4 Cooling system parts are listed for the 2026 Audi S5, in 4 part types, covering the 3.0L V6 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The cooling system system on the 2026 Audi S5 keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Coolant / Antifreeze (1 part), Coolant Reservoir Cap (1 part) and Radiator Insulator Sleeve (1 part). The other 1 part type covers the remaining 1 part.
The 2026 Audi S5 came with a single engine, the 3.0L V6 Turbocharged, and every part is verified against it.
2 brands supply cooling system parts for the 2026 Audi S5, led by REIN (3 parts) and VALVOLINE (1 part).
Each part number listed for the 2026 Audi S5 opens a page with every vehicle that part fits.
Coolant / Antifreeze
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE | 904683 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | HT-12 Pink1 Gallon | View on Amazon |
This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.
One part is listed for the 2026 Audi S5 — VALVOLINE 904683.
Coolant Reservoir Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | CPE0039 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
This group shows a single part: REIN CPE0039.
Radiator Insulator Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | AVM0730 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Radiator Insulator sleeves.
This group shows a single part: REIN AVM0730.
Radiator Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | AVM0729 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Center Upper | View on Amazon |
This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: REIN AVM0729.
Buying Cooling System Parts for a 2026 Audi S5
On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.
- Confirm you have the 3.0L V6 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Coolant / Antifreeze and Coolant Reservoir Cap .
Frequently Asked Questions
How many cooling system parts fit the 2026 Audi S5?
Our catalog currently lists 4 cooling system parts for the 2026 Audi S5 across 4 subcategories and 2 brands, covering the 3.0L V6 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of cooling system problems on a 2026 Audi S5?
Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Audi S5 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2026 Audi S5?
Every part on this page is matched to the 3.0L V6 Turbocharged engine. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2026 Audi S5
Cooling System Parts for Other Audi S5 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.