2026 Audi Q7 Cooling System Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 24 cooling system parts for the 2026 Audi Q7, across 11 part types, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.

On the 2026 Audi Q7, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. Most of the listed parts are Water Pump (9 parts), Coolant / Antifreeze (4 parts) and Coolant Reservoir Cap (2 parts). The other 8 part types cover the remaining 9 parts.

Coolant / Antifreeze

Economy

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.0L L4 Turbocharged 719009
🇺🇸 US 🇨🇦 CA
Multi-Vehicle Yellow1 Gallon
View on
Amazon

Heavy Duty

Brand Part Number Markets Notes Buy
PRESTONE Fits: all 2026 Q7 engines AFC12100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Command Nitrite Free Extended Life CoolantYellow Nitrite Free OAT
Fitment notes — PRESTONE AFC12100
Command Nitrite Free Extended Life CoolantYellow Nitrite Free OAT1 GAL Ready To Use 50/50
Heavy Duty & Mixed Fleet Nitrite Free Extended Life CoolantYellow Fluid Class 1 - 8
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VALVOLINE Fits: all 2026 Q7 engines 904683
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
HT-12 Pink1 Gallon
Fitment notes — VALVOLINE 904683
HT-12 Pink1 Gallon
(Type: Concentrated)
View on
Amazon
Brand Part Number Markets Notes Buy
PRESTONE Fits: all 2026 Q7 engines 78065
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Heavy Duty
Fitment notes — PRESTONE 78065
Heavy Duty
Heavy Duty & Mixed Fleet Nitrite Free Extended Life CoolantYellow Fluid Class 1 - 8
View on
Amazon

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.

Coolant Hose / Pipe

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged CHP0663
🇺🇸 US 🇨🇦 CA
Pipe
Fitment notes — REIN CHP0663
Pipe
Oil Cooler To Thermostat
View on
Amazon

This table covers the hard pipes and extra hoses in the coolant circuit.

Coolant Hose Connector / Flange

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged CHC0744
🇺🇸 US 🇨🇦 CA
Radiator Hose (Lower) To Heater Control Valve Hose
View on
Amazon

This table covers the Coolant Hose Connector flanges.

Coolant Reservoir

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged EPT0283
🇺🇸 US 🇨🇦 CA
without CAP
View on
Amazon

This table covers the overflow / expansion tanks that hold extra coolant.

Coolant Reservoir Cap

Brand Part Number Markets Notes Buy
CALORSTAT Fits: 3.0L V6 Turbocharged RC0162
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Maximum Pressure Rating: 23.0 PS
View on
Amazon
MOTORAD Fits: all 2026 Q7 engines T111
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Standard
Fitment notes — MOTORAD T111
Standard
Relief Pressure 23 lbs
View on
Amazon

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Intercooler

Brand Part Number Markets Notes Buy
TYC Fits: 3.0L V6 ELECTRIC/GAS Turbocharged, 3.0L V6 Turbocharged 18135
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Left Side
View on
Amazon

This table covers the intercoolers that cool turbo or supercharger charge air.

Radiator Insulator Sleeve

Brand Part Number Markets Notes Buy
REIN Fits: all 2026 Q7 engines AVM0730
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Radiator Insulator sleeves.

Radiator Mount

Brand Part Number Markets Notes Buy
REIN Fits: all 2026 Q7 engines AVM0729
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Upper
View on
Amazon

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Temperature Sender / Sensor

Brand Part Number Markets Notes Buy
HELLA Fits: 2.0L L4 Turbocharged 009309331
🇺🇸 US
2-Pin ConnectorPlugged
Fitment notes — HELLA 009309331
2-Pin ConnectorPluggedColor: Black or Gray
without Sealwithout Retaining RingLocation: Radiator Coolant Hose
View on
Amazon
HOLSTEIN Fits: 3.0L V6 ELECTRIC/GAS Turbocharged, 3.0L V6 Turbocharged 2CTS0163
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Lower
View on
Amazon

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender.

Thermostat / Thermostat Housing / Water Outlet Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 2.0L L4 Turbocharged C33480
🇺🇸 US 🇨🇦 CA
Molded Rubber
Fitment notes — MAHLE / CLEVITE C33480
Molded Rubber
Engine Side
View on
Amazon

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Water Pump

Economy

Brand Part Number Markets Notes Buy
REIN Fits: 2.0L L4 Turbocharged, 3.0L V6 Turbocharged WPA0541
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits HeaterAuxiliaryor From Oil Cooler
Fitment notes — REIN WPA0541
Fits:
HeaterAuxiliaryor From Oil CoolerAuxiliary
To TurbochargerAuxiliary
View on
Amazon
REIN Fits: 3.0L V6 Turbocharged WPA0555
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
HeaterAuxiliary
View on
Amazon
US MOTOR WORKS Fits: 2.0L L4 Turbocharged US8124
🇺🇸 US
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GATES Popular Fits: 3.0L V6 Turbocharged 41568E
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Electric
Fitment notes — GATES 41568E
Electric
To TurbochargerAuxiliary
View on
Amazon
GATES Popular Fits: 3.0L V6 Turbocharged 41606E
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Electric
Fitment notes — GATES 41606E
Electric
HeaterAuxiliary
View on
Amazon
SALERI Fits: 2.0L L4 Turbocharged PA1532
🇺🇸 US 🇨🇦 CA
MechanicalNon-switchable water pump
View on
Amazon
SALERI Fits: 3.0L V6 Turbocharged PE1620
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Electric
Fitment notes — SALERI PE1620
Electric
LeftAuxiliary
View on
Amazon
Brand Part Number Markets Notes Buy
HELLA Fits: 2.0L L4 Turbocharged, 3.0L V6 Turbocharged 358304701
🇺🇸 US
Fits Premium or Premium PlusATF Cooling
Fitment notes — HELLA 358304701
Fits:
Premium or Premium PlusATF CoolingAuxiliaryor Premium or PrestigeHVAC SystemAuxiliary
Turbocharger CoolingAuxiliary
View on
Amazon
HELLA Fits: 3.0L V6 Turbocharged 358304711
🇺🇸 US
HVAC SystemAuxiliary
View on
Amazon

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off.

Buying Cooling System Parts for a 2026 Audi Q7

On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.

  • Match the engine first. Some cooling system parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Water Pump and Coolant / Antifreeze .

Frequently Asked Questions

How many cooling system parts fit the 2026 Audi Q7?

Our catalog currently lists 24 cooling system parts for the 2026 Audi Q7 across 11 subcategories and 12 brands, covering all 3 engine options (2.0L L4 Turbocharged, 3.0L V6 ELECTRIC/GAS Turbocharged and 3.0L V6 Turbocharged). Each part is matched to the engine(s) it fits.

Do cooling system parts differ between 2026 Audi Q7 engines?

Some do. 6 parts fit every engine; the other 18 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of cooling system problems on a 2026 Audi Q7?

Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Audi Q7 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2026 Audi Q7?

First match the engine — each row shows which engine(s) the part fits. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2026 Audi Q7

Cooling System Parts for Other Audi Q7 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.