2025 Audi Q7 Drivetrain Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2025 Audi Q7 has 11 drivetrain parts with verified fitment on this page — 5 part types and 4 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Each part includes a manufacturer part number and application notes.

The drivetrain system on the 2025 Audi Q7 moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. The largest groups are CV Joint Boot (4 parts), Gear Oil (4 parts) and CV Axle (1 part). The other 2 part types cover the remaining 2 parts.

CV Axle

Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Turbocharged 306465
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontLength 500 mm
View on
Amazon

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.

CV Joint

Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Turbocharged 306277
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Pre-lubricatedThermosplastic Elastomer (TPE)
Fitment notes — GKN 306277
Pre-lubricatedThermosplastic Elastomer (TPE)
Front OuterLength 42 mm
View on
Amazon

This table covers the constant-velocity joints at each end of a drive axle.

CV Joint Boot

Brand Part Number Markets Notes Buy
BECK/ARNLEY Fits: 3.0L V6 Turbocharged 1033141
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Outer
View on
Amazon
GKN Fits: 3.0L V6 Turbocharged 306177
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OUTER Diameter 1.220 InThermoplastic Elastomer
Fitment notes — GKN 306177
OUTER Diameter 1.220 InThermoplastic Elastomer
Front Outer
View on
Amazon
GKN Fits: 3.0L V6 Turbocharged 306188
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OUTER Diameter 1.063 InThermoplastic Elastomer
Fitment notes — GKN 306188
OUTER Diameter 1.063 InThermoplastic Elastomer
Front Innerwithout alternative drive system
View on
Amazon
REIN Fits: 3.0L V6 Turbocharged BKN0109
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Outer
View on
Amazon

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.

Drive Shaft

Brand Part Number Markets Notes Buy
GKN Fits: 3.0L V6 Turbocharged GKNP20075
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Shaft Material: Two-piece Propellershaft fitted with CV Joints, holding frameOverall Length [mm]: 1719
Fitment notes — GKN GKNP20075
Shaft Material: Two-piece Propellershaft fitted with CV Joints, holding frameOverall Length [mm]: 1719Teeth: 25TPC Ø [mm]: 86,0BoreØ[mm]: 6x8,1
View on
Amazon

This table covers the driveshafts that carry torque from the transmission or transfer case.

Gear Oil

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 3.0L V6 Turbocharged VV975
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart
Fitment notes — VALVOLINE VV975
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Quart
Front Differential
View on
Amazon
VALVOLINE Fits: 3.0L V6 Turbocharged 889785
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill
Fitment notes — VALVOLINE 889785
Full Synthetic SAE 75W-90 Gear Oil1 Quart Flex Fill
Front Differential
View on
Amazon
VALVOLINE Fits: 3.0L V6 Turbocharged 882505
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon
Fitment notes — VALVOLINE 882505
Advanced Full Synthetic SAE 75W-90 Gear Oil1 Gallon
Front Differential
View on
Amazon
VALVOLINE Fits: 3.0L V6 Turbocharged 723856
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon
Fitment notes — VALVOLINE 723856
Advanced Full Synthetic SAE 75W-90 Gear Oil5 Gallon
Front Differential
View on
Amazon

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle.

Buying Drivetrain Parts for a 2025 Audi Q7

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: CV Joint Boot and Gear Oil .

Frequently Asked Questions

How many drivetrain parts fit the 2025 Audi Q7?

Our catalog currently lists 11 drivetrain parts for the 2025 Audi Q7 across 5 subcategories and 4 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Each part is matched to the engine(s) it fits.

Do drivetrain parts differ between 2025 Audi Q7 engines?

Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of drivetrain problems on a 2025 Audi Q7?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 Audi Q7 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2025 Audi Q7?

First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2025 Audi Q7

Drivetrain Parts for Other Audi Q7 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.