.436 O.D. Mang. Bronze | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
This group shows a single part: QUALCAST 3103419.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 85020500 | 🇲🇽 MX | Engine # CRTE,CZZA,CVMD,CRTC,CZZB,CVZA,CVEA | View on Amazon |
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 368521 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
2 Valve Lifter parts for the 2018 Audi Q7 come from 2 brands — AJUSA and QUALCAST.
Part numbers include AJUSA 85020500 and QUALCAST 368521.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 345021 | 🇲🇽 MX | 3 Round Beads. 0.234 Stem | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
One part is listed for the 2018 Audi Q7 — QUALCAST 345021.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L V6 DIESEL Turbocharged | 57057800 | 🇲🇽 MX | Engine # CRTE,CZZA,CVMD,CRTC,CZZB,CVZA,CVEA | View on Amazon |
| QUALCAST Fits: 3.0L V6 DIESEL Turbocharged | 38967545 | 🇲🇽 MX | Height (mm): 10.03Viton Metal Clad | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts for the 2018 Audi Q7 come from 2 brands — AJUSA and QUALCAST.
Listed part numbers: AJUSA 57057800 and QUALCAST 38967545.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Fits: 3.0L V6 DIESEL Turbocharged | 2VTS0083 | 🇲🇽 MX | View on Amazon | |
| SPECTRA PREMIUM Fits: 3.0L V6 DIESEL Turbocharged | VTS1146 | 🇲🇽 MX | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Audi Q7 come from 2 brands — HOLSTEIN and SPECTRA PREMIUM.
This group includes HOLSTEIN 2VTS0083 and SPECTRA PREMIUM VTS1146.
Variable Valve Timing (VVT) Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ÜRO PARTS Fits: 3.0L V6 DIESEL Turbocharged | 06E109084N | 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
This group shows a single part: ÜRO PARTS 06E109084N.
Buying Engine Parts for a 2018 Audi Q7
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Cylinder Head Gasket .
Frequently Asked Questions
How many engine parts fit the 2018 Audi Q7?
Our catalog currently lists 80 engine parts for the 2018 Audi Q7 across 42 subcategories and 27 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 DIESEL Turbocharged and 3.0L V6 Supercharged). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2018 Audi Q7 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2018 Audi Q7?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2018 Audi Q7?
Oil rows on this page include SAE 5W-30 and SAE 5W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Audi Q7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Audi Q7?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Audi Q7
Engine Parts for Other Audi Q7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.