2020 BMW 530I Engine Parts

This table covers the Balance Shaft covers. Read more

This group shows a single part: DORMAN 926054.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54263900.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2020 BMW 530I, from MAHLE / CLEVITE, VICTOR REINZ and AJUSA. MAHLE / CLEVITE 68102 carries the "Popular" badge.

This group includes MAHLE / CLEVITE 68102, VICTOR REINZ 813700200 and AJUSA 15075200 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 2020 BMW 530I come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: AJUSA 81065000, MAHLE / CLEVITE GS33999 and VICTOR REINZ 141226102.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 2020 BMW 530I come from 4 brands — VICTOR REINZ, AJUSA, MAHLE / CLEVITE and 1 other brand. The "Popular" part is VICTOR REINZ 611016610.

Listed part numbers: VICTOR REINZ 611016610, VICTOR REINZ 611016600 and AJUSA 10220600, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52503900.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2020 BMW 530I come from TECHPRO.

This group includes TECHPRO BM1228184 and TECHPRO BM1228188.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50453600.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2020 BMW 530I — REIN HWB0074.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

VAICO supplies both parts for the 2020 BMW 530I.

Listed part numbers: VAICO V204510 and VAICO V204803.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 2020 BMW 530I come from 3 brands — ELRING, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: ELRING 076500, MAHLE / CLEVITE MS20642 and VICTOR REINZ 711737500.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

11 Motor Mount parts are listed for the 2020 BMW 530I, from ANCHOR, ÜRO PARTS, DEA / MARMON RIDE CONTROL and 1 other brand. ÜRO PARTS 22116860488 carries the "Popular" badge.

In the Economy grade, ÜRO PARTS supplies 3 parts: the catalog's value-priced group. A representative part number is ÜRO PARTS 22116860488.

The Standard Replacement section lists 8 options from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER — built to original-equipment specification. ANCHOR 10067 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2020 BMW 530I — ANCHOR 300960.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts are listed for the 2020 BMW 530I, from LIQUI MOLY, PENTOSIN and VALVOLINE. LIQUI MOLY 22044 carries the "Popular" badge.

This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

7 Oil Cooler parts are listed for the 2020 BMW 530I, from MAHLE / CLEVITE, VEMO, DORMAN and 3 other brands. MAHLE / CLEVITE CLC362000S carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE CLC362000S, VEMO V20600092 and DORMAN 918910, plus the other parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 2020 BMW 530I come from AJUSA.

Part numbers include AJUSA 77005900 and AJUSA 77006000.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2020 BMW 530I, from AGS, DORMAN and REIN.

This group includes AGS ODP00010, DORMAN 090088 and REIN HWU1041.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2020 BMW 530I come from 2 brands — AJUSA and VICTOR REINZ.

Part numbers include AJUSA 21010400 and VICTOR REINZ 417005800.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2020 BMW 530I, from MOTORAD, REIN and VAICO.

Listed part numbers: MOTORAD MO214, REIN CPL0041 and VAICO V204688.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

16 Oil Filter parts are listed for the 2020 BMW 530I, from WIX, PRO-TEC, CHAMP / LUBER-FINER and 12 other brands. PRO-TEC PXL10358 carries the "Popular" badge.

Economy: 5 parts, from PRO-TEC, CHAMP / LUBER-FINER, FVP and 2 other brands. A representative part number is PRO-TEC PXL10358.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C354A.

The Standard Replacement section: 9 options from MAHLE / CLEVITE, MANN, WIX and 6 other brands. MAHLE / CLEVITE OX8132D is listed in this group.

This table covers the Oil Filter covers. Read more

5 Oil Filter Cover parts for the 2020 BMW 530I come from 5 brands — DORMAN, MOTORAD, SKP and 2 other brands. The "Popular" part is DORMAN 921115.

Part numbers include DORMAN 921115, MOTORAD MO310 and SKP SK921115, among others listed above.

This table covers the Oil Filter housings. Read more

2 Oil Filter Housing parts for the 2020 BMW 530I come from ÜRO PARTS.

This group includes ÜRO PARTS 11428580414 and ÜRO PARTS 11428580414PRM.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

4 Oil Level Sensor parts are listed for the 2020 BMW 530I, from FACET, HELLA, STANDARD MOTOR PRODUCTS and 1 other brand.

This group includes FACET 70240, HELLA 013680141 and STANDARD MOTOR PRODUCTS FLS325 and the remaining parts above.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2020 BMW 530I — AJUSA 16078650.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 2020 BMW 530I come from 2 brands — REIN and VAICO.

This group includes REIN ESK0244, REIN ESK0235 and VAICO V204615.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 BMW 530I — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2020 BMW 530I — VAICO V204561.

This table covers the chains that drive the oil pump. Read more

5 Oil Pump Chain parts for the 2020 BMW 530I come from 3 brands — S.A. GEAR, VAICO and CLOYES. The "Popular" part is VAICO V203921.

The Kit section lists 1 option from VAICO — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. VAICO V203921 is listed in this group.

Standard Replacement: 3 parts, from S.A. GEAR. A representative part number is S.A. GEAR C1213.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes VAICO V203921, S.A. GEAR C1213 and S.A. GEAR 76437P and the remaining parts above.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: CLOYES S1172.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 2020 BMW 530I — INA VF0241.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2020 BMW 530I come from 2 brands — CLOYES and VAICO.

This group includes CLOYES C528 and VAICO V103405.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2020 BMW 530I, from VAICO, S.A. GEAR and CLOYES. S.A. GEAR 76399 carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76399.

The Standard Replacement section: 7 options from VAICO and CLOYES. CLOYES 90528SX is listed in this group.

Listed part numbers: S.A. GEAR 76399, S.A. GEAR 76400 and CLOYES 90528SX, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

3 Timing Chain Guide / Damper parts for the 2020 BMW 530I come from CLOYES.

This group includes CLOYES 96180, CLOYES 96181 and CLOYES 96182.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 BMW 530I — CLOYES 96179.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 BMW 530I — AJUSA 77090600.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts are listed for the 2020 BMW 530I, from GPD and NISSENS.

Listed part numbers: GPD 2511701, GPD 2511634 and NISSENS 93344.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: WELLS 5S14741.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

REIN supplies both parts for the 2020 BMW 530I.

Listed part numbers: REIN CHT0924 and REIN CHT0923.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Turbocharger Gasket parts for the 2020 BMW 530I come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.

This group includes AJUSA 01335100, AJUSA JTC11993 and ELRING 087320 and the remaining parts above.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Oil Line parts are listed for the 2020 BMW 530I, from REIN, BRUTE POWER, AJUSA and 1 other brand. BRUTE POWER LIN9072 carries the "Popular" badge.

Part numbers include BRUTE POWER LIN9072, AJUSA OP10925 and REIN TRP0377, among others listed above.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Turbocharger Oil Line Gasket / O-Ring parts are listed for the 2020 BMW 530I, from AJUSA and ELRING.

Listed part numbers: AJUSA 16006101 and ELRING 728760.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Turbocharger Wastegate Solenoid / Actuator parts are listed for the 2020 BMW 530I, from DORMAN and SKP.

This group includes DORMAN 667845 and SKP SK6T50672.

This table covers the Valve covers. Read more

5 Valve Cover parts for the 2020 BMW 530I come from 3 brands — SKP, DORMAN and ELRING. The "Popular" part is DORMAN 264772.

Part numbers include DORMAN 264772, ELRING B37590 and SKP SK8631745, among others listed above.

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first. Read more

This group shows a single part: ÜRO PARTS 11129454322.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2020 BMW 530I, from VICTOR REINZ, BECK/ARNLEY, AJUSA and 2 other brands. BECK/ARNLEY 0362095 carries the "Popular" badge.

Listed part numbers: BECK/ARNLEY 0362095, AJUSA 11140100 and APEX AVC984, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2020 BMW 530I — AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts are listed for the 2020 BMW 530I, from VICTOR REINZ, MAHLE / CLEVITE, AJUSA and 1 other brand. AJUSA 57067700 carries the "Popular" badge.

Listed part numbers: AJUSA 57067700, VICTOR REINZ 123686603 and FEL-PRO SS73259, plus the other parts above.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2020 BMW 530I — ÜRO PARTS 11378652738.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2020 BMW 530I, from VAICO, GATES, WALKER PRODUCTS and 2 other brands. GATES VVS229 carries the "Popular" badge.

Economy: 5 parts, from GATES, WALKER PRODUCTS, VAICO and 2 other brands. A representative part number is GATES VVS229.

The Standard Replacement section: 1 option from VAICO. VAICO V203797 is listed in this group.

Listed part numbers: GATES VVS229, WALKER PRODUCTS 5901282 and VAICO V204822, plus the other parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

4 Variable Valve Timing (VVT) Sprocket parts are listed for the 2020 BMW 530I, from INA, STANDARD MOTOR PRODUCTS and VAICO.

Listed part numbers: INA VV1122, INA VV1123 and STANDARD MOTOR PRODUCTS VVT768, plus the other parts above.