2024 BMW 530I Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54303200.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2024 BMW 530I.

Listed part numbers: AJUSA 15075200 and AJUSA 15107900.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81065000.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2024 BMW 530I come from AJUSA.

Listed part numbers: AJUSA 10249800 and AJUSA 10249810.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52679500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50600500.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2024 BMW 530I — REIN HWB0074.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2024 BMW 530I come from AJUSA.

Part numbers include AJUSA 13355600 and AJUSA 77086200.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

5 Oil parts are listed for the 2024 BMW 530I, from LIQUI MOLY and VALVOLINE. LIQUI MOLY 22046 carries the "Popular" badge.

This group includes LIQUI MOLY 22046, LIQUI MOLY 22044 and LIQUI MOLY 22048 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2024 BMW 530I, from MAHLE / CLEVITE and NISSENS.

This group includes MAHLE / CLEVITE CLC362000S and NISSENS 91395.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 77031200.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts are listed for the 2024 BMW 530I, from DORMAN and REIN.

Listed part numbers: DORMAN 090088 and REIN HWU1041.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 21010400.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2024 BMW 530I — MOTORAD MO214.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts are listed for the 2024 BMW 530I, from WIX, PRO-TEC, CHAMP / LUBER-FINER and 8 other brands. PRO-TEC PXL10358 carries the "Popular" badge.

In the Economy grade, PRO-TEC, CHAMP / LUBER-FINER and FVP supply 3 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10358.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C354A.

The Standard Replacement section lists 7 options from MAHLE / CLEVITE, MANN, BECK/ARNLEY and 4 other brands — built to original-equipment specification. MAHLE / CLEVITE OX8132D is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33885.

This table covers the Oil Filter housings. Read more

This group shows a single part: DORMAN 918943.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2024 BMW 530I come from REIN.

This group includes REIN ESK0244 and REIN ESK0235.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts for the 2024 BMW 530I come from AJUSA.

Part numbers include AJUSA 01335100 and AJUSA JTC12525.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2024 BMW 530I — AJUSA OP11477.

This table covers the Valve covers. Read more

This group shows a single part: SKP SK743462.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2024 BMW 530I — AJUSA 56102800.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2024 BMW 530I — AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies the 3 Valve Stem Seal parts for the 2024 BMW 530I.

Part numbers include AJUSA 57067700, AJUSA 12027900 and AJUSA 12028200.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 BMW 530I, from VNE, ÜRO PARTS and WELLS.

This group includes ÜRO PARTS 11368696446, VNE 4022005 and VNE 4022006 and the remaining parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.