22 Engine parts are listed for the 2018 Bentley Flying Spur, in 7 part types, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2018 Bentley Flying Spur covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (9 parts), Crankshaft Repair Sleeve (4 parts) and Turbocharger Boost Sensor (3 parts). The other 4 part types cover the remaining 6 parts.
The 2018 Bentley Flying Spur was sold with both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. 6 parts fit every engine; the other 16 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2018 Bentley Flying Spur engine parts are WJB / INMOTION PARTS (6 parts), BCA (3 parts) and NATIONAL (3 parts), plus 8 more brands.
2 parts on this 2018 Bentley Flying Spur page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including BCA NS224200 (Crankshaft Seal) and NATIONAL 224200 (Crankshaft Seal). Click any part number to see every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Fits: all 2018 Flying Spur engines | SL260342 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 6.0L W12 Turbocharged | WS710857 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts are listed for the 2018 Bentley Flying Spur, from TIMKEN and WJB / INMOTION PARTS. 1 part fits every engine; the other 1 is engine-specific.
This group includes TIMKEN SL260342 and WJB / INMOTION PARTS WS710857.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 6.0L W12 Turbocharged | NS99166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 6.0L W12 Turbocharged | 99166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2018 Flying Spur engines | WS99333 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.0L W12 Turbocharged | WS99166 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
4 Crankshaft Repair Sleeve parts are listed for the 2018 Bentley Flying Spur, from WJB / INMOTION PARTS, BCA and NATIONAL. 1 part fits every engine; the other 3 are engine-specific.
This group includes BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99333 and the remaining parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Popular Fits: 6.0L W12 Turbocharged | NS224200 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Popular Fits: 6.0L W12 Turbocharged | 224200 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ACDELCO Fits: 6.0L W12 Turbocharged | 224200 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| BCA Fits: 6.0L W12 Turbocharged | NS716102 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| NATIONAL Fits: 6.0L W12 Turbocharged | 716102 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SCHAEFFLER Fits: 6.0L W12 Turbocharged | SS2719 | 🇺🇸 US 🇨🇦 CA | Front2.17" O.D. X 0.28" Width | View on Amazon |
| WJB / INMOTION PARTS Fits: 4.0L V8 Turbocharged | WS710761 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.0L W12 Turbocharged | WS716102 | 🇺🇸 US 🇨🇦 CA | Width: 0.51200000000000001 In | View on Amazon |
| WJB / INMOTION PARTS Fits: 6.0L W12 Turbocharged | WS224200 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Crankshaft Seal parts are listed for the 2018 Bentley Flying Spur, from WJB / INMOTION PARTS, BCA, NATIONAL and 2 other brands. BCA NS224200 carries the "Popular" badge.
This group includes BCA NS224200 and NATIONAL 224200 and the remaining parts above.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 4.0L V8 Turbocharged | PG9981EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
| VARIOUS MFR Fits: 6.0L W12 Turbocharged | PG5890 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
VARIOUS MFR supplies both parts for the 2018 Bentley Flying Spur.
This group includes VARIOUS MFR PG9981EX and VARIOUS MFR PG5890.
Turbocharger Boost Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NTK Fits: all 2018 Flying Spur engines | TP0005 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: all 2018 Flying Spur engines | 5S11970 | 🇺🇸 US 🇨🇦 CA | Connector Quantity: 1 | View on Amazon |
| WELLS Fits: all 2018 Flying Spur engines | 5S11678 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
3 Turbocharger Boost Sensor parts for the 2018 Bentley Flying Spur come from 2 brands — WELLS and NTK. Every part fits both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged.
Part numbers include NTK TP0005, WELLS 5S11970 and WELLS 5S11678.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2018 Flying Spur engines | 584560 | 🇺🇸 US 🇨🇦 CA | StudThread Size: M8X1,25x25 | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 584560.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.0L V8 Turbocharged | SS710741 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2018 Bentley Flying Spur — FEL-PRO SS710741.
Buying Engine Parts for a 2018 Bentley Flying Spur
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Crankshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 2018 Bentley Flying Spur?
Our catalog currently lists 22 engine parts for the 2018 Bentley Flying Spur across 7 subcategories and 11 brands, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2018 Bentley Flying Spur engines?
Some do. 6 parts fit every engine; the other 16 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2018 Bentley Flying Spur?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Bentley Flying Spur was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Bentley Flying Spur?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Bentley Flying Spur
Engine Parts for Other Bentley Flying Spur Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.