2021 BMW 228I Engine Parts

This table covers the Balance Shaft covers. Read more

One part is listed for the 2021 BMW 228I — DORMAN 926054.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2021 BMW 228I, from ELRING and AJUSA.

Listed part numbers: AJUSA 54297900, ELRING 794660 and ELRING B80860.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2021 BMW 228I come from 3 brands — ELRING, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is ELRING 575970.

This group includes ELRING 575970, ELRING 586550 and MAHLE / CLEVITE 68102 and the remaining parts above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2021 BMW 228I — ELRING B45970.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2021 BMW 228I, from AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 81065000, ELRING 577230 and VICTOR REINZ 141226102.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2021 BMW 228I, from ELRING, MAHLE / CLEVITE and VICTOR REINZ. ELRING 796280 carries the "Popular" badge.

Part numbers include ELRING 796280, ELRING 597170 and MAHLE / CLEVITE 55535, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 BMW 228I — AJUSA 52634600.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 BMW 228I — AJUSA 50563800.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: REIN HWB0074.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: MARELLI PHP1013.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: MARELLI CAB501.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2021 BMW 228I, from ELRING, MAHLE / CLEVITE, AJUSA and 1 other brand. MAHLE / CLEVITE MS20554 carries the "Popular" badge.

This group includes MAHLE / CLEVITE MS20554, AJUSA 24039500 and ELRING 572700 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts for the 2021 BMW 228I come from 7 brands — VAICO, ÜRO PARTS, SKP and 4 other brands. The "Popular" part is ÜRO PARTS 22118835566.

The Economy section lists 6 options from VAICO, ÜRO PARTS and SKP — the catalog's value-priced group. ÜRO PARTS 22118835566 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 10139.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300491.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts for the 2021 BMW 228I come from 3 brands — LIQUI MOLY, PENTOSIN and VALVOLINE. The "Popular" part is LIQUI MOLY 22044.

Listed part numbers: LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048, plus the other parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts are listed for the 2021 BMW 228I, from AJUSA and ELRING.

Listed part numbers: AJUSA 77010600 and ELRING 091760.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2021 BMW 228I come from 3 brands — ELRING, DORMAN and REIN.

This group includes DORMAN 090088, ELRING 455740 and ELRING 427210 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2021 BMW 228I, from AJUSA, ELRING and VICTOR REINZ.

Part numbers include AJUSA 21010400, ELRING 110507 and VICTOR REINZ 417005800.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2021 BMW 228I come from 2 brands — MOTORAD and VAICO.

This group includes MOTORAD MO214 and VAICO V204688.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

9 Oil Filter parts for the 2021 BMW 228I come from 8 brands — MAHLE / CLEVITE, CHAMP / LUBER-FINER, ULTRA-POWER and 5 other brands. The "Popular" part is MAHLE / CLEVITE OX8132D.

The Economy section: 2 options from CHAMP / LUBER-FINER and ULTRA-POWER. CHAMP / LUBER-FINER P1081 is listed in this group.

Standard Replacement: 7 parts, from MAHLE / CLEVITE, WIX, FEL-PRO and 3 other brands. A representative part number is MAHLE / CLEVITE OX8132D.

Listed part numbers: MAHLE / CLEVITE OX8132D, CHAMP / LUBER-FINER P1081 and ULTRA-POWER WL10518, plus the other parts above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2021 BMW 228I — MAHLE / CLEVITE G33866.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts are listed for the 2021 BMW 228I, from MOTORAD and VAICO.

This group includes MOTORAD MO392 and VAICO V204799.

This table covers the Oil Filter housings. Read more

One part is listed for the 2021 BMW 228I — ÜRO PARTS 11428649177PRM.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 351210.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: VAICO V204981.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts are listed for the 2021 BMW 228I, from CLOYES and VAICO.

Listed part numbers: CLOYES C529 and VAICO V203921.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2021 BMW 228I — CLOYES S1172.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: INA VF0241.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2021 BMW 228I — CLOYES C528.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2021 BMW 228I come from 2 brands — CLOYES and VAICO.

This group includes CLOYES 90528SX, CLOYES 90528S and VAICO V2010026BEK and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

CLOYES supplies the 3 Timing Chain Guide / Damper parts for the 2021 BMW 228I.

Part numbers include CLOYES 96180, CLOYES 96181 and CLOYES 96182.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: CLOYES 96179.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts are listed for the 2021 BMW 228I, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. ANCHOR 10122 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKMET702.

The Standard Replacement section: 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 10122 is listed in this group.

This group includes ANCHOR 10122, SKP SKMET702 and DEA / MARMON RIDE CONTROL A70061 and the remaining parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2021 BMW 228I — WELLS 5S15111.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Coolant Line parts for the 2021 BMW 228I come from 3 brands — REIN, SUNSONG and DORMAN. The "Popular" part is DORMAN 667552.

This group includes DORMAN 667552, REIN CHT0923 and REIN CHT0937 and the remaining parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Turbocharger Gasket parts are listed for the 2021 BMW 228I, from ELRING, AJUSA and MAHLE / CLEVITE. AJUSA 01335100 carries the "Popular" badge.

Listed part numbers: AJUSA 01335100, ELRING 094830 and ELRING 087320, plus the other parts above.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Oil Line parts for the 2021 BMW 228I come from 3 brands — REIN, SUNSONG and ÜRO PARTS. The "Popular" part is REIN TFP0376.

Part numbers include REIN TFP0376, REIN TRP0377 and SUNSONG 5801717, among others listed above.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: ELRING 876070.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Turbocharger Wastegate Solenoid / Actuator parts for the 2021 BMW 228I come from 2 brands — DORMAN and SKP.

Listed part numbers: DORMAN 667845 and SKP SK6T50672.

This table covers the Valve covers. Read more

3 Valve Cover parts are listed for the 2021 BMW 228I, from ELRING and SKP.

Listed part numbers: ELRING B09610, ELRING B37590 and SKP SK743462.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2021 BMW 228I come from 4 brands — ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. The "Popular" part is ELRING 593300.

Listed part numbers: ELRING 593300, AJUSA 56094000 and ELRING 083720, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts for the 2021 BMW 228I come from 5 brands — ELRING, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. The "Popular" part is ELRING 308970.

Listed part numbers: ELRING 308970, ELRING 308630 and AJUSA 57067700, plus the other parts above.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: ÜRO PARTS 11378652738.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

4 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2021 BMW 228I come from 3 brands — VAICO, ÜRO PARTS and WELLS.

Part numbers include ÜRO PARTS 11367614288, VAICO V204822 and VAICO V204625, among others listed above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2021 BMW 228I — AJUSA 01907000.