This page lists 23 engine parts for the 2021 BMW 120I, across 17 part types, covering the 2.0L L4 Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2021 BMW 120I, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Valve Stem Seal (3 parts), Crankshaft Seal (2 parts) and Cylinder Head Gasket (2 parts). The other 14 part types cover the remaining 16 parts.
Every part on this page is matched to the 2.0L L4 Turbocharged — the only engine offered in the 2021 BMW 120I.
The most listed brands for 2021 BMW 120I engine parts are AJUSA (17 parts), DORMAN (3 parts) and VARIOUS MFR (1 part), plus 2 more brands.
Each part number listed for the 2021 BMW 120I opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54297900 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 54297900.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15075200 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA | 15107900 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 2021 BMW 120I.
This group includes AJUSA 15075200 and AJUSA 15107900.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81065000 | 🇲🇽 MX | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
This group shows a single part: AJUSA 81065000.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 10248100 | 🇲🇽 MX | Multi Layered SteelThickness: 0.7 MM | View on Amazon |
| AJUSA | 10248110 | 🇲🇽 MX | Multi Layered SteelThickness: 1 MM | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Cylinder Head Gasket parts for the 2021 BMW 120I come from AJUSA.
This group includes AJUSA 10248100 and AJUSA 10248110.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52634600 | 🇲🇽 MX | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 52634600.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 50563800 | 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: AJUSA 50563800.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 24039500 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 24039500.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 090088 | 🇲🇽 MX | MetalStandard | View on Amazon |
This table covers the drain plugs in the oil pan.
One part is listed for the 2021 BMW 120I — DORMAN 090088.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 21010400 | 🇲🇽 MX | with Original Equipment (OE) # 7119963132 | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 21010400.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR | PO99521EX | 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
One part is listed for the 2021 BMW 120I — VARIOUS MFR PO99521EX.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | JTC12488 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING | 094830 | 🇲🇽 MX | Charge Air Hose | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Turbocharger Gasket parts for the 2021 BMW 120I come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA JTC12488 and ELRING 094830.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | OP11220 | 🇲🇽 MX | Supply tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
One part is listed for the 2021 BMW 120I — AJUSA OP11220.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 667845 | 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2021 BMW 120I — DORMAN 667845.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 264772 | 🇲🇽 MX | View on Amazon | |
| SKP | SK743462 | 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts for the 2021 BMW 120I come from 2 brands — DORMAN and SKP.
This group includes DORMAN 264772 and SKP SK743462.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 56094000 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2021 BMW 120I — AJUSA 56094000.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 85022300 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2021 BMW 120I — AJUSA 85022300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 57067700 | 🇲🇽 MX | View on Amazon | |
| AJUSA | 12027900 | 🇲🇽 MX | Intake4.5 x 9.8 x 21.5 | View on Amazon |
| AJUSA | 12028200 | 🇲🇽 MX | Exhaust5.2 x 9.8 x 21.15 | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies the 3 Valve Stem Seal parts for the 2021 BMW 120I.
Part numbers include AJUSA 57067700, AJUSA 12027900 and AJUSA 12028200.
Buying Engine Parts for a 2021 BMW 120I
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Stem Seal and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2021 BMW 120I?
Our catalog currently lists 23 engine parts for the 2021 BMW 120I across 17 subcategories and 5 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2021 BMW 120I?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 BMW 120I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2021 BMW 120I?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2021 BMW 120I
Engine Parts for Other BMW 120I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.