This page lists 10 engine parts for the 2016 Bentley Flying Spur, across 7 part types, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
On the 2016 Bentley Flying Spur, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Turbocharger Boost Sensor (3 parts), Valve Stem Seal (2 parts) and Camshaft Seal (1 part). The other 4 part types cover the remaining 4 parts.
The 2016 Bentley Flying Spur was sold with both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2016 Bentley Flying Spur engine parts are WJB / INMOTION PARTS (2 parts), WELLS (2 parts) and TIMKEN (1 part), plus 5 more brands.
Each part number listed for the 2016 Bentley Flying Spur opens a page with every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: 4.0L V8 Turbocharged | SL260342 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2016 Bentley Flying Spur — TIMKEN SL260342.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.0L V8 Turbocharged | WS99333 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
One part is listed for the 2016 Bentley Flying Spur — WJB / INMOTION PARTS WS99333.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: 4.0L V8 Turbocharged | WS710761 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2016 Bentley Flying Spur — WJB / INMOTION PARTS WS710761.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 4.0L V8 Turbocharged | PG9981EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
One part is listed for the 2016 Bentley Flying Spur — VARIOUS MFR PG9981EX.
Turbocharger Boost Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Fits: 4.0L V8 Turbocharged | TP0005 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 4.0L V8 Turbocharged | 5S11970 | 🇺🇸 US 🇨🇦 CA | Connector Quantity: 1 | View on Amazon |
| WELLS Fits: 4.0L V8 Turbocharged | 5S11678 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
3 Turbocharger Boost Sensor parts for the 2016 Bentley Flying Spur come from 2 brands — WELLS and NTK.
Part numbers include NTK TP0005, WELLS 5S11970 and WELLS 5S11678.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 4.0L V8 Turbocharged | 584560 | 🇺🇸 US 🇨🇦 CA | StudThread Size: M8X1,25x25 | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 584560.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.0L V8 Turbocharged | SS710741 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 4.0L V8 Turbocharged | 123130603 | 🇺🇸 US 🇨🇦 CA | SetContains 20 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Valve Stem Seal parts are listed for the 2016 Bentley Flying Spur, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO SS710741 and VICTOR REINZ 123130603.
Buying Engine Parts for a 2016 Bentley Flying Spur
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Turbocharger Boost Sensor and Valve Stem Seal .
Frequently Asked Questions
How many engine parts fit the 2016 Bentley Flying Spur?
Our catalog currently lists 10 engine parts for the 2016 Bentley Flying Spur across 7 subcategories and 8 brands, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2016 Bentley Flying Spur engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2016 Bentley Flying Spur?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Bentley Flying Spur was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2016 Bentley Flying Spur?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2016 Bentley Flying Spur
Engine Parts for Other Bentley Flying Spur Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.