The 1967 Austin-Healey Sprite has 11 ignition parts with verified fitment on this page — 4 part types and 4 brands, covering both the 1.1L L4 and the 1.3L L4. Each part includes a manufacturer part number and application notes.
On the 1967 Austin-Healey Sprite, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Breaker Points (4 parts), Condenser / Capacitor (3 parts) and Distributor Cap (2 parts). The other 1 part type covers the remaining 2 parts.
The 1967 Austin-Healey Sprite was sold with both the 1.1L L4 and the 1.3L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
4 brands supply ignition parts for the 1967 Austin-Healey Sprite, led by STANDARD MOTOR PRODUCTS (5 parts), WELLS (4 parts) and FAMOUS BRAND (1 part), plus 1 more brand. Quality grades include Standard Replacement and Economy.
Each part number listed for the 1967 Austin-Healey Sprite opens a page with every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.3L L4 | LU206T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.3L L4 | LU206 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: 1.3L L4 | 5H1011 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
3 Condenser / Capacitor parts for the 1967 Austin-Healey Sprite come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS LU206T is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS and WELLS supply 2 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS LU206.
Listed part numbers: STANDARD MOTOR PRODUCTS LU206T, STANDARD MOTOR PRODUCTS LU206 and WELLS 5H1011.
Distributor Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.3L L4 | LU420 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: 1.3L L4 | 5D1040 | 🇺🇸 US | with Lucas Ignition | View on Amazon |
This table covers the Distributor caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
2 Distributor Cap parts are listed for the 1967 Austin-Healey Sprite, from STANDARD MOTOR PRODUCTS and WELLS.
Listed part numbers: STANDARD MOTOR PRODUCTS LU420 and WELLS 5D1040.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.3L L4 | LU300 | 🇺🇸 US | View on Amazon | |
| WELLS Fits: 1.3L L4 | 4R1187 | 🇺🇸 US | with Lucas Distributor | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
2 Distributor Rotor parts are listed for the 1967 Austin-Healey Sprite, from STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS LU300 and WELLS 4R1187.
Ignition Breaker Points
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FAMOUS BRAND Fits: 1.3L L4 | ANA1004 | 🇺🇸 US 🇨🇦 CA | Contact Setwith Lucas Distributor | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FACET Fits: 1.3L L4 | 14683MHDV | 🇺🇸 US | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 1.3L L4 | LU1617P | 🇺🇸 US | View on Amazon | |
| WELLS Fits: 1.3L L4 | 4P1083 | 🇺🇸 US | with Lucas Distributor | View on Amazon |
This table covers the breaker points in a points-type distributor.
4 Ignition Breaker Points parts for the 1967 Austin-Healey Sprite come from 4 brands — FAMOUS BRAND, FACET, STANDARD MOTOR PRODUCTS and 1 other brand.
The Economy section: 1 option from FAMOUS BRAND. FAMOUS BRAND ANA1004 is listed in this group.
Standard Replacement: 3 parts, from FACET, STANDARD MOTOR PRODUCTS and WELLS. A representative part number is FACET 14683MHDV.
This group includes FAMOUS BRAND ANA1004, FACET 14683MHDV and STANDARD MOTOR PRODUCTS LU1617P and the remaining parts above.
Buying Ignition Parts for a 1967 Austin-Healey Sprite
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Breaker Points and Condenser / Capacitor .
Frequently Asked Questions
How many ignition parts fit the 1967 Austin-Healey Sprite?
Our catalog currently lists 11 ignition parts for the 1967 Austin-Healey Sprite across 4 subcategories and 4 brands, covering both the 1.1L L4 and the 1.3L L4. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1967 Austin-Healey Sprite engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1967 Austin-Healey Sprite?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1967 Austin-Healey Sprite was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1967 Austin-Healey Sprite?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1967 Austin-Healey Sprite
Ignition Parts for Other Austin-Healey Sprite Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.