14 Automatic transmission parts are listed for the 2020 BMW 220I, in 7 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The automatic transmission on the 2020 BMW 220I covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. The largest groups are Transmission Fluid Additive (6 parts), Transmission Mount (3 parts) and Filter (1 part). The other 4 part types cover the remaining 4 parts.
Every part on this page is matched to the 2.0L L4 Turbocharged — the only engine offered in the 2020 BMW 220I.
The most listed brands for 2020 BMW 220I automatic transmission parts are LUBEGARD (6 parts), ELRING (4 parts) and ATP (1 part), plus 3 more brands.
2 parts on this 2020 BMW 220I page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including LUBEGARD 19610 (Transmission Fluid Additive) and LUBEGARD 60902 (Transmission Fluid Additive). Click any part number to see every vehicle that part fits.
Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP | B205 | 🇲🇽 MX | Premium Replacement | View on Amazon |
This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
This group shows a single part: ATP B205.
Fluid Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 224210 | 🇲🇽 MX | with Seal | View on Amazon |
This table covers the pans that hold automatic-transmission fluid.
One part is listed for the 2020 BMW 220I — ELRING 224210.
Fluid Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 186400 | 🇲🇽 MX | with Trans.: 8-Speed Automatic Transmission | View on Amazon |
This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 186400.
Input Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 096490 | 🇲🇽 MX | Height [MM]: 7Inner Diameter [MM]: 53 | View on Amazon |
This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2020 BMW 220I — ELRING 096490.
O-Rings & Seals
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 821470 | 🇲🇽 MX | without Oil Sump Gasket,without Bolts/Screws,without Filter | View on Amazon |
This table covers the O-rings and seals at this joint.
One part is listed for the 2020 BMW 220I — ELRING 821470.
Transmission Fluid Additive
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Popular | 19610 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD Popular | 60902 | 🇲🇽 MX | Automatic Transmission Fluid Protectant10 oz | View on Amazon |
| LUBEGARD | 19689 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD | 63010 | 🇲🇽 MX | Platinum Universal ATF Protectant10 oz | View on Amazon |
| LUBEGARD | 63016 | 🇲🇽 MX | Platinum Universal ATF Protectant15 oz | View on Amazon |
| LUBEGARD | 63032 | 🇲🇽 MX | Platinum Universal ATF Protectant32 oz | View on Amazon |
This table covers the conditioners and additives used with this transmission fluid.
6 Transmission Fluid Additive parts for the 2020 BMW 220I come from LUBEGARD. The "Popular" part is LUBEGARD 19610.
Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, among others listed above.
Transmission Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR | 9916 | 🇲🇽 MX | Fits Right | View on Amazon |
| DEA / MARMON RIDE CONTROL | A4083 | 🇲🇽 MX | View on Amazon | |
| WESTAR | EM7279 | 🇲🇽 MX | View on Amazon |
This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
3 Transmission Mount parts are listed for the 2020 BMW 220I, from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR.
Listed part numbers: ANCHOR 9916, DEA / MARMON RIDE CONTROL A4083 and WESTAR EM7279.
Buying Automatic Transmission Parts for a 2020 BMW 220I
On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Transmission Fluid Additive and Transmission Mount .
Frequently Asked Questions
How many automatic transmission parts fit the 2020 BMW 220I?
Our catalog currently lists 14 automatic transmission parts for the 2020 BMW 220I across 7 subcategories and 6 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of automatic transmission problems on a 2020 BMW 220I?
Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 BMW 220I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 BMW 220I?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 BMW 220I
Automatic Transmission Parts for Other BMW 220I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.