1975 Bricklin SV-1 Engine Parts

This table covers the Bolt kits. Read more

This group shows a single part: ARP 5549803.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 1975 Bricklin SV-1 come from KING ENGINE BEARINGS.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR814XPN is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR814SI.

Part numbers include KING ENGINE BEARINGS CR814XPN, KING ENGINE BEARINGS CR814XPNX and KING ENGINE BEARINGS CR814SI.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 081091601.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1975 Bricklin SV-1 — KING ENGINE BEARINGS MB5504SI.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

2 Crankshaft Main Bearing Cap Bolt parts for the 1975 Bricklin SV-1 come from ARP.

Listed part numbers: ARP 1545001 and ARP 1545003.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 1975 Bricklin SV-1, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

8 Crankshaft Seal parts are listed for the 1975 Bricklin SV-1, from NATIONAL, MAHLE / CLEVITE, WJB / INMOTION PARTS and 3 other brands. NATIONAL 2942 carries the "Popular" badge.

Listed part numbers: NATIONAL 2942, WJB / INMOTION PARTS WS2942 and BCA NS2942, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: ARP 1543603.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 611032800.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE HS3428Y and VICTOR REINZ 021060601.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 3428SH and VICTOR REINZ 711638100.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 953036 and VICTOR REINZ 011010301.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 1975 Bricklin SV-1 come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP 102206, ATP 102310 and PIONEER DA3515.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

5 Harmonic Balancer Repair Sleeve parts are listed for the 1975 Bricklin SV-1, from MAHLE / CLEVITE, NATIONAL, BCA and 1 other brand. NATIONAL 88187 carries the "Popular" badge.

Listed part numbers: NATIONAL 88187, BCA NS88187 and MAHLE / CLEVITE A2262, plus the other parts above.

This table covers the Intake Manifold bolts. Read more

3 Intake Manifold Bolt parts for the 1975 Bricklin SV-1 come from ARP.

This group includes ARP 1542001, ARP 4542001 and ARP 4542101.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE MS15202 and VICTOR REINZ 111015001.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 2051 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 1975 Bricklin SV-1, from FRAM, WIX, FVP and 2 other brands. WIX 51515XP carries the "Popular" badge.

In the Economy grade, FRAM, FVP, PRO-TEC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FRAM FE16.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51515XP.

The Standard Replacement section: 2 options from WIX and FRAM. WIX 51515 is listed in this group.

This group includes WIX 51515XP, FRAM FE16 and FVP R1515 and the remaining parts above.

This table covers the Oil Pan bolts. Read more

ARP supplies both parts for the 1975 Bricklin SV-1.

Part numbers include ARP 2541802 and ARP 2541901.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1975 Bricklin SV-1, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE OS30541, MAHLE / CLEVITE OS32333 and VICTOR REINZ 101016701, plus the other parts above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 711455400.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts for the 1975 Bricklin SV-1 come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE B26151 and VICTOR REINZ 711350300.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1975 Bricklin SV-1 come from MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE 40564CP.

In the Premium grade, MAHLE / CLEVITE supplies 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 40564CP.

Standard Replacement: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE S50564CP.

Listed part numbers: MAHLE / CLEVITE 40564CP, MAHLE / CLEVITE S40564CP and MAHLE / CLEVITE 40451, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts are listed for the 1975 Bricklin SV-1, from MAHLE / CLEVITE and VICTOR REINZ. MAHLE / CLEVITE T27802 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE T27802, MAHLE / CLEVITE JV856 and MAHLE / CLEVITE JV922, among others listed above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1975 Bricklin SV-1 — VICTOR REINZ 711346500.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 1975 Bricklin SV-1 — VICTOR REINZ 711541700.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1975 Bricklin SV-1 — MAHLE / CLEVITE 46293.

This table covers the Valve covers. Read more

This group shows a single part: ENGINE PRO 311684.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 1975 Bricklin SV-1, from VICTOR REINZ and MAHLE / CLEVITE. MAHLE / CLEVITE VS38300R carries the "Popular" badge.

The Premium section: 1 option from VICTOR REINZ. VICTOR REINZ 151064301 is listed in this group.

The Standard Replacement section: 4 options from MAHLE / CLEVITE and VICTOR REINZ. MAHLE / CLEVITE VS38300R is listed in this group.

Part numbers include MAHLE / CLEVITE VS38300R, VICTOR REINZ 151064301 and MAHLE / CLEVITE VS38300, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1975 Bricklin SV-1 — MAHLE / CLEVITE SS45399.