2010 Buick Allure Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

15 Coolant / Antifreeze parts for the 2010 Buick Allure come from 6 brands — PRESTONE, PEAK, FVP and 3 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 3.0L V6 and the 3.6L V6.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Premium grade, PRESTONE and PEAK supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, PRESTONE, VALVOLINE, ACDELCO and 2 other brands supply 6 parts: built to original-equipment specification. A representative part number is VALVOLINE ZXEL1.

This table covers the Coolant Air Bleed Hose pipes. Read more

This group shows a single part: GM GENUINE 12637183.

This table covers the bleeders used to purge air from the coolant circuit. Read more

2 Coolant Air Bleeder parts are listed for the 2010 Buick Allure, from DORMAN and GM GENUINE. All of them fit every engine offered in the 2010 Allure.

This group includes DORMAN 626588 and GM GENUINE 13267637.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

2 Coolant Hose / Pipe parts for the 2010 Buick Allure come from GM GENUINE. Every part fits both the 3.0L V6 and the 3.6L V6.

Part numbers include GM GENUINE 22965100 and GM GENUINE 22962116.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2010 Buick Allure — ELRING 943630.

This table covers the Coolant Hose Connector flanges. Read more

4 Coolant Hose Connector / Flange parts for the 2010 Buick Allure come from 3 brands — GM GENUINE, DORMAN and MOTORAD.

The Economy section: 1 option from DORMAN. DORMAN 9022091 is listed in this group.

Standard Replacement: 2 parts, from GM GENUINE and MOTORAD. A representative part number is GM GENUINE 20847910.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include DORMAN 9022091, GM GENUINE 20847910 and MOTORAD CH2091, among others listed above.

This table covers the seals at the Coolant Hose Connector / Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2010 Buick Allure — ELRING 943020.

This table covers the gaskets that seal the Coolant Pipe. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2010 Buick Allure — AJUSA 01154600.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

7 Coolant Reservoir parts are listed for the 2010 Buick Allure, from TECHPRO, DORMAN, AUTOTECNICA and 3 other brands. DORMAN 603385 carries the "Popular" badge. All of them fit every engine offered in the 2010 Allure.

This group includes DORMAN 603385, AUTOTECNICA GM0713819 and GM GENUINE 22950436 and the remaining parts above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

4 Coolant Reservoir Cap parts are listed for the 2010 Buick Allure, from AUTOTECNICA, CALORSTAT, DORMAN and 1 other brand. All of them fit every engine offered in the 2010 Allure.

This group includes AUTOTECNICA GM0714619, CALORSTAT RC0144 and DORMAN 54218 and the remaining parts above.

This table covers the Coolant Reservoir retainers and clips. Read more

This group shows a single part: GM GENUINE 13284504.

This table covers the Hose clamps. Read more

This group shows a single part: GM GENUINE 13162312.

This table covers the intercoolers that cool turbo or supercharger charge air. Read more

This group shows a single part: OSC 13329.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

5 Radiator parts for the 2010 Buick Allure come from 5 brands — TYC, AGILITY, CSF and 2 other brands. The "Popular" part is TYC 13146. Every part fits both the 3.0L V6 and the 3.6L V6.

This group includes TYC 13146, AGILITY 8013146 and CSF 3577 and the remaining parts above.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

This group shows a single part: ACDELCO RC124.

This table covers the petcocks used to drain the radiator. Read more

One part is listed for the 2010 Buick Allure — DORMAN 61136.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts are listed for the 2010 Buick Allure, from TECHPRO, GPD, TYC and 2 other brands. TYC 622790 carries the "Popular" badge. All of them fit every engine offered in the 2010 Allure.

Economy: 3 parts, from TECHPRO and GPD. A representative part number is GPD 2811869.

The Standard Replacement section: 3 options from TYC, GM GENUINE and UAC. TYC 622790 is listed in this group.

This group includes TYC 622790, GPD 2811869 and TECHPRO GM3115238 and the remaining parts above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

12 Radiator Hose parts are listed for the 2010 Buick Allure, from ACDELCO, GATES, CONTINENTAL and 1 other brand. ACDELCO 23203513 carries the "Popular" badge. All of them fit every engine offered in the 2010 Allure.

This table covers the Radiator insulators. Read more

One part is listed for the 2010 Buick Allure — GM GENUINE 13306606.

This table covers the Radiator mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2010 Buick Allure — GM GENUINE 52493483.

This table covers the Radiator Mount bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2010 Buick Allure — DORMAN 926280.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

DORMAN supplies both parts for the 2010 Buick Allure. All of them fit every engine offered in the 2010 Allure.

Listed part numbers: DORMAN 700365 and DORMAN 963058.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

13 Temperature Sender / Sensor parts for the 2010 Buick Allure come from 7 brands — NTK, VEMO, GM GENUINE and 4 other brands. The "Popular" part is GM GENUINE 2134777.

The Economy section: 4 options from VEMO, GPD and HOLSTEIN. GPD 1712517 is listed in this group.

Standard Replacement: 9 parts, from NTK, GM GENUINE, WELLS and 1 other brand. A representative part number is GM GENUINE 2134777.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

4 Thermostat parts are listed for the 2010 Buick Allure, from MOTORAD, AUTOTECNICA and SKP. All of them fit every engine offered in the 2010 Allure.

Economy: 2 parts, from AUTOTECNICA and SKP. A representative part number is AUTOTECNICA GM0720267.

The Standard Replacement section: 2 options from MOTORAD. MOTORAD 719180 is listed in this group.

Part numbers include AUTOTECNICA GM0720267, SKP SK902693 and MOTORAD 719180, among others listed above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2010 Buick Allure come from 5 brands — FEL-PRO, GM GENUINE, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO 35856. 11 parts fit every engine; the other 4 are engine-specific.

This table covers the housings and outlets the thermostat sits in. Read more

GM GENUINE supplies both parts for the 2010 Buick Allure. All of them fit every engine offered in the 2010 Allure.

Listed part numbers: GM GENUINE 1511053 and GM GENUINE 1581939.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

15 Water Pump parts are listed for the 2010 Buick Allure, from GM GENUINE, BECK/ARNLEY, SKP and 11 other brands. BECK/ARNLEY 1312378 carries the "Popular" badge. All of them fit every engine offered in the 2010 Allure.

Economy: 7 parts, from BECK/ARNLEY, SKP, CARTER and 4 other brands. A representative part number is BECK/ARNLEY 1312378.

The Standard Replacement section: 8 options from GM GENUINE, ACDELCO, AISIN and 4 other brands. GM GENUINE 12739553 is listed in this group.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Pump Gasket parts for the 2010 Buick Allure come from 5 brands — GM GENUINE, AJUSA, ELRING and 2 other brands. The "Popular" part is GM GENUINE 2512052. 4 parts fit every engine; the other 1 is engine-specific.

This group includes GM GENUINE 2512052, AJUSA 01154400 and ELRING 943600 and the remaining parts above.

This table covers the Water Pump pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

This group shows a single part: GM GENUINE 12611587.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2010 Buick Allure — GM GENUINE 12691259.