2022 BMW Z4 Engine Parts

This table covers the Balance Shaft covers. Read more

One part is listed for the 2022 BMW Z4 — DORMAN 926054.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2022 BMW Z4, from AJUSA and ELRING.

Part numbers include AJUSA 54303200 and ELRING 076380.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 2022 BMW Z4 come from 3 brands — ELRING, AJUSA and MAHLE / CLEVITE. The "Popular" part is ELRING 575970.

Listed part numbers: ELRING 575970, ELRING 586550 and AJUSA 15075200, plus the other parts above.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 BMW Z4 — ELRING B45970.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2022 BMW Z4, from AJUSA and ELRING.

Part numbers include AJUSA 81065000 and ELRING 794470.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2022 BMW Z4, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 10248100, AJUSA 10248110 and MAHLE / CLEVITE 55535 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2022 BMW Z4 — AJUSA 52563000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2022 BMW Z4 — AJUSA 50516100.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: REIN HWB0074.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2022 BMW Z4, from AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 13313000, ELRING 076500 and MAHLE / CLEVITE MS20642.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 2022 BMW Z4 come from 3 brands — ÜRO PARTS, ANCHOR and REIN. The "Popular" part is ANCHOR 10343.

The Economy section lists 2 options from ÜRO PARTS — the catalog's value-priced group. ÜRO PARTS 22117581617 is listed in this group.

In the Standard Replacement grade, ANCHOR and REIN supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 10343.

Listed part numbers: ANCHOR 10343, ÜRO PARTS 22117581617 and ÜRO PARTS 22117581618, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

7 Oil parts for the 2022 BMW Z4 come from 4 brands — LIQUI MOLY, PENTOSIN, MOBIL and 1 other brand. The "Popular" part is LIQUI MOLY 22044.

This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2022 BMW Z4 come from 2 brands — MAHLE / CLEVITE and NISSENS.

Listed part numbers: MAHLE / CLEVITE CLC362000S and NISSENS 91395.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 BMW Z4 — AJUSA 77031200.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2022 BMW Z4 come from 3 brands — ELRING, DORMAN and REIN.

Part numbers include DORMAN 090088, ELRING 455740 and ELRING 427210, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 2022 BMW Z4, from AJUSA and ELRING.

Part numbers include AJUSA 21010400 and ELRING 110507.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO214.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

14 Oil Filter parts for the 2022 BMW Z4 come from 13 brands — WIX, PRO-TEC, CHAMP / LUBER-FINER and 10 other brands. The "Popular" part is PRO-TEC PXL10358.

The Economy section: 4 options from PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand. PRO-TEC PXL10358 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C354A is listed in this group.

Standard Replacement: 8 parts, from MAHLE / CLEVITE, MANN, BECK/ARNLEY and 5 other brands. A representative part number is MAHLE / CLEVITE OX8132D.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 BMW Z4 — MAHLE / CLEVITE B33885.

This table covers the Oil Filter covers. Read more

One part is listed for the 2022 BMW Z4 — MOTORAD MO373.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts are listed for the 2022 BMW Z4, from ÜRO PARTS and DORMAN.

This group includes DORMAN 918943, ÜRO PARTS 11428580414 and ÜRO PARTS 11428580414PRM.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING B27620.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Level Sensor Gasket / O-Ring parts for the 2022 BMW Z4 come from ELRING.

Listed part numbers: ELRING 351210 and ELRING 078500.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2022 BMW Z4 — REIN ESK0235.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2022 BMW Z4 — CLOYES C529.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2022 BMW Z4 — CLOYES S1172.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2022 BMW Z4 — CLOYES C528.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2022 BMW Z4 come from CLOYES.

Part numbers include CLOYES 90528SX and CLOYES 90528S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

CLOYES supplies the 3 Timing Chain Guide / Damper parts for the 2022 BMW Z4.

Listed part numbers: CLOYES 96180, CLOYES 96181 and CLOYES 96182.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: CLOYES 96179.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

2 Turbocharger Coolant Line parts for the 2022 BMW Z4 come from REIN.

This group includes REIN CHT0924 and REIN CHT0923.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Turbocharger Gasket parts are listed for the 2022 BMW Z4, from AJUSA, ELRING and MAHLE / CLEVITE. AJUSA 01335100 carries the "Popular" badge.

Part numbers include AJUSA 01335100, AJUSA JTC12488 and ELRING 082230, among others listed above.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2022 BMW Z4 — ELRING 085540.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Oil Line parts for the 2022 BMW Z4 come from 3 brands — REIN, AJUSA and ÜRO PARTS.

Part numbers include AJUSA OP11220, REIN TRP0377 and REIN TFP0376, among others listed above.

This table covers the Valve covers. Read more

2 Valve Cover parts are listed for the 2022 BMW Z4, from ELRING and SKP.

Part numbers include ELRING B37590 and SKP SK743462.

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first. Read more

One part is listed for the 2022 BMW Z4 — ÜRO PARTS 11129454322.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2022 BMW Z4 come from 4 brands — ELRING, BECK/ARNLEY, AJUSA and 1 other brand. The "Popular" part is BECK/ARNLEY 0362095.

Listed part numbers: BECK/ARNLEY 0362095, AJUSA 11162700 and ELRING 076450, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts for the 2022 BMW Z4 come from 4 brands — ELRING, MAHLE / CLEVITE, AJUSA and 1 other brand. The "Popular" part is ELRING 308970.

Listed part numbers: ELRING 308970, ELRING 308630 and AJUSA 57067700, plus the other parts above.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: ÜRO PARTS 11378652738.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2022 BMW Z4 come from 2 brands — GATES and ÜRO PARTS.

Part numbers include GATES VVS229 and ÜRO PARTS 11368696446.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2022 BMW Z4 — AJUSA 01907000.