This page lists 17 ignition parts for the 2025 Audi Q7, across 4 part types, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.
On the 2025 Audi Q7, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Camshaft Position Sensor (6 parts), Ignition Coil (5 parts) and Crankshaft Position Sensor (3 parts). The other 1 part type covers the remaining 3 parts.
The 2025 Audi Q7 was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2025 Audi Q7 ignition parts are STANDARD MOTOR PRODUCTS (3 parts), WELLS (3 parts) and HOLSTEIN (2 parts), plus 8 more brands. Quality grades include Standard Replacement and Economy.
3 parts on this 2025 Audi Q7 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including HOLSTEIN 2CAM0327 (Camshaft Position Sensor) and BOSCH 0986221072 (Ignition Coil). Click any part number to see every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Popular Fits: 3.0L V6 Turbocharged | 2CAM0327 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Popular Fits: 3.0L V6 Turbocharged | 2352067 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor OnlyConnector Shape: Oval | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | PC1217 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VNE Fits: 3.0L V6 Turbocharged | 40057234 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaustwith Special Upgrade [GP1] | View on Amazon |
| WELLS Fits: 3.0L V6 Turbocharged | 5S17944 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bank 2 | View on Amazon |
| WELLS Fits: 3.0L V6 Turbocharged | 5S17945 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Bank 1 | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
6 Camshaft Position Sensor parts are listed for the 2025 Audi Q7, from WELLS, HOLSTEIN, WALKER PRODUCTS and 2 other brands. HOLSTEIN 2CAM0327 carries the "Popular" badge.
In the Economy grade, HOLSTEIN supplies 1 part: the catalog's value-priced group. A representative part number is HOLSTEIN 2CAM0327.
The Standard Replacement section lists 2 options from WALKER PRODUCTS and STANDARD MOTOR PRODUCTS — built to original-equipment specification. WALKER PRODUCTS 2352067 is listed in this group.
3 ungrouped parts are not assigned to a grade, with the same engine-level match.
This group includes HOLSTEIN 2CAM0327, WALKER PRODUCTS 2352067 and STANDARD MOTOR PRODUCTS PC1217 and the remaining parts above.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | PC1146 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 3.0L V6 Turbocharged | 2352119 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS Fits: 3.0L V6 Turbocharged | 5S16169 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Crankshaft Position Sensor parts are listed for the 2025 Audi Q7, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS PC1146, WALKER PRODUCTS 2352119 and WELLS 5S16169.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Fits: 3.0L V6 Turbocharged | 2IGC0516 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 3.0L V6 Turbocharged | 0986221072 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 3.0L V6 Turbocharged | 1788574 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| DENSO Fits: 3.0L V6 Turbocharged | 6739206 | 🇺🇸 US 🇨🇦 CA | Direct Ignition Coil or Coil On Plug | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.0L V6 Turbocharged | UF716 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
5 Ignition Coil parts are listed for the 2025 Audi Q7, from HOLSTEIN, BOSCH, BECK/ARNLEY and 2 other brands. BOSCH 0986221072 carries the "Popular" badge.
Economy: 1 part, from HOLSTEIN. A representative part number is HOLSTEIN 2IGC0516.
The Standard Replacement section: 4 options from BOSCH, BECK/ARNLEY, DENSO and 1 other brand. BOSCH 0986221072 is listed in this group.
Part numbers include BOSCH 0986221072, HOLSTEIN 2IGC0516 and BECK/ARNLEY 1788574, among others listed above.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE Fits: 3.0L V6 Turbocharged | XP3924 | 🇺🇸 US | Iridium XP Spark Plug Dual Display PackPre-Set Gap: 0.044" | View on Amazon |
| NGK Fits: 3.0L V6 Turbocharged | 93560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Laser Iridium High Ignitability | View on Amazon |
| SKP Fits: 3.0L V6 Turbocharged | SP1013 | 🇺🇸 US | Iridium XP | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
3 Spark Plug parts for the 2025 Audi Q7 come from 3 brands — AUTOLITE, NGK and SKP.
This group includes AUTOLITE XP3924, NGK 93560 and SKP SP1013.
Buying Ignition Parts for a 2025 Audi Q7
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2025 Audi Q7?
Our catalog currently lists 17 ignition parts for the 2025 Audi Q7 across 4 subcategories and 11 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2025 Audi Q7 engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2025 Audi Q7?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2025 Audi Q7?
Notes on this page include pre-set gaps of 0.028", 0.031" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 Audi Q7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 Audi Q7?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 Audi Q7
Ignition Parts for Other Audi Q7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.