1964 Austin Mini Cooper Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 32 engine parts for the 1964 Austin Mini Cooper, across 14 part types, covering all 4 engine options (1.1L L4, 1.3L L4, 970cc L4 and 998cc L4). Every part shows its brand, manufacturer part number and fitment notes.

On the 1964 Austin Mini Cooper, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 14 parts of the 32 listed are Oil Filter (7 parts), Valve Cover Gasket (4 parts) and Crankshaft Seal (3 parts). The other 11 part types cover the remaining 18 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Fits: 998cc L4 BL1
🇺🇸 US
Standard
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 970cc L4, 998cc L4 CB488P
🇺🇸 US
P Series (Tri-Metal)Pair
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4, 998cc L4 54031300
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4 15016600
🇺🇸 US
Front39.68 x 59.08 x 9.5
Fitment notes — AJUSA 15016600
Front39.68 x 59.08 x 9.5Clockwise
View on
Amazon
AJUSA Fits: 1.3L L4, 998cc L4 15026900
🇺🇸 US
RearCounter Clockwise
Fitment notes — AJUSA 15026900
RearCounter Clockwise
Fits:
RearCounter ClockwiseEngine # A
or:
RearEngine Code 99H or Engine Code 9AGCounter Clockwise
View on
Amazon
AJUSA Fits: 998cc L4 15015900
🇺🇸 US
Fits Front38 x 58.9 x 8.3
Fitment notes — AJUSA 15015900
Fits:
Front38 x 58.9 x 8.3ClockwiseEngine # A
or:
FrontEngine Code 99H or Engine Code 9AG38 X 58.9 X 8.3/9.5Clockwise
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4 10012900
🇺🇸 US
73 Bore Diameter
View on
Amazon
AJUSA Fits: 998cc L4 10012800
🇺🇸 US
Fits 68 Bore DiameterEngine # Aor Engine Code 99H or Engine Code 9AG
Fitment notes — AJUSA 10012800
Fits:
68 Bore DiameterEngine # Aor Engine Code 99H or Engine Code 9AG68 Bore Diameter
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4 52000200
🇺🇸 US
View on
Amazon
AJUSA Fits: 998cc L4 52000100
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
MELLING Fits: 998cc L4 CSL633
🇺🇸 US
3/32 IN Wall Thickness
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4 50000200
🇺🇸 US
View on
Amazon
AJUSA Fits: 998cc L4 50062300
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4 13021700
🇺🇸 US
View on
Amazon
AJUSA Fits: 998cc L4 13005400
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon
BECK/ARNLEY Fits: 1.3L L4, 998cc L4 0370205
🇺🇸 US
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
PUROLATOR Fits: 1.3L L4 L14753
🇺🇸 US 🇨🇦 CA
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 1.3L L4 LF187
🇺🇸 US
View on
Amazon
MANN Fits: 1.3L L4 H8131X
🇺🇸 US
View on
Amazon
WIX Fits: 1.3L L4 51184
🇺🇸 US
View on
Amazon
Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 998cc L4 LF187
🇺🇸 US
View on
Amazon
MANN Fits: 970cc L4, 998cc L4 H8131X
🇺🇸 US
View on
Amazon
WIX Fits: 970cc L4, 998cc L4 51184
🇺🇸 US
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4, 998cc L4 59000100
🇺🇸 US
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Belt Pulley

Brand Part Number Markets Notes Buy
BECK/ARNLEY Fits: 1.3L L4, 970cc L4, 998cc L4 0513860
🇺🇸 US
Bearing Only
Fitment notes — BECK/ARNLEY 0513860
Bearing Only
15mm X 35mm X 11mm
View on
Amazon
BECK/ARNLEY Fits: 1.3L L4, 970cc L4, 998cc L4 0513954
🇺🇸 US
Bearing Only
Fitment notes — BECK/ARNLEY 0513954
Bearing Only
20mm X 47mm X 14mm
View on
Amazon

This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4, 998cc L4 11005900
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon
FEL-PRO Fits: 970cc L4, 998cc L4 VS21507
🇺🇸 US
View on
Amazon
MAHLE / CLEVITE Fits: 970cc L4, 998cc L4 VS30025
🇺🇸 US
Cork-Rubber
View on
Amazon
VICTOR REINZ Fits: 970cc L4, 998cc L4 151043701
🇺🇸 US
Set
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.3L L4, 998cc L4 12000100
🇺🇸 US
6 x 10 x 12
Fitment notes — AJUSA 12000100
6 x 10 x 12
Fits:
6 x 10 x 12Engine # Aor Engine Code 99H or Engine Code 9AG6 x 10 x 12
View on
Amazon
AJUSA Fits: 1.3L L4, 998cc L4 57000100
🇺🇸 US
Fits Engine # Aor Engine Code 99H or Engine Code 9AG
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1964 Austin Mini Cooper

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Valve Cover Gasket .

Frequently Asked Questions

How many engine parts fit the 1964 Austin Mini Cooper?

Our catalog currently lists 32 engine parts for the 1964 Austin Mini Cooper across 14 subcategories and 11 brands, covering all 4 engine options (1.1L L4, 1.3L L4, 970cc L4 and 998cc L4). Each part is matched to the engine(s) it fits.

Do engine parts differ between 1964 Austin Mini Cooper engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 1964 Austin Mini Cooper?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Austin Mini Cooper was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1964 Austin Mini Cooper?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1964 Austin Mini Cooper

Engine Parts for Other Austin Mini Cooper Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.