2022 BMW 228I Engine Parts

This table covers the Balance Shaft covers. Read more

This group shows a single part: DORMAN 926054.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2022 BMW 228I come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 54297900, ELRING 794660 and ELRING B80860.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 2022 BMW 228I, from ELRING, VICTOR REINZ and MAHLE / CLEVITE. ELRING 575970 carries the "Popular" badge.

This group includes ELRING 575970, ELRING 586550 and MAHLE / CLEVITE 68102 and the remaining parts above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING B45970.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 2022 BMW 228I come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Part numbers include AJUSA 81065000, ELRING 577230 and VICTOR REINZ 141226102.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2022 BMW 228I come from 3 brands — ELRING, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is ELRING 796280.

This group includes ELRING 796280, ELRING 597170 and MAHLE / CLEVITE 55535 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52634600.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50563800.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2022 BMW 228I — REIN HWB0074.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2022 BMW 228I — MARELLI PHP1013.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2022 BMW 228I — MARELLI CAB501.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2022 BMW 228I come from 4 brands — ELRING, MAHLE / CLEVITE, AJUSA and 1 other brand. The "Popular" part is MAHLE / CLEVITE MS20554.

Listed part numbers: MAHLE / CLEVITE MS20554, AJUSA 24039500 and ELRING 572700, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts are listed for the 2022 BMW 228I, from VAICO, ÜRO PARTS, SKP and 4 other brands. ÜRO PARTS 22118835566 carries the "Popular" badge.

In the Economy grade, VAICO, ÜRO PARTS and SKP supply 6 parts: the catalog's value-priced group. A representative part number is ÜRO PARTS 22118835566.

The Standard Replacement section lists 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand — built to original-equipment specification. ANCHOR 10139 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2022 BMW 228I — ANCHOR 300491.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts are listed for the 2022 BMW 228I, from LIQUI MOLY, PENTOSIN and VALVOLINE. LIQUI MOLY 22044 carries the "Popular" badge.

This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048 and the remaining parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 2022 BMW 228I come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 77010600 and ELRING 091760.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2022 BMW 228I, from ELRING, DORMAN and REIN.

Listed part numbers: DORMAN 090088, ELRING 455740 and ELRING 427210, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2022 BMW 228I come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 21010400 and ELRING 110507.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2022 BMW 228I — MOTORAD MO214.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 2022 BMW 228I, from CHAMP / LUBER-FINER, ULTRA-POWER, MANN and 5 other brands. MANN HU6012ZKIT carries the "Popular" badge.

Economy: 2 parts, from CHAMP / LUBER-FINER and ULTRA-POWER. A representative part number is CHAMP / LUBER-FINER P1081.

The Standard Replacement section: 6 options from MANN, WIX, FEL-PRO and 3 other brands. MANN HU6012ZKIT is listed in this group.

Part numbers include MANN HU6012ZKIT, CHAMP / LUBER-FINER P1081 and ULTRA-POWER WL10518, among others listed above.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE G33866.

This table covers the Oil Filter covers. Read more

This group shows a single part: MOTORAD MO392.

This table covers the Oil Filter housings. Read more

This group shows a single part: ÜRO PARTS 11428649177PRM.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 BMW 228I — ELRING 351210.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 BMW 228I — VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: CLOYES C529.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: CLOYES S1172.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES C528.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

CLOYES supplies both parts for the 2022 BMW 228I.

Part numbers include CLOYES 90528SX and CLOYES 90528S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

3 Timing Chain Guide / Damper parts for the 2022 BMW 228I come from CLOYES.

Listed part numbers: CLOYES 96180, CLOYES 96181 and CLOYES 96182.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2022 BMW 228I — CLOYES 96179.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts for the 2022 BMW 228I come from 4 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand.

The Economy section: 1 option from SKP. SKP SKMET702 is listed in this group.

Standard Replacement: 3 parts, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. A representative part number is ANCHOR 10122.

This group includes SKP SKMET702, ANCHOR 10122 and DEA / MARMON RIDE CONTROL A70061 and the remaining parts above.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Coolant Line parts are listed for the 2022 BMW 228I, from REIN and SUNSONG.

Listed part numbers: REIN CHT0923, REIN CHT0937 and SUNSONG 5804162.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Turbocharger Gasket parts for the 2022 BMW 228I come from 3 brands — ELRING, AJUSA and MAHLE / CLEVITE. The "Popular" part is AJUSA 01335100.

Listed part numbers: AJUSA 01335100, ELRING 094830 and ELRING 087320, plus the other parts above.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Oil Line parts are listed for the 2022 BMW 228I, from REIN, AJUSA and ÜRO PARTS.

This group includes AJUSA OP11220, REIN TRP0377 and REIN TFP0376 and the remaining parts above.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 BMW 228I — ELRING 876070.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Turbocharger Wastegate Solenoid / Actuator parts are listed for the 2022 BMW 228I, from DORMAN and SKP.

Listed part numbers: DORMAN 667845 and SKP SK6T50672.

This table covers the Valve covers. Read more

3 Valve Cover parts for the 2022 BMW 228I come from 2 brands — ELRING and SKP.

This group includes ELRING B09610, ELRING B37590 and SKP SK743462.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 2022 BMW 228I, from ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. ELRING 593300 carries the "Popular" badge.

Part numbers include ELRING 593300, AJUSA 56094000 and ELRING 083720, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2022 BMW 228I — AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Valve Stem Seal parts are listed for the 2022 BMW 228I, from ELRING, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. ELRING 308970 carries the "Popular" badge.

Part numbers include ELRING 308970, ELRING 308630 and AJUSA 57067700, among others listed above.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2022 BMW 228I — ÜRO PARTS 11378652738.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2022 BMW 228I, from VNE, HOLSTEIN, ÜRO PARTS and 2 other brands. HOLSTEIN 2VTS0370 carries the "Popular" badge.

This group includes HOLSTEIN 2VTS0370, ÜRO PARTS 11367614288 and VEMO V20540005 and the remaining parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.