This page lists 18 wheel parts for the 2018 Bentley Flying Spur, across 2 part types, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
On the 2018 Bentley Flying Spur, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 18 listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (14 parts) and Tire Pressure Monitoring System (TPMS) Sensor (4 parts).
The 2018 Bentley Flying Spur was sold with both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
5 brands supply wheel parts for the 2018 Bentley Flying Spur, led by BH SENS (8 parts), STANDARD MOTOR PRODUCTS (6 parts) and SCHRADER (2 parts), plus 2 more brands. Quality grades include Valve Stem Assembly, OE Replacement and Hardware Only.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Bentley Flying Spur. 3 parts have it, including STANDARD MOTOR PRODUCTS TPM4012SK (Tire Pressure Monitoring System (TPMS) Stem / Service Kit) and BH SENS RDV021 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit). Each part number opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Fits: 4.0L V8 Turbocharged | TPM3 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensorwith 433 MHz Sensor | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Fits: 4.0L V8 Turbocharged | RDE048V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| SCHRADER Fits: 4.0L V8 Turbocharged | 29138 | 🇺🇸 US 🇨🇦 CA | ProgrammedIncludes Mounting Hardware | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V8 Turbocharged | TPM3 | 🇺🇸 US 🇨🇦 CA | Core Material: Nickel Coated CoreProgrammed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2018 Bentley Flying Spur, from ULTRA-POWER, BH SENS, SCHRADER and 1 other brand.
In the Aftermarket / Multi-Application (Programmed) grade, ULTRA-POWER supplies 1 part: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is ULTRA-POWER TPM3.
The OE Replacement (Programmed) section lists 3 options from BH SENS, SCHRADER and STANDARD MOTOR PRODUCTS — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE048V21 is listed in this group.
This group includes ULTRA-POWER TPM3, BH SENS RDE048V21 and SCHRADER 29138 and the remaining parts above.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 4.0L V8 Turbocharged | TPM4012SK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Service KitSold Individually | View on Amazon |
| SCHRADER Fits: 4.0L V8 Turbocharged | 20023 | 🇺🇸 US 🇨🇦 CA | Clamp-In componentsPack of 50 | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular Fits: 4.0L V8 Turbocharged | RDV021 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 43mm | View on Amazon |
| STANDARD MOTOR PRODUCTS Popular Fits: 4.0L V8 Turbocharged | TPM2011VK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor ValveSold Individually | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV022 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 48mm | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV026 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalBlack 43mm | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV023 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 49mm | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV027 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalTitanium 43mm | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV024 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 51mm | View on Amazon |
| BH SENS Fits: 4.0L V8 Turbocharged | RDV025 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 56mm | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V8 Turbocharged | TPM2012VK | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V8 Turbocharged | TPM2012VBK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.0L V8 Turbocharged | TPM2012VCK | 🇺🇸 US 🇨🇦 CA | Qwik-Sensor Valve | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ALLIGATOR Fits: 4.0L V8 Turbocharged | 591305 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE Valves with Torx Screw | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
14 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2018 Bentley Flying Spur come from 4 brands — BH SENS, STANDARD MOTOR PRODUCTS, SCHRADER and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS TPM4012SK.
The Hardware Only section lists 2 options from STANDARD MOTOR PRODUCTS and SCHRADER — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TPM4012SK is listed in this group.
In the Valve Stem Assembly grade, BH SENS and STANDARD MOTOR PRODUCTS supply 11 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is BH SENS RDV021.
1 further part sits outside the graded sections, with the same engine-level match.
Buying Wheel Parts for a 2018 Bentley Flying Spur
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Match the engine first. Every wheel part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2018 Bentley Flying Spur?
Our catalog currently lists 18 wheel parts for the 2018 Bentley Flying Spur across 2 subcategories and 5 brands, covering both the 4.0L V8 Turbocharged and the 6.0L W12 Turbocharged. Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2018 Bentley Flying Spur engines?
Yes. Every wheel part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of wheel problems on a 2018 Bentley Flying Spur?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Bentley Flying Spur was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Bentley Flying Spur?
First match the engine — each row shows which engine(s) the part fits. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Bentley Flying Spur
Wheel Parts for Other Bentley Flying Spur Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.