2022 BMW 440I Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2022 BMW 440I come from 2 brands — ELRING and AJUSA.

This group includes AJUSA 54302500, ELRING 794700 and ELRING 113340.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2022 BMW 440I, from ELRING and AJUSA. ELRING 575970 carries the "Popular" badge.

This group includes ELRING 575970, ELRING 492060 and AJUSA 15075200 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 2022 BMW 440I come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 81069200, ELRING 233380 and ELRING 794480.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2022 BMW 440I come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 10248900, AJUSA 10248910 and ELRING 793491 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2022 BMW 440I come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 52635900 and ELRING 113320.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50565600.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2022 BMW 440I come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 13313000 and ELRING 546900.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 784680.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 748935.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2022 BMW 440I, from ELRING and DORMAN.

This group includes DORMAN 090088, ELRING 455740 and ELRING 427210.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2022 BMW 440I come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 21010400 and ELRING 110507.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

2 Oil Filter parts are listed for the 2022 BMW 440I, from MOBIL and VARIOUS MFR.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C457A.

The Standard Replacement section lists 1 option from VARIOUS MFR — built to original-equipment specification. VARIOUS MFR PG99256EX is listed in this group.

This group includes MOBIL M1C457A and VARIOUS MFR PG99256EX.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 BMW 440I — ELRING 784620.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 BMW 440I — ELRING 351210.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

REIN supplies the 5 Turbocharger Coolant Line parts for the 2022 BMW 440I. REIN CHT0962 carries the "Popular" badge.

Listed part numbers: REIN CHT0962, REIN CHT0963 and REIN CHT0964, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Turbocharger Gasket parts for the 2022 BMW 440I come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 087320.

Listed part numbers: ELRING 087320, AJUSA JTC12750 and ELRING 344890, plus the other parts above.

This table covers the gaskets that seal the Turbocharger Inlet Hose. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 BMW 440I — ELRING 113670.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: REIN TRK0025.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts are listed for the 2022 BMW 440I, from REIN and AJUSA.

This group includes AJUSA OP11237, REIN TFP0390 and REIN TRP0391.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

ELRING supplies both parts for the 2022 BMW 440I.

Part numbers include ELRING 876070 and ELRING 202790.

This table covers the Valve covers. Read more

3 Valve Cover parts for the 2022 BMW 440I come from 2 brands — REIN and SKP.

Listed part numbers: REIN VCE0113, REIN VCK0113 and SKP SK743462.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2022 BMW 440I, from AJUSA and ELRING.

This group includes AJUSA 56080600 and ELRING 091010.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2022 BMW 440I — AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts are listed for the 2022 BMW 440I, from ELRING and AJUSA. ELRING 364500 carries the "Popular" badge.

Listed part numbers: ELRING 364500, ELRING 660360 and AJUSA 57051500, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2022 BMW 440I — GATES VVS229.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.