96 Engine parts are listed for the 2010 Buick Allure, in 27 part types, covering both the 3.0L V6 and the 3.6L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2010 Buick Allure covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (11 parts), Crankshaft Seal (10 parts) and Cylinder Head Bolt (10 parts). The other 24 part types cover the remaining 65 parts.
The 2010 Buick Allure was sold with both the 3.0L V6 and the 3.6L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
25 brands supply engine parts for the 2010 Buick Allure, led by GM GENUINE (28 parts), MAHLE / CLEVITE (9 parts) and FEL-PRO (8 parts), plus 22 more brands. Quality grades include Standard Replacement and High Performance.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2010 Buick Allure. 16 parts have it, including MAHLE / CLEVITE CB1877A (Connecting Rod Bearing) and FEL-PRO CS263761 (Conversion / Lower Gasket Set). Each part number opens a page with every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12638402 | 🇺🇸 US 🇨🇦 CA | Includes Ring | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19431713 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19433783 | 🇺🇸 US 🇨🇦 CA | Computer Controlled Compatible: YES | View on Amazon |
This table covers the camshafts that open the valves.
GM GENUINE supplies the 3 Camshaft parts for the 2010 Buick Allure.
Part numbers include GM GENUINE 12638402, GM GENUINE 19431713 and GM GENUINE 19433783.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.6L V6 | 15095800 | 🇨🇦 CA | 50 x 70 x 11Clockwise | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12574477 | 🇺🇸 US 🇨🇦 CA | Camshaft Sprocket Seal | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 2010 Buick Allure come from 2 brands — AJUSA and GM GENUINE.
This group includes AJUSA 15095800 and GM GENUINE 12574477.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12590584 | 🇺🇸 US 🇨🇦 CA | Contains Rod, Bolts, Bushing | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
One part is listed for the 2010 Buick Allure — GM GENUINE 12590584.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826XPX | 🇨🇦 CA | Race bearings, Trimetal [Pmax Black]Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826XP | 🇨🇦 CA | SetRace bearings, Trimetal [Pmax Black] | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | CB1877A | 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | CB1877A6 | 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12636003 | 🇺🇸 US 🇨🇦 CA | Use with 2004-11 | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826SI | 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | 5070A | 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 3.6L V6 | 65070A | 🇨🇦 CA | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
8 Connecting Rod Bearing parts are listed for the 2010 Buick Allure, from KING ENGINE BEARINGS, MAHLE / CLEVITE, SEALED POWER and 1 other brand. MAHLE / CLEVITE CB1877A carries the "Popular" badge.
In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6826XPX.
The Standard Replacement section lists 6 options from MAHLE / CLEVITE, SEALED POWER, GM GENUINE and 1 other brand — built to original-equipment specification. MAHLE / CLEVITE CB1877A is listed in this group.
This group includes MAHLE / CLEVITE CB1877A, KING ENGINE BEARINGS CR6826XPX and KING ENGINE BEARINGS CR6826XP and the remaining parts above.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11519680 | 🇺🇸 US 🇨🇦 CA | M9X1X53 | View on Amazon |
This table covers the Connecting Rod bolts.
This group shows a single part: GM GENUINE 11519680.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | CS263761 | 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| SKP Popular Fits: 3.6L V6 | SKCS263761 | 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.6L V6 | 54285100 | 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.6L V6 | 966550 | 🇨🇦 CA | with Crankshaft Seal, Integrated Shaft Seal | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0929106 | 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.6L V6 | CS54661 | 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.6L V6 | 081008601 | 🇨🇦 CA | Improved Design | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
7 Conversion / Lower Gasket Set parts are listed for the 2010 Buick Allure, from FEL-PRO, SKP, AJUSA and 4 other brands. FEL-PRO CS263761 carries the "Popular" badge.
Listed part numbers: FEL-PRO CS263761, SKP SKCS263761 and AJUSA 54285100, plus the other parts above.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12661875 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
One part is listed for the 2010 Buick Allure — GM GENUINE 12661875.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | MS2276A | 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12648786 | 🇺🇸 US 🇨🇦 CA | Contains ONE Upper and Lower | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12648787 | 🇺🇸 US 🇨🇦 CA | Except Brazil (CV2)# 3 | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.6L V6 | MB4272SI | 🇨🇦 CA | SetBimetal (Aluminum Silicon Base) | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | IROX7464MA | 🇨🇦 CA | A-Series aluminum bearingsIROX: Special Polymer Coating | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Crankshaft Main Bearing parts for the 2010 Buick Allure come from 4 brands — GM GENUINE, MAHLE / CLEVITE, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is MAHLE / CLEVITE MS2276A.
Listed part numbers: MAHLE / CLEVITE MS2276A, GM GENUINE 12648786 and GM GENUINE 12648787, plus the other parts above.
Crankshaft Main Bearing Cap Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12560272 | 🇺🇸 US 🇨🇦 CA | M10X2X102.5 | View on Amazon |
This table covers the Crankshaft Main Bearing Cap bolts.
One part is listed for the 2010 Buick Allure — GM GENUINE 12560272.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.6L V6 | NS99166 | 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 99166 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS99166 | 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts for the 2010 Buick Allure come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12608750 | 🇺🇸 US 🇨🇦 CA | Material: Steel Fluoro ElastomerSeal Type: Spring Loaded Multi Lip | View on Amazon |
| NATIONAL Popular Fits: 3.6L V6 | 710674 | 🇨🇦 CA | Front | View on Amazon |
| ELRING Fits: 3.6L V6 | 943150 | 🇨🇦 CA | Radial Shaft Seal Design: AwithBS ofSwirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.6L V6 | 966540 | 🇨🇦 CA | Radial Shaft Seal Design: A/BSwirl Type: Left-hand Twist | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | BS40711 | 🇨🇦 CA | PTFE Rubber Seal | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12637710 | 🇺🇸 US 🇨🇦 CA | Seal Type: Spring Loaded Multi LipIncludes Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | JV1716 | 🇨🇦 CA | Includes Retainer PlateSet | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 710855 | 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710674 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710855 | 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
10 Crankshaft Seal parts for the 2010 Buick Allure come from 6 brands — GM GENUINE, NATIONAL, ELRING and 3 other brands. The "Popular" part is GM GENUINE 12608750.
Crankshaft Seal Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 966530 | 🇨🇦 CA | Frontal sided, engine sided, Water PumpBody code: GT69 | View on Amazon |
This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2010 Buick Allure — ELRING 966530.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 19329667 | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19329668 | 🇺🇸 US 🇨🇦 CA | Reman | View on Amazon |
This table covers the cylinder heads that close the top of the block.
2 Cylinder Head parts for the 2010 Buick Allure come from GM GENUINE.
This group includes GM GENUINE 19329667 and GM GENUINE 19329668.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12570326 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 2010 Buick Allure — GM GENUINE 12570326.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | ES722741 | 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | GS33676 | 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| AJUSA Fits: 3.6L V6 | 81051900 | 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | ES72274 | 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19352499 | 🇺🇸 US 🇨🇦 CA | M11X2X152 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11588734 | 🇺🇸 US 🇨🇦 CA | SINGLE USEM8X1.25X90 | View on Amazon |
| SKP Fits: 3.6L V6 | SKES72274 | 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.6L V6 | 141009701 | 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 143229301 | 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 141013901 | 🇨🇦 CA | SetImproved Design | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
10 Cylinder Head Bolt parts are listed for the 2010 Buick Allure, from VICTOR REINZ, FEL-PRO, GM GENUINE and 3 other brands. FEL-PRO ES722741 carries the "Popular" badge.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | 26377PT | 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12634479 | 🇺🇸 US 🇨🇦 CA | Cylinder Bore Diameter: 3.76 In | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12648843 | 🇺🇸 US 🇨🇦 CA | Cylinder Bore Diameter: 3.76 In | View on Amazon |
| ELRING Fits: 3.6L V6 | 507760 | 🇨🇦 CA | LeftBody code: GT69 | View on Amazon |
| ELRING Fits: 3.6L V6 | 507840 | 🇨🇦 CA | RightBody code: GT69 | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 26376PT | 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0940309 | 🇨🇦 CA | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 54661 | 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 54662 | 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 611041900 | 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 611042000 | 🇨🇦 CA | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
11 Cylinder Head Gasket parts are listed for the 2010 Buick Allure, from FEL-PRO, GM GENUINE, ELRING and 3 other brands. FEL-PRO 26377PT carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | HS26376PT7 | 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | HS54661J | 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| AJUSA Fits: 3.6L V6 | 52535100 | 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | HS26376PT7VK | 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12735536 | 🇺🇸 US 🇨🇦 CA | Gasket Material: Stainless Steel | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 021049402 | 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Cylinder Head Gasket Set parts are listed for the 2010 Buick Allure, from FEL-PRO, MAHLE / CLEVITE, AJUSA and 2 other brands. FEL-PRO HS26376PT7 carries the "Popular" badge.
This group includes FEL-PRO HS26376PT7, MAHLE / CLEVITE HS54661J and AJUSA 52535100 and the remaining parts above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12587380 | 🇺🇸 US 🇨🇦 CA | Use with 2 Pin HeaterEngine Block Heater (K05) | View on Amazon |
| KAT'S HEATERS Fits: 3.6L V6 | 28811 | 🇨🇦 CA | Engine Heater Replacement Cord | View on Amazon |
| KAT'S HEATERS Fits: 3.6L V6 | 11811 | 🇨🇦 CA | Engine Heater Cartridge | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
3 Engine Block Heater parts for the 2010 Buick Allure come from 2 brands — KAT'S HEATERS and GM GENUINE.
Part numbers include GM GENUINE 12587380, KAT'S HEATERS 28811 and KAT'S HEATERS 11811.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 3.6L V6 | GM1228137 | 🇨🇦 CA | Lower | View on Amazon |
This table covers the Engine covers.
One part is listed for the 2010 Buick Allure — TECHPRO GM1228137.
Engine Cover Retainer / Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11518792 | 🇺🇸 US 🇨🇦 CA | M6X7 | View on Amazon |
This table covers the Engine Cover retainers and clips.
This group shows a single part: GM GENUINE 11518792.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.6L V6 | 50494500 | 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2010 Buick Allure — AJUSA 50494500.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12575354 | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 1013335 | 🇨🇦 CA | 1.205 Head Dia. 0.2344 Stem. Nitrided | View on Amazon |
| SBI Fits: 3.6L V6 | 13082 | 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
3 Exhaust Valve parts for the 2010 Buick Allure come from 3 brands — GM GENUINE, QUALCAST and SBI.
Listed part numbers: GM GENUINE 12575354, QUALCAST 1013335 and SBI 13082.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11569584 | 🇺🇸 US 🇨🇦 CA | LowerCup Diameter 34.4mm | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
One part is listed for the 2010 Buick Allure — GM GENUINE 11569584.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12590679 | 🇺🇸 US 🇨🇦 CA | Mounting Hardware Included: No | View on Amazon |
| DORMAN Fits: 3.6L V6 | 926441 | 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.6L V6 | VT0244 | 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | GDF101 | 🇨🇦 CA | O.E.M. Replacement: Yes | View on Amazon |
| WELLS Fits: 3.6L V6 | 5T5012 | 🇨🇦 CA | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
5 Fuel Pump Camshaft Follower parts are listed for the 2010 Buick Allure, from GM GENUINE, DORMAN, INA and 2 other brands. GM GENUINE 12590679 carries the "Popular" badge.
This group includes GM GENUINE 12590679, DORMAN 926441 and INA VT0244 and the remaining parts above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12697768 | 🇺🇸 US 🇨🇦 CA | Single Belt with Keyway | View on Amazon |
| ATP Fits: 3.6L V6 | 102366 | 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.6L V6 | PB1509N | 🇨🇦 CA | Premium | View on Amazon |
| DORMAN Fits: 3.6L V6 | 594420 | 🇨🇦 CA | with Keywaywith Single Belt | View on Amazon |
| PIONEER Fits: 3.6L V6 | DA6008 | 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
5 Harmonic Balancer parts are listed for the 2010 Buick Allure, from GM GENUINE, ATP, DAYCO and 2 other brands. GM GENUINE 12697768 carries the "Popular" badge.
Listed part numbers: GM GENUINE 12697768, ATP 102366 and DAYCO PB1509N, plus the other parts above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 595005 | 🇨🇦 CA | M14 X 1.50 X 48.4 mm | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11549124 | 🇺🇸 US 🇨🇦 CA | M14X1.5X48.4 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts for the 2010 Buick Allure come from 2 brands — DORMAN and GM GENUINE.
Listed part numbers: DORMAN 595005 and GM GENUINE 11549124.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LARES Fits: 3.6L V6 | 33410 | 🇨🇦 CA | UpperOE # 12635243, 12648915, 12699182 | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
This group shows a single part: LARES 33410.
Buying Engine Parts for a 2010 Buick Allure
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2010 Buick Allure?
Our catalog currently lists 96 engine parts for the 2010 Buick Allure across 27 subcategories and 25 brands, covering both the 3.0L V6 and the 3.6L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2010 Buick Allure engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2010 Buick Allure?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2010 Buick Allure was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2010 Buick Allure?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2010 Buick Allure
Engine Parts for Other Buick Allure Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.