How many engine parts fit the 2009 Cadillac CTS?

Our catalog currently lists 641 engine parts for the 2009 Cadillac CTS across 119 subcategories and 60 brands, covering both the 3.6L V6 and the 6.2L V8 Supercharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2009 Cadillac CTS engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2009 Cadillac CTS?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2009 Cadillac CTS was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2009 Cadillac CTS?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

2009 Cadillac CTS Engine Parts: OEM & Replacement (641 Parts)

Q: What oil viscosity is listed for the 2009 Cadillac CTS?

Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

Barometric Pressure Sensor

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	2134681	🇺🇸 US 🇨🇦 CA	Use with Connector PT2798 with LeadsMates with Connector 13585850 with Leads	View on Amazon

This table covers the Barometric pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.

Camshaft

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	22205	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22205 Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	22309	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22309 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	22310	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22310 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	22206	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22206 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	22207	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22207 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	22307	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22307 Stage 3High PerformanceNo Warranty RPM Range: Idle-50003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22308	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22308 Stage 3High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 242Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22239	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22239 Stage 2High Performance RPM Range: 1750-52503 Bolt Non VVT111.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 215Exhaust Duration at .050 Lift: 225Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22240	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22240 Stage 2High Performance RPM Range: 1950-54503 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 219Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22323	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22323 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22324	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22324 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22325	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22325 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22326	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22326 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22327	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22327 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22328	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING 22328 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22333	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22333 Stage 3High Performance RPM Range: 2150-56503 Bolt Non VVT114.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 223Exhaust Duration at .050 Lift: 229Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22405	🇺🇸 US 🇨🇦 CA	Stage 4High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22405 Stage 4High Performance (May Not be Computer Compatible) RPM Range: 2550-60500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 231Exhaust Duration at .050 Lift: 233Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22406	🇺🇸 US 🇨🇦 CA	Stage 4High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22406 Stage 4High Performance (May Not be Computer Compatible) RPM Range: 2350-58450.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 235Exhaust Duration at .050 Lift: 235Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22422	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22422 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22423	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22423 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22424	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22424 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22425	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING 22425 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22426	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22426 Stage 4High Performance RPM Range: 2350-58503 Bolt Non VVT116 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 227Exhaust Duration at .050 Lift: 231Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22501	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING 22501 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22502	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING 22502 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22503	🇺🇸 US 🇨🇦 CA	Stage 5High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22503 Stage 5High Performance (May Not be Computer Compatible) RPM Range: 2950-64500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 239Exhaust Duration at .050 Lift: 237Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22411	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22411 Stage 4High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22412	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22412 Stage 4High PerformanceNo Warranty RPM Range: 2000-65003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Non Active Fuel Management EngineHydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22413	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22413 Stage 4High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	22500	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING 22500 Stage 5High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22425D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22500D	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500D Stage 5High PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22309B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22310B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22207D	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Dual Springs Fitment notes — MELLING CK22207D Stage 2 LSl High PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22325D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22326D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22328D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22422D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22423D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423D Stage 4 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22424D	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22501D	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501D Stage 5 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22502D	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502D Stage 5 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22205B	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING CK22205B Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineChromoly Retainers with Beehive Springs112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22206B	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22206B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22207B	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22207B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22323B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22324B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22325B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22326B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22327B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22328B	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22422B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22423B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22424B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22425B	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22206DT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22412D	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412D Stage 4High PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22307B	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING CK22307B Stage 3High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22411B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22411B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22412B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22413B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22413B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22500B	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500B Stage 5High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22501B	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22502B	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22309BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22310BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22207BT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22323BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22325BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22326BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22327BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22328BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22422BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22423BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22424BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22425BT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22205BT	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING CK22205BT Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainers, Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22206BT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22324BT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22307BT	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING CK22307BT Stage 3High PerformanceNo Warranty RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22411BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22411BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22412BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22413BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22413BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22500BT	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500BT Stage 5High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22207DT	🇺🇸 US 🇨🇦 CA	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22325DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22326DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22327DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22328DT	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22422DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22423DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22424DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22425DT	🇺🇸 US 🇨🇦 CA	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22501DT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22502DT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22501BT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22502BT	🇺🇸 US 🇨🇦 CA	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22412DT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412DT Stage 4High PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	CK22327D	🇺🇸 US 🇨🇦 CA	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand	Part Number	Markets	Notes	Buy
DURA-BOND Popular Fits: 6.2L V8 Supercharged	CH25	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	19260874	🇺🇸 US 🇨🇦 CA	Position # 1 and # 5Diameter 2.353-2.354	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	19260875	🇺🇸 US 🇨🇦 CA	Position # 2 and # 4Diameter 2.334-2.335	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	9232	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9232 High Performance CenterReplacement Camshaft Sprocket Thrust Bearing	View on Amazon
DURA-BOND Fits: 6.2L V8 Supercharged	CHP25	🇺🇸 US 🇨🇦 CA		View on Amazon
DURA-BOND Fits: 6.2L V8 Supercharged	CHP25T	🇺🇸 US 🇨🇦 CA	Coated	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	19260876	🇺🇸 US 🇨🇦 CA	Position # 3Diameter 2.314-2.315	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CS5171BB	🇺🇸 US 🇨🇦 CA	Bi-Metal (Babbitt) Fitment notes — KING ENGINE BEARINGS CS5171BB Bi-Metal (Babbitt) .775 IN Wide	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CS5510HP	🇺🇸 US 🇨🇦 CA	alecular	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CS5510HPT	🇺🇸 US 🇨🇦 CA	Coatedalecular Fitment notes — KING ENGINE BEARINGS CS5510HPT Coatedalecular High PerformanceCoated	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	1923M	🇺🇸 US 🇨🇦 CA	0.775 IN WidePosition # 1 or Position # 5	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	2115M	🇺🇸 US 🇨🇦 CA	Not Coated	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	C2115M	🇺🇸 US 🇨🇦 CA	High PerformanceCoated	View on Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	857390	🇺🇸 US 🇨🇦 CA	Retainer Bolt	View on Amazon

This table covers the Camshaft bolts.

Camshaft Dowel Pin

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	24575061	🇺🇸 US 🇨🇦 CA	Outside Diameter (In): 0.185 In Fitment notes — GM GENUINE 24575061 Outside Diameter (In): 0.185 In 17MM LONG	View on Amazon

This table covers the Camshaft Dowel pins.

Camshaft Gear Installation Tool

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	CSITLS	🇺🇸 US 🇨🇦 CA	No Warranty Fitment notes — MELLING CSITLS No Warranty Designed To AID In The Installation of Both Camshaft Sprockets and VVT PhasersCan be Used On Both Single and Three Bolt Camshafts	View on Amazon

This table covers the Camshaft Gear Installation tools. This is a service tool, not a wear part — match the application in the notes.

Camshaft Hardware Kit

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.2L V8 Supercharged	HK119	🇺🇸 US		View on Amazon

This table covers the Camshaft hardware kits.

Camshaft Retainer / Thrust Plate

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	ES73115	🇺🇸 US 🇨🇦 CA	Camshaft retainer plate & mounting bolts includedComplete Set Fitment notes — FEL-PRO ES73115 Camshaft retainer plate & mounting bolts includedComplete Set Will Service Both Recessed Bolt Holes & Flat-Type Bolt Holes	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	MF127	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.2L V8 Supercharged	857150	🇺🇸 US 🇨🇦 CA	without Bolts/Screws Fitment notes — ELRING 857150 without Bolts/Screws Front	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	857320	🇺🇸 US 🇨🇦 CA	with Bolts/Screws Fitment notes — ELRING 857320 with Bolts/Screws Front	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	CR6437	🇺🇸 US	Retainer Plate with Flat Bolt Holes	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	CR9016	🇺🇸 US	Retainer plate with recessed bolt holes	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12589016	🇺🇸 US 🇨🇦 CA	Includes Seal Fitment notes — GM GENUINE 12589016 Includes Seal Use with Bolt 11561455	View on Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Camshaft Seal

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: 6.2L V8 Supercharged	01713900	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	B32270	🇺🇸 US 🇨🇦 CA	Steel with Molded RubberCamshaft Cover Gasket Fitment notes — MAHLE / CLEVITE B32270 Steel with Molded RubberCamshaft Cover Gasket Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	711836900	🇺🇸 US 🇨🇦 CA	with Recessed Bolts	View on Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: 6.2L V8 Supercharged	11663H	🇺🇸 US 🇨🇦 CA	Performance H SeriesSet Fitment notes — ENGINE PRO 11663H Performance H SeriesSetPair	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	11663HX	🇺🇸 US 🇨🇦 CA	High PerformanceExtra Oil Clearance of .001 Fitment notes — ENGINE PRO 11663HX High PerformanceExtra Oil Clearance of .001Pair (Size: Standard)	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	11663HD	🇺🇸 US 🇨🇦 CA	High Performancewith dowel hole Fitment notes — ENGINE PRO 11663HD High Performancewith dowel holePair	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	11663HC	🇺🇸 US 🇨🇦 CA	High PerformanceCoated Fitment notes — ENGINE PRO 11663HC High PerformanceCoatedPerformance H Series CoatedSetPairNitro Black Coated Performance	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	11663HXC	🇺🇸 US 🇨🇦 CA	High PerformanceCoated Fitment notes — ENGINE PRO 11663HXC High PerformanceCoatedExtra Oil Clearance of .001Performance H Series +.001 Bearing Oversize CoatedSetPairNitro Black Coated Performance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CR807HPND	🇺🇸 US 🇨🇦 CA	SetRace bearings, BI-Metal [Alecular] Fitment notes — KING ENGINE BEARINGS CR807HPND SetRace bearings, BI-Metal [Alecular]Narrowwith dowel hole	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CR807HPNDX	🇺🇸 US 🇨🇦 CA	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNDX Race bearings, BI-Metal [Alecular]SetNarrowwith Extra Oil Clearancewith dowel hole	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HN	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HN High PerformanceH Series (Tri-Metal)NarrowedPairMax. Length: 0.7920 N	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HND	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HND High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting RodPairMax. Length: 0.7920	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663FN	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FN High PerformancePairNarrowed F Series (Tri-Metal)N	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663VN	🇺🇸 US 🇨🇦 CA	High PerformanceNarrowed Fitment notes — MAHLE / CLEVITE CB663VN High PerformanceNarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair N	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663VXN	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663VXN High Performance.001in Extra Oil Clearance / NarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663FND	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FND High PerformancePairNarrowed / Doweled Connecting Rod F Series (Tri-Metal)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663FXN	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXN High PerformancePair.001in Extra Oil Clearance / Narrowed F Series (Tri-Metal)XN	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663FXND	🇺🇸 US 🇨🇦 CA	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXND High PerformancePair.001in Extra Oil Clearance / Narrowed / Doweled Connecting Rod F Series (Tri-Metal)XND	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HXN	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663HXN High Performance.001in Extra Oil Clearance / NarrowedH Series (Tri-Metal)PairMax. Length: 0.7920 XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HXND	🇺🇸 US 🇨🇦 CA	High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting Rod Fitment notes — MAHLE / CLEVITE CB663HXND High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting RodH Series (Tri-Metal)PairMax. Length: 0.7920 XND (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HNC	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNC High PerformanceH Series (Tri-Metal)Narrowed / CoatedPair NC	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HXNC	🇺🇸 US 🇨🇦 CA	High Performance.001in Extra Oil Clearance / Narrowed / Coated Fitment notes — MAHLE / CLEVITE CB663HXNC High Performance.001in Extra Oil Clearance / Narrowed / CoatedH Series (Tri-Metal)Pair XNC (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB663HNDC	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNDC High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting Rod / CoatedPair	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.2L V8 Supercharged	BB253J	🇺🇸 US	Set Fitment notes — ENGINETECH BB253J Set Standard OD	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	CB663A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB663A A Series (Aluminum)PairVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	CB663P	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Pair Fitment notes — MAHLE / CLEVITE CB663P P Series (Tri-Metal)Pair Chevrolet Engine	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	CB663A8	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB663A8 A Series (Aluminum)SetVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	CB663P8	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Set Fitment notes — MAHLE / CLEVITE CB663P8 P Series (Tri-Metal)SetVertical Oil Clearance (minimum): 0.0007	View on Amazon
SEALED POWER Popular Fits: 6.2L V8 Supercharged	2555CP	🇺🇸 US 🇨🇦 CA	Overplated Copper-Lead Alloy Fitment notes — SEALED POWER 2555CP Overplated Copper-Lead Alloy 1.5800 IN Wall Thickness	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	BB353J	🇺🇸 US	Set Fitment notes — ENGINETECH BB353J Set 0.002 Oversized OD	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	89017811	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB1776A	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB1776A A Series (Aluminum)Pair Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	CB1776A8	🇺🇸 US 🇨🇦 CA	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB1776A8 A Series (Aluminum)Set Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	2555A	🇺🇸 US 🇨🇦 CA	A-Series Aluminum BearingsStandard Shaft Minimum (Inch): 2.0990 In	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	82555A	🇺🇸 US 🇨🇦 CA	SetA-Series aluminum bearings	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	82555CP	🇺🇸 US 🇨🇦 CA	SetOverplated Copper-Lead Alloy	View on Amazon

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CR807HPNX	🇺🇸 US 🇨🇦 CA	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNX Race bearings, BI-Metal [Alecular]Setwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	CR807HPN	🇺🇸 US 🇨🇦 CA	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPN Race bearings, BI-Metal [Alecular]SetNarrow	View on Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	11570662	🇺🇸 US 🇨🇦 CA	SINGLE USEM9X44,13	View on Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	CS5975A	🇺🇸 US 🇨🇦 CA	Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
AJUSA Fits: 6.2L V8 Supercharged	54290500	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 6.2L V8 Supercharged	ACS3072	🇺🇸 US 🇨🇦 CA	with Camshaft retainer plate	View on Amazon
APEX Fits: 6.2L V8 Supercharged	ACS3071	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.2L V8 Supercharged	816400	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Oil Drain Plug	View on Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Popular Fits: 6.2L V8 Supercharged	MB5013XP	🇺🇸 US 🇨🇦 CA	PmaxblackSet	View on Amazon
KING ENGINE BEARINGS Popular Fits: 6.2L V8 Supercharged	MB5013XPX	🇺🇸 US 🇨🇦 CA	SetPmaxblack Fitment notes — KING ENGINE BEARINGS MB5013XPX SetPmaxblackwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	MB5013HP	🇺🇸 US 🇨🇦 CA	Setalecular	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	MB5013HPX	🇺🇸 US 🇨🇦 CA	alecularSet Fitment notes — KING ENGINE BEARINGS MB5013HPX alecularSetwith Extra Oil Clearance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	MB5013XPC	🇺🇸 US 🇨🇦 CA	Race bearings, TRI-Metal [Pmax Kote], coatedSet	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	MS2294H	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2294H High PerformanceH Series (Tri-Metal)Set	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	MS2294HX	🇺🇸 US 🇨🇦 CA	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2294HX High PerformanceH Series (Tri-Metal)Set .001 IN Extra Oil Clearance (Size: Standard)	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	MS2294P	🇺🇸 US 🇨🇦 CA	P Series (Tri-Metal)Set	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	89017572	🇺🇸 US 🇨🇦 CA	Standard# 3 Fitment notes — GM GENUINE 89017572 Standard# 3Thrust Bearing	View on Amazon

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	MB5013XPCX	🇺🇸 US 🇨🇦 CA	Race bearings, TRI-Metal [Pmax Kote], coatedSet Fitment notes — KING ENGINE BEARINGS MB5013XPCX Race bearings, TRI-Metal [Pmax Kote], coatedSetwith Extra Oil Clearance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged	MB1328XPX	🇺🇸 US 🇨🇦 CA	Setwith Extra Oil Clearance Fitment notes — KING ENGINE BEARINGS MB1328XPX Setwith Extra Oil ClearancePmaxblack (Size: Standard)	View on Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12556127	🇺🇸 US 🇨🇦 CA	M8X1.25X24	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12560272	🇺🇸 US 🇨🇦 CA	SINGLE USEM10X2X102.5	View on Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Main Bearing Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
VICTOR REINZ Fits: 6.2L V8 Supercharged	711348000	🇺🇸 US 🇨🇦 CA	CrankshaftCrankshaft Machining Required	View on Amazon

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface.

Crankshaft Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
WJB / INMOTION PARTS Popular Fits: 6.2L V8 Supercharged	WS99210	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	16229	🇺🇸 US 🇨🇦 CA	RearWide Lip Fitment notes — FEL-PRO 16229 RearWide Lip1.156 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	16228	🇺🇸 US 🇨🇦 CA	RearNarrow Lip Fitment notes — FEL-PRO 16228 RearNarrow Lip0.780 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
NATIONAL Fits: 6.2L V8 Supercharged	99210	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	711457300	🇺🇸 US 🇨🇦 CA	RearWide Lip Fitment notes — VICTOR REINZ 711457300 RearWide Lip1.156 IN LengthCrankshaft Machining Required	View on Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Repair Sleeve Tool

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: 6.2L V8 Supercharged	16329	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: 6.2L V8 Supercharged	ABS371	🇺🇸 US 🇨🇦 CA	Rearwith Housing Gasket	View on Amazon
APEX Popular Fits: 6.2L V8 Supercharged	ABS372	🇺🇸 US 🇨🇦 CA	Rearwith Rear Main Seal Cover, Housing Gasket & Bolts	View on Amazon
FEL-PRO Popular Fits: 6.2L V8 Supercharged	BS40640	🇺🇸 US 🇨🇦 CA	PTFE RubberIncludes Sleeve Fitment notes — FEL-PRO BS40640 PTFE RubberIncludes Sleeve Rear1 Piece	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	89060436	🇺🇸 US 🇨🇦 CA	RearReverse Lip Seal	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	29602	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
TIMKEN Popular Fits: 6.2L V8 Supercharged	100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
ACDELCO Fits: 6.2L V8 Supercharged	100085	🇺🇸 US 🇨🇦 CA	Gold Fitment notes — ACDELCO 100085 Gold RearSeal Only	View on Amazon
ACDELCO Fits: 6.2L V8 Supercharged	100470	🇺🇸 US 🇨🇦 CA	Gold Fitment notes — ACDELCO 100470 Gold FrontFluoroelastomer Material	View on Amazon
AJUSA Fits: 6.2L V8 Supercharged	15113900	🇺🇸 US 🇨🇦 CA	FrontClockwise	View on Amazon
APEX Fits: 6.2L V8 Supercharged	ATC3711	🇺🇸 US 🇨🇦 CA	Seal Only Fitment notes — APEX ATC3711 Seal Only Front	View on Amazon
APEX Fits: 6.2L V8 Supercharged	ABS377	🇺🇸 US 🇨🇦 CA	Seal Only Fitment notes — APEX ABS377 Seal Only Rear	View on Amazon
AUTOTECNICA Fits: 6.2L V8 Supercharged	GM1419631	🇺🇸 US 🇨🇦 CA	Includes Seal, Gasket & Hardware	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	877130	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist Fitment notes — ELRING 877130 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist RearTransmission Side	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	868600	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist Fitment notes — ELRING 868600 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand TwistFront	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3112639249	🇺🇸 US 🇨🇦 CA	Kit Fitment notes — ENGINE PRO 3112639249 Kit Also Fits LS6 EnginesRear Main	View on Amazon
NATIONAL Fits: 6.2L V8 Supercharged	100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
NATIONAL Fits: 6.2L V8 Supercharged	100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
SCHAEFFLER Fits: 6.2L V8 Supercharged	SS3130	🇺🇸 US 🇨🇦 CA	Front2.85" O.D. X 0.32" Width	View on Amazon
SCHAEFFLER Fits: 6.2L V8 Supercharged	SS3405	🇺🇸 US 🇨🇦 CA	RearViton-Teflon	View on Amazon
SKF Fits: 6.2L V8 Supercharged	38617	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK100470	🇺🇸 US 🇨🇦 CA	Frontfluoroelastomer	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK100085	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
TIMKEN Fits: 6.2L V8 Supercharged	100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	BS40640	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ULTRA-POWER BS40640 Set RearProtective Sleeve Included To Prevent Seal Lip Damage During InstallationPtfe Rubber Seal1 Piece	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	191008001	🇺🇸 US 🇨🇦 CA	PTFESet Fitment notes — VICTOR REINZ 191008001 PTFESet Rear1 Piece	View on Amazon
WJB / INMOTION PARTS Fits: 6.2L V8 Supercharged	WS100085	🇺🇸 US 🇨🇦 CA	Inside Diameter: 3.8580000000000001 In Fitment notes — WJB / INMOTION PARTS WS100085 Inside Diameter: 3.8580000000000001 In Rear	View on Amazon
WJB / INMOTION PARTS Fits: 6.2L V8 Supercharged	WS100470	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 6.2L V8 Supercharged	635518	🇺🇸 US 🇨🇦 CA	Improved DesignMust Use Dorman 635-000 Installation Tool or Equivalent	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12639250	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK635518	🇺🇸 US 🇨🇦 CA	Includes Bolts, Gasket, Housing, and Seal	View on Amazon

This table covers the Crankshaft Seal covers.

Crankshaft Seal Cover Tool

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 6.2L V8 Supercharged	635000	🇺🇸 US 🇨🇦 CA	IMPROVED DESIGN	View on Amazon

This table covers the Crankshaft Seal Cover tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	782350	🇺🇸 US 🇨🇦 CA	Gasket Design: Metal Elastomer Gasket Fitment notes — ELRING 782350 Gasket Design: Metal Elastomer Gasket UpperFRONT	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	104560	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws Fitment notes — ELRING 104560 with Crankshaft Seal, Bolts/Screws transmission sided	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12639249	🇺🇸 US 🇨🇦 CA	Color: Black, Coated Aluminum Fitment notes — GM GENUINE 12639249 Color: Black, Coated Aluminum Rear	View on Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head

Brand	Part Number	Markets	Notes	Buy
CYLINDER HEAD EXPRESS Fits: 6.2L V8 Supercharged	CI530B	🇺🇸 US 🇨🇦 CA	New Bare Cylinder Head Casting - No Valves or Springs Fitment notes — CYLINDER HEAD EXPRESS CI530B New Bare Cylinder Head Casting - No Valves or Springs Fits: LeftCasting # 1259, 5364, 823, 821 or: RightCasting # 1259, 5364, 823, 821	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12675872	🇺🇸 US 🇨🇦 CA	INCLUDES HEAD,GUIDES,SEATS	View on Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand	Part Number	Markets	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12570326	🇺🇸 US 🇨🇦 CA	View on Amazon
PIONEER Fits: 6.2L V8 Supercharged	S1115	🇺🇸 US 🇨🇦 CA	View on Amazon
PIONEER Fits: 6.2L V8 Supercharged	PG525	🇺🇸 US 🇨🇦 CA	View on Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: 6.2L V8 Supercharged	AHB390	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
FEL-PRO Popular Fits: 6.2L V8 Supercharged	ES72390	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	HB288	🇺🇸 US	Set	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	HBK288	🇺🇸 US	Set Fitment notes — ENGINETECH HBK288 Set Full Engine Set	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	19258707	🇺🇸 US 🇨🇦 CA	M11X2X100	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12558840	🇺🇸 US 🇨🇦 CA	SINGLE USEM8X1.25X45	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	GS33449	🇺🇸 US 🇨🇦 CA	Cylinder Head Bolt KitSet Fitment notes — MAHLE / CLEVITE GS33449 Cylinder Head Bolt KitSetSteel	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SKAHB389	🇺🇸 US 🇨🇦 CA		View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	141009901	🇺🇸 US 🇨🇦 CA	Set	View on Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Popular Fits: 6.2L V8 Supercharged	475625	🇺🇸 US 🇨🇦 CA	Installed Thickness [MM]: 1,35	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12622033	🇺🇸 US 🇨🇦 CA	Fits 6 speed Automatic trans.Head Bolt Replacement Requiredor 6 speed Manual trans. Fitment notes — GM GENUINE 12622033 Fits: 6 speed Automatic trans.Head Bolt Replacement Requiredor 6 speed Manual trans.Head Bolt Replacement Required	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AHG1424	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	2812622033	🇺🇸 US 🇨🇦 CA	Number of Layers: 7	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	HC364A	🇺🇸 US 🇨🇦 CA	Multi-Layer Steel Fitment notes — ENGINETECH HC364A Multi-Layer Steel Engine VIN code R,TCorvette	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	26778PT	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	54983	🇺🇸 US 🇨🇦 CA	Multi-Layered Steel	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK615215	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: 6.2L V8 Supercharged	52612200	🇺🇸 US 🇨🇦 CA	Complete Set	View on Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	11610259	🇺🇸 US 🇨🇦 CA	M12X1.5X21.2Hex, Socket	View on Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	CSL359F	🇺🇸 US 🇨🇦 CA	Aluminum Cylinder Block OnlySemi Finished Inside Diameter	View on Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Heater

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12586687	🇺🇸 US 🇨🇦 CA	Engine Block Heater (K05)	View on Amazon
KAT'S HEATERS Fits: 6.2L V8 Supercharged	11484	🇺🇸 US 🇨🇦 CA	Freeze Plug Heater Fitment notes — KAT'S HEATERS 11484 Freeze Plug Heater Easiest Mounting Location: Front LeftThreadedThreaded Electrical Plug End28mm400 Watts	View on Amazon
KAT'S HEATERS Fits: 6.2L V8 Supercharged	28510	🇺🇸 US 🇨🇦 CA	Engine Heater Replacement Cord Fitment notes — KAT'S HEATERS 28510 Engine Heater Replacement Cord 120 Volts18 Gauge3 Wire3 Prong5 ft.with Thermostat	View on Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Cover

Brand	Part Number	Markets	Notes	Buy
TECHPRO Fits: 6.2L V8 Supercharged	GM1228138	🇺🇸 US 🇨🇦 CA	LowerAir Deflector Assembly	View on Amazon

This table covers the Engine covers.

Engine Cover Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	795390	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the Engine Cover bolts.

Engine Cover Grommet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12594875	🇺🇸 US 🇨🇦 CA	Material: Rubber Fitment notes — GM GENUINE 12594875 Material: Rubber Top	View on Amazon

This table covers the Engine Cover grommets.

Engine Kit Gasket Set

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: 6.2L V8 Supercharged	50551500	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12582719	🇺🇸 US 🇨🇦 CA	Material: Stainless Steel Fitment notes — GM GENUINE 12582719 Material: Stainless Steel Standard	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	0113042	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8 Supercharged	V3042	🇺🇸 US 🇨🇦 CA		View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	1013042	🇺🇸 US 🇨🇦 CA	1.593 Head Diameter. 0.3136 Stem Diameter.	View on Amazon
SBI Fits: 6.2L V8 Supercharged	13042	🇺🇸 US 🇨🇦 CA	Stainless Steel	View on Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	MPE900BR	🇺🇸 US 🇨🇦 CA	BrassOil Galley Plug Not Included Fitment notes — MELLING MPE900BR BrassOil Galley Plug Not Included Cylinder Block Kit	View on Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Harmonic Balancer

High Performance

Brand	Part Number	Markets	Notes	Buy
DAYCO Fits: 6.2L V8 Supercharged	PBO1662SS5	🇺🇸 US 🇨🇦 CA	Race Performance 5% Overdrive	View on Amazon
DAYCO Fits: 6.2L V8 Supercharged	PBO1662SS10	🇺🇸 US 🇨🇦 CA	Race Performance 10% Overdrive	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12674581	🇺🇸 US 🇨🇦 CA	Use with FRICTION WASHER 12674588	View on Amazon
VAICO Fits: 6.2L V8 Supercharged	V510615	🇺🇸 US 🇨🇦 CA	Pulley Only	View on Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	11570046	🇺🇸 US 🇨🇦 CA	M16X2X110.5	View on Amazon

This table covers the Harmonic Balancer bolts.

Harmonic Balancer Washer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12674588	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Harmonic Balancer washers.

Intake Insulator

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12559120	🇺🇸 US 🇨🇦 CA	Cover Insulator Fitment notes — GM GENUINE 12559120 Cover Insulator UpperHorse-Shoe Shaped	View on Amazon

This table covers the Intake insulators.

Intake Manifold Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12626332	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon

This table covers the Intake Manifold covers.

Intake Manifold Gasket

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	19180613	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	MS19305	🇺🇸 US 🇨🇦 CA	SetMolded Rubber Fitment notes — MAHLE / CLEVITE MS19305 SetMolded Rubber Lifter Valley Gasket Type	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AMS3901	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AMS3901 Set Lifter Valley Cover Set Type	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	782080	🇺🇸 US 🇨🇦 CA	Gasket Design: Metal Elastomer Gasket	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	MS96169	🇺🇸 US 🇨🇦 CA	Includes SealValley Gasket Fitment notes — FEL-PRO MS96169 Includes SealValley GasketSet	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12610141	🇺🇸 US 🇨🇦 CA	Valley Pan	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK615211	🇺🇸 US 🇨🇦 CA		View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	111028901	🇺🇸 US 🇨🇦 CA	Set Fitment notes — VICTOR REINZ 111028901 Set Valley Pan	View on Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand	Part Number	Markets	Notes	Buy
QUALCAST Fits: 6.2L V8 Supercharged	1013240	🇺🇸 US 🇨🇦 CA	2.165 Head Dia. 4.870 OAL. with Automatic Transmission 0.204 Tip to Groove	View on Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Economy

Brand	Part Number	Markets	Notes	Buy
SKP Popular Fits: 6.2L V8 Supercharged	SKM3328	🇺🇸 US 🇨🇦 CA		View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ANCHOR Fits: 6.2L V8 Supercharged	3328	🇺🇸 US 🇨🇦 CA	Fits Front Leftwith Fixed Stud Fitment notes — ANCHOR 3328 Fits: Front Leftwith Fixed Studwith 1 Bolt Hole MountingHydraulic or: Front Rightwith Fixed Studwith 1 Bolt Hole MountingHydraulic	View on Amazon
DEA / MARMON RIDE CONTROL Fits: 6.2L V8 Supercharged	A5774	🇺🇸 US 🇨🇦 CA	Fits Front Right Fitment notes — DEA / MARMON RIDE CONTROL A5774 Fits: Front Right or: Front Left	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	15234751	🇺🇸 US 🇨🇦 CA		View on Amazon
WESTAR Fits: 6.2L V8 Supercharged	EM4248	🇺🇸 US 🇨🇦 CA	Front	View on Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Bracket Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	11588741	🇺🇸 US 🇨🇦 CA	Plant Operation (JJB)M10X1.5X45	View on Amazon

This table covers the Motor Mount Bracket bolts.

Motor Mount Kit

Brand	Part Number	Markets	Notes	Buy
ANCHOR Fits: 6.2L V8 Supercharged	300503	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.

Full Synthetic

Brand	Part Number	Markets	Notes	Buy
LIQUI MOLY Popular Fits: 6.2L V8 Supercharged	20228	🇺🇸 US 🇨🇦 CA	Molygen New Generation 5W-305 Liter	View on Amazon
MOBIL Popular Fits: 6.2L V8 Supercharged	125195	🇺🇸 US 🇨🇦 CA	Full Synthetic 5W-30Mobil Full Synthetic Fitment notes — MOBIL 125195 Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Popular Fits: 6.2L V8 Supercharged	124315	🇺🇸 US 🇨🇦 CA	5W-30Mobil 1 Advanced Fitment notes — MOBIL 124315 5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart	View on Amazon
VALVOLINE Popular Fits: 6.2L V8 Supercharged	VV955	🇺🇸 US 🇨🇦 CA	Advanced Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
IDEMITSU Fits: 6.2L V8 Supercharged	30013015750	🇺🇸 US	Full Synthetic 5W-30 GF-6/SP1 Quart	View on Amazon
IDEMITSU Fits: 6.2L V8 Supercharged	30013015953	🇺🇸 US	Full Synthetic 5W-30 GF-6/SP5 Quart	View on Amazon
LIQUI MOLY Fits: 6.2L V8 Supercharged	20136	🇺🇸 US 🇨🇦 CA	Special Tec AA 5W-301 Liter	View on Amazon
LIQUI MOLY Fits: 6.2L V8 Supercharged	20226	🇺🇸 US 🇨🇦 CA	Molygen New Generation 5W-301 Liter	View on Amazon
LIQUI MOLY Fits: 6.2L V8 Supercharged	20138	🇺🇸 US 🇨🇦 CA	Special Tec AA 5W-305 Liter	View on Amazon
LUCAS OIL Fits: 6.2L V8 Supercharged	10049	🇺🇸 US 🇨🇦 CA	FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt	View on Amazon
LUCAS OIL Fits: 6.2L V8 Supercharged	18005	🇺🇸 US 🇨🇦 CA	Full Synthetic Motor Oil SAE 5W-306 Gallon	View on Amazon
MOBIL Fits: 6.2L V8 Supercharged	112627	🇺🇸 US 🇨🇦 CA	Extended Performance 5W-30Mobil 1 Extended Performance Fitment notes — MOBIL 112627 Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart	View on Amazon
PENTOSIN Fits: 6.2L V8 Supercharged	8044214	🇺🇸 US 🇨🇦 CA	5W-30-Pentospeed-DEXOS1 GEN31 Liter Fitment notes — PENTOSIN 8044214 5W-30-Pentospeed-DEXOS1 GEN31 Liter For Temperature Above -20 F	View on Amazon
PENTOSIN Fits: 6.2L V8 Supercharged	8044216	🇺🇸 US 🇨🇦 CA	5W-30-Pentospeed-DEXOS1 GEN35 Liters Fitment notes — PENTOSIN 8044216 5W-30-Pentospeed-DEXOS1 GEN35 Liters For Temperature Above -20 F	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	891678	🇺🇸 US 🇨🇦 CA	Extended Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	891670	🇺🇸 US 🇨🇦 CA	Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	881164	🇺🇸 US 🇨🇦 CA	Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon

High Mileage (>75,000 Miles)

Brand	Part Number	Markets	Notes	Buy
MOBIL Fits: 6.2L V8 Supercharged	123842	🇺🇸 US 🇨🇦 CA	Extended Performance High Mileage 5W-30Synthetic Fitment notes — MOBIL 123842 Extended Performance High Mileage 5W-30Synthetic1 Quart	View on Amazon
MOBIL Fits: 6.2L V8 Supercharged	103767	🇺🇸 US 🇨🇦 CA	High Mileage 5W-30Mobil 1 High Mileage Fitment notes — MOBIL 103767 High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	VV179	🇺🇸 US 🇨🇦 CA	Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	881169	🇺🇸 US 🇨🇦 CA	Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart	View on Amazon

Synthetic Blend

Brand	Part Number	Markets	Notes	Buy
VALVOLINE Popular Fits: 6.2L V8 Supercharged	797975	🇺🇸 US 🇨🇦 CA	Daily Protection SAE 5W-30 Synthetic Blend1 Quart	View on Amazon
VALVOLINE Fits: 6.2L V8 Supercharged	881159	🇺🇸 US 🇨🇦 CA	Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart	View on Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12607900	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Cooler Adapter Seal

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: 6.2L V8 Supercharged	73254	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	15203889	🇺🇸 US 🇨🇦 CA	Configuration: ONE Piece	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12613165	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Oil Cooler Adapter. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Cooler Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	72435	🇺🇸 US 🇨🇦 CA	with Oval Port	View on Amazon
FEL-PRO Popular Fits: 6.2L V8 Supercharged	72462	🇺🇸 US 🇨🇦 CA	Center Tubewith Dual Round Port	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	B31872	🇺🇸 US 🇨🇦 CA	Engine Oil Cooler GasketMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE B31872 Engine Oil Cooler GasketMetal with Molded Rubber Dual round port	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AOM6016	🇺🇸 US 🇨🇦 CA	Oval Port	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AOM6015	🇺🇸 US 🇨🇦 CA	Dual round port	View on Amazon
DORMAN Fits: 6.2L V8 Supercharged	66219	🇺🇸 US 🇨🇦 CA	Seals Two Pipes	View on Amazon
DORMAN Fits: 6.2L V8 Supercharged	66218	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.2L V8 Supercharged	853210	🇺🇸 US 🇨🇦 CA	Material: Metaloseal	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	B31867	🇺🇸 US 🇨🇦 CA	Beaded Steel Fitment notes — MAHLE / CLEVITE B31867 Beaded Steel Oval Port	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	711350900	🇺🇸 US 🇨🇦 CA	Replaces OE Part Number(s) 12593252, 12611384with Oval Ports	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	711351000	🇺🇸 US 🇨🇦 CA	CenterReplaces OE Part Number(s) 12561710 Fitment notes — VICTOR REINZ 711351000 CenterReplaces OE Part Number(s) 12561710with Dual Round Ports	View on Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Cooler Line Connector

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	11588716	🇺🇸 US 🇨🇦 CA	Plant Operation (JJB)M6X1X40 Fitment notes — GM GENUINE 11588716 Plant Operation (JJB)M6X1X40Bolt Only	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12614837	🇺🇸 US 🇨🇦 CA	1/2 Female, with 3/4 -16 UNF Thread	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12614836	🇺🇸 US 🇨🇦 CA	3/8 Female, with 3/4 -16 UNF Thread	View on Amazon

This table covers the harness connectors at the Oil Cooler Line. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Cooler Mounting Kit

Brand	Part Number	Markets	Notes	Buy
HAYDEN Fits: 6.2L V8 Supercharged	238	🇺🇸 US 🇨🇦 CA	Rubber Block Mounting Kit for Heavy Duty Oil Cooler	View on Amazon
HAYDEN Fits: 6.2L V8 Supercharged	153	🇺🇸 US 🇨🇦 CA	Metal Mounting Bracket Kit for Heavy Duty Oil Cooler	View on Amazon

This table covers the Oil Cooler Mounting kits.

Oil Cooler Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	B17840	🇺🇸 US 🇨🇦 CA		View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	72435	🇺🇸 US 🇨🇦 CA	Oval Port	View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	72462	🇺🇸 US 🇨🇦 CA	with Dual Round PortCenter Tube	View on Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Dipstick / Tube

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12584737	🇺🇸 US 🇨🇦 CA	Dipstick Only Fitment notes — GM GENUINE 12584737 Dipstick Only INCLUDES HANDLE,SEAL	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12584738	🇺🇸 US 🇨🇦 CA	Tube OnlyIncludes Mounting Bracket, Seal	View on Amazon

This table covers the Oil Dipstick tubes.

Oil Dipstick / Tube Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	584210	🇺🇸 US 🇨🇦 CA	Inner Diameter [MM]: 6,07	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	73889	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	24504031	🇺🇸 US 🇨🇦 CA	Fits Single UseIndicator Fitment notes — GM GENUINE 24504031 Fits: Single UseIndicator6.07 ID1.78 Diameteror TubeSingle Use6.07 ID1.78 Diameter	View on Amazon

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 6.2L V8 Supercharged	090175	🇺🇸 US 🇨🇦 CA	Integrated GasketM12 x 1.75 Thread	View on Amazon

Twist Drain

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 6.2L V8 Supercharged	092018	🇺🇸 US 🇨🇦 CA	Thread Size: M12-1.75Twist Style	View on Amazon

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: 6.2L V8 Supercharged	090034	🇺🇸 US 🇨🇦 CA	M12 x 1.75 Thread Fitment notes — DORMAN 090034 M12 x 1.75 Thread Gasket Included	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	823400	🇺🇸 US 🇨🇦 CA	with Seal RingBolt Head-/Nut Design: Male Hex Fitment notes — ELRING 823400 with Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,75x17	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	11562588	🇺🇸 US 🇨🇦 CA	with SealExc. Magnet Fitment notes — GM GENUINE 11562588 with SealExc. Magnetwith Hex HeadM12X1.75X25	View on Amazon
VAICO Fits: 6.2L V8 Supercharged	V400755	🇺🇸 US 🇨🇦 CA	Thread Size: M 12 X 1,75Includes Gasket	View on Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	70820	🇺🇸 US 🇨🇦 CA	Rubber Fitment notes — FEL-PRO 70820 Rubber Dished Washer0.410 (in) Inside Diameter x 0.820 (in) Outside Diameter	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12616850	🇺🇸 US 🇨🇦 CA	6 speed Automatic trans.Plant Operation (JJB) Fitment notes — GM GENUINE 12616850 6 speed Automatic trans.Plant Operation (JJB)Diameter 19.39	View on Amazon
DORMAN Fits: 6.2L V8 Supercharged	97119	🇺🇸 US 🇨🇦 CA	Rubber GasketRubber Fitment notes — DORMAN 97119 Rubber GasketRubberSizeM12, 7/16"Inside Dia: 0.448"/11.38mmOutside Dia.: 0.811"/20.60mmThickness: 0.102"/2.59mm Inside Diameter (In): 0.448Outside Diameter (In): 0.811	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	056130	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 Fitment notes — ELRING 056130 Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8Shape: O-Ring	View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	097119	🇺🇸 US 🇨🇦 CA	ID: 0.448"RUBBER GASKET	View on Amazon
VAICO Fits: 6.2L V8 Supercharged	V401110	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand	Part Number	Markets	Notes	Buy
ACDELCO Fits: 6.2L V8 Supercharged	FC215	🇺🇸 US 🇨🇦 CA	GM Original Equipment Fitment notes — ACDELCO FC215 GM Original Equipment Non vented	View on Amazon
GATES Fits: 6.2L V8 Supercharged	31103	🇺🇸 US 🇨🇦 CA		View on Amazon
MOTORAD Fits: 6.2L V8 Supercharged	MO99	🇺🇸 US 🇨🇦 CA		View on Amazon
SKP Fits: 6.2L V8 Supercharged	SKMO99	🇺🇸 US 🇨🇦 CA	with Plastic cap	View on Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	592250	🇺🇸 US 🇨🇦 CA	SealMaterial: AEM (Ethylene Acrylate Rubber)	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	823620	🇺🇸 US 🇨🇦 CA	SealMaterial: HNBR (hydrogenated nitrile butadiene rubber)	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	73193	🇺🇸 US 🇨🇦 CA	Services OEM bonded Cap sealAftermarket Design Fitment notes — FEL-PRO 73193 Services OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	24100002	🇺🇸 US 🇨🇦 CA	Size # 32027.94MM Inner Diameter	View on Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Tube

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12609623	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Filler tubes.

Oil Filter

Economy

Brand	Part Number	Markets	Notes	Buy
FRAM Fits: 6.2L V8 Supercharged	FE10060	🇺🇸 US 🇨🇦 CA	Spin-OnTough Guard or Synthetic Endurance	View on Amazon
FVP Fits: 6.2L V8 Supercharged	R7060	🇺🇸 US 🇨🇦 CA		View on Amazon
PRO-TEC Fits: 6.2L V8 Supercharged	PXL57060	🇺🇸 US 🇨🇦 CA		View on Amazon
PUROLATOR Fits: 6.2L V8 Supercharged	PL12222	🇺🇸 US 🇨🇦 CA	Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Fitment notes — PUROLATOR PL12222 Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Synthetic Oil Application. Premium filter recommended	View on Amazon
VAICO Fits: 6.2L V8 Supercharged	V400978	🇺🇸 US 🇨🇦 CA	DURAGUARD (without TOP MOUNTED FILTER BYPASS VALVE)	View on Amazon
VARIOUS MFR Fits: 6.2L V8 Supercharged	PG2222	🇺🇸 US 🇨🇦 CA		View on Amazon

High Performance / Heavy Duty

Brand	Part Number	Markets	Notes	Buy
WIX Popular Fits: 6.2L V8 Supercharged	57060XP	🇺🇸 US 🇨🇦 CA	XP Extreme DutyBest for Synthetic Motor Oils Fitment notes — WIX 57060XP XP Extreme DutyBest for Synthetic Motor Oils Factory filled synthetic oil	View on Amazon
MOBIL Fits: 6.2L V8 Supercharged	M1113A	🇺🇸 US 🇨🇦 CA	Extended Performance	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ACDELCO Popular Fits: 6.2L V8 Supercharged	PF48	🇺🇸 US 🇨🇦 CA	GM Original EquipmentFilter Media Material: Enhanced Cellulose Fitment notes — ACDELCO PF48 GM Original EquipmentFilter Media Material: Enhanced Cellulose without Top Mounted Filter Bypass Valve, New E-Core Construction	View on Amazon
BOSCH Popular Fits: 6.2L V8 Supercharged	3334	🇺🇸 US 🇨🇦 CA	Premium Oil FilterConnection Size: M22X1.5	View on Amazon
WIX Popular Fits: 6.2L V8 Supercharged	57060	🇺🇸 US 🇨🇦 CA	Spin-On Lube Filter Fitment notes — WIX 57060 Spin-On Lube Filter Factory filled synthetic oil	View on Amazon
ACDELCO Fits: 6.2L V8 Supercharged	PF48B	🇺🇸 US 🇨🇦 CA	SilverWhite Shell	View on Amazon
DENSO Fits: 6.2L V8 Supercharged	1502020	🇺🇸 US 🇨🇦 CA	Engine Oil Filter or FTF Engine Oil Filter	View on Amazon
HASTINGS / BALDWIN Fits: 6.2L V8 Supercharged	LF613	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	OC614	🇺🇸 US 🇨🇦 CA	Spin-On Fitment notes — MAHLE / CLEVITE OC614 Spin-On Bypass pressure 14 PSI	View on Amazon
VARIOUS MFR Fits: 6.2L V8 Supercharged	PG2222EX	🇺🇸 US 🇨🇦 CA	Extended Life	View on Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12600225	🇺🇸 US 🇨🇦 CA	Threaded FittingM20XM22	View on Amazon

This table covers the Oil Filter adapters.

Oil Filter Gasket

Brand	Part Number	Markets	Notes	Buy
APEX Fits: 6.2L V8 Supercharged	AOM6015	🇺🇸 US 🇨🇦 CA		View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	72462	🇺🇸 US 🇨🇦 CA	Oil Filter Gasket or SealGasket Fitment notes — ULTRA-POWER 72462 Oil Filter Gasket or SealGasketCenter Tubewith Dual Round Port	View on Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter Housing Seal

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12610160	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Filter Remote Mounting Kit

Brand	Part Number	Markets	Notes	Buy
HAYDEN Fits: 6.2L V8 Supercharged	292	🇺🇸 US 🇨🇦 CA	Oil Filter Relocation Kit. Contains filter mount and engine adapter. Hose Not included.Only For Engines with 22x1.5 mm Filter Thread	View on Amazon

This table covers the Oil Filter Remote Mounting kits.

Oil Galley Plug

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12573460	🇺🇸 US 🇨🇦 CA	Includes O-Ring Fitment notes — GM GENUINE 12573460 Includes O-Ring Engine BlockSeal15.68mm Diameter	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	MOGP100	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8 Supercharged	MOGP100HP	🇺🇸 US 🇨🇦 CA	High PerformanceDouble O-Ring Design Fitment notes — MELLING MOGP100HP High PerformanceDouble O-Ring DesignBlack anodized billet 6061-T6 aluminum 2.54 inches Long	View on Amazon

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Level Sensor

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12603781	🇺🇸 US 🇨🇦 CA		View on Amazon
WELLS Fits: 6.2L V8 Supercharged	5S8223	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Oil Nozzle

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12601222	🇺🇸 US 🇨🇦 CA	Injector Spray NozzlePiston Nozzle	View on Amazon

This table covers the Oil nozzles.

Oil Pan

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12631828	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	795390	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12554990	🇺🇸 US 🇨🇦 CA	M6X1.0X136	View on Amazon

This table covers the Oil Pan bolts.

Oil Pan Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	OS30693R	🇺🇸 US 🇨🇦 CA	Permadry Molded Rubber	View on Amazon
ULTRA-POWER Popular Fits: 6.2L V8 Supercharged	OS30693R	🇺🇸 US 🇨🇦 CA	Molded Rubber Gasket(s) IncludedMolded Rubber	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AOP371	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.2L V8 Supercharged	947800	🇺🇸 US 🇨🇦 CA	Material: Ethylene Acrylic Elastomer (AEM)Number of Bolt Holes: 15	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3112612350	🇺🇸 US 🇨🇦 CA	Also Fits LS6. Does Not Fit LS7 and LS9	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3130693R	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12612350	🇺🇸 US 🇨🇦 CA	Bolt Hole Quantity: 17	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	OS32241	🇺🇸 US 🇨🇦 CA	Molded Rubber	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	101022301	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket Rivet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12558759	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pan Gasket rivets.

Oil Pressure Relief Valve Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	M29537	🇺🇸 US 🇨🇦 CA	Contains 5 Pieces Fitment notes — MELLING M29537 Contains 5 Pieces Fits: All GM LS Engine Oil Pumps	View on Amazon

This table covers the Oil Pressure Relief Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Pump

Economy

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.2L V8 Supercharged	EPK137	🇺🇸 US	'Pressure King' Value Line Pump Fitment notes — ENGINETECH EPK137 'Pressure King' Value Line Pump Engine VIN code P	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SKPM365	🇺🇸 US 🇨🇦 CA		View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	M365	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assy	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	10355HV	🇺🇸 US 🇨🇦 CA	High PerformanceHigh Volume and High Pressure +10 PSI Higher Pressure High Performance Oil Pump Fitment notes — MELLING 10355HV High PerformanceHigh Volume and High Pressure +10 PSI Higher Pressure High Performance Oil PumpNo Warranty	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	10355	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 10355 High PerformanceNo Warranty Stock Volume +10 PSI Higher Pressure Over Stock Pressure, High Performance Oil Pump	View on Amazon

High Volume / Pressure

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	M365HV	🇺🇸 US 🇨🇦 CA	20% Additional Volume Over Stock Oil PumpDoes Not Include Oil Pickup Tube Assembly	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12710304	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	M365	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assembly	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	EP365	🇺🇸 US	Housing Material: Aluminum Fitment notes — ENGINETECH EP365 Housing Material: Aluminum Engine VIN Code 3,7,B,M,PThe OE pump has a cast hole in-between the mounting bolt holes3,7,B,M,PValoresThe OE bomba tiene a cast agujero In-between The mounting tornillo	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	22443669	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assembly	View on Amazon
VAICO Fits: 6.2L V8 Supercharged	V510666	🇺🇸 US 🇨🇦 CA		View on Amazon

Brand	Part Number	Markets	Notes	Buy
SEALED POWER Fits: 6.2L V8 Supercharged	22443711HV	🇺🇸 US 🇨🇦 CA	High Volume	View on Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Cover Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	795390	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pump Cover bolts.

Oil Pump Drive Gear

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 6.2L V8 Supercharged	9228	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9228 High Performance Replacement Oil Pump Drive Nose / Gear	View on Amazon

This table covers the Oil Pump Drive gears.

Oil Pump Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	157030	🇺🇸 US 🇨🇦 CA	Suction Pipe	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	875400	🇺🇸 US 🇨🇦 CA	Material: FVMQ fluorosilicone rubber Fitment notes — ELRING 875400 Material: FVMQ fluorosilicone rubber Suction Pipe	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12557752	🇺🇸 US 🇨🇦 CA	Blue	View on Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube / Screen

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12621299	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the pickup tubes and screens that feed the oil pump.

Oil Pump Pickup Tube Bracket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	M29500	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING M29500 High PerformanceNo Warranty Uses The Unused Bolt Hole In The Oil PumpDoes Not Fit Pickup Tube with Welded Flange GM Part Number 12608593Does Not Fit Pickup Tubes with Two Bolt Hole Flanges	View on Amazon

This table covers the brackets that mount the Oil Pump Pickup Tube. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Oil Pump Pickup Tube O-Ring

Brand	Part Number	Markets	Notes	Buy
APEX Fits: 6.2L V8 Supercharged	AOM6014	🇺🇸 US 🇨🇦 CA	Inlet Tube	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	72401	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	B32790	🇺🇸 US 🇨🇦 CA	Oil Pump Pick-up Tube GasketMolded Rubber Fitment notes — MAHLE / CLEVITE B32790 Oil Pump Pick-up Tube GasketMolded Rubber O-Ring Type	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	411041600	🇺🇸 US 🇨🇦 CA	Inlet Tube	View on Amazon

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Pump Seal

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: 6.2L V8 Supercharged	3112584922	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Strainer Gasket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	M29517	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Sump Windage Tray

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12611129	🇺🇸 US 🇨🇦 CA	Mount Hole Diameter (In): 0.452 IN	View on Amazon

This table covers the windage trays that keep crank windage out of the oil sump.

Piston

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	19180413	🇺🇸 US 🇨🇦 CA	Standard	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	19207290	🇺🇸 US 🇨🇦 CA	0.5MM O.S.	View on Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Pin Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12569638	🇺🇸 US 🇨🇦 CA	Used with Federal Mogul Pistons	View on Amazon

This table covers the Piston Pin retainers.

Piston Ring

Premium

Brand	Part Number	Markets	Notes	Buy
SEALED POWER Popular Fits: 6.2L V8 Supercharged	E997K	🇺🇸 US 🇨🇦 CA	PremiumRing Groove Widths: 1.5mm, 1.5mm, 2.5mm Fitment notes — SEALED POWER E997K PremiumRing Groove Widths: 1.5mm, 1.5mm, 2.5mmSetMoly Steel Top RingDuctile Second Ring	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	S40728	🇺🇸 US	Steel Top PremiumSet Fitment notes — ENGINETECH S40728 Steel Top PremiumSetMoly Coated 1.5mm / 1.2mm / 2.0mm (Size: Standard)	View on Amazon
HASTINGS MANUFACTURING Fits: 6.2L V8 Supercharged	2M5275	🇺🇸 US 🇨🇦 CA	Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly Fitment notes — HASTINGS MANUFACTURING 2M5275 Plasma Moly Top RingTop Ring Surface Treatment: Plasma MolyFull Setfor 2 Ring Piston (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	42066CP	🇺🇸 US 🇨🇦 CA	PremiumMaterial Carbon Steel / Ductile Iron / Stainless Steel Fitment notes — MAHLE / CLEVITE 42066CP PremiumMaterial Carbon Steel / Ductile Iron / Stainless SteelSetAxial Height: 1.5mm / 1.2mm / 2.0mmFacing: Plasma-Moly / Chrome Shallow Groove	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	19180423	🇺🇸 US 🇨🇦 CA	STD SIZE	View on Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	500704	🇺🇸 US 🇨🇦 CA	High PerformanceChrome Moly Steel Fitment notes — MELLING 500704 High PerformanceChrome Moly SteelNo Warranty	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	10238852	🇺🇸 US 🇨🇦 CA	Material: 1010 Steel	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	MPR614	🇺🇸 US 🇨🇦 CA		View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	746614	🇺🇸 US 🇨🇦 CA	7.397 Length	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1901537	🇺🇸 US 🇨🇦 CA	Intake and Exhaust7.397 Length Fitment notes — SBI 1901537 Intake and Exhaust7.397 Length312X075 Diameter/Wall	View on Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Push Rod Guide Plate

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	MGP114HP	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING MGP114HP High Performance 5/16" ThickSold as Set of 8	View on Amazon

This table covers the Push Rod Guide plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Rocker Arm

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12696105	🇺🇸 US 🇨🇦 CA	Intake	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	MR1341	🇺🇸 US 🇨🇦 CA	Exhaust	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12681275	🇺🇸 US 🇨🇦 CA	ARM,VLV RKR EXH, QTY=8	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	MR1342	🇺🇸 US 🇨🇦 CA	Intake	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	MRK100HP	🇺🇸 US 🇨🇦 CA	KitHigh Performance Fitment notes — MELLING MRK100HP KitHigh Performance Use with trunion install Kit Mtik-100	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1801337	🇺🇸 US 🇨🇦 CA	ExhaustRoller Pivot Assy. Fitment notes — SBI 1801337 ExhaustRoller Pivot Assy.Note: Captive Bearing Design with High Grade Steel Trunion	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1801336	🇺🇸 US 🇨🇦 CA	IntakeRoller Pivot Assy. Fitment notes — SBI 1801336 IntakeRoller Pivot Assy.Note: OffsetUse with Large Rectangular Intake PortsCaptive Bearing Design with High Grade Steel Trunion	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SKMR1342	🇺🇸 US 🇨🇦 CA	IntakeOffset Fitment notes — SKP SKMR1342 IntakeOffsetCaptive Bearing Design	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SKMR1341	🇺🇸 US 🇨🇦 CA	ExhaustCaptive Bearing Design Fitment notes — SKP SKMR1341 ExhaustCaptive Bearing DesignCentered	View on Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12560961	🇺🇸 US 🇨🇦 CA	M8X1.25X52.5	View on Amazon

This table covers the Rocker Arm bolts.

Rocker Arm Shaft Support

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12600936	🇺🇸 US 🇨🇦 CA	Shaft Diameter (In): 0.7358267717 In	View on Amazon

This table covers the Rocker Arm Shaft supports.

Rocker Arm Stud

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8 Supercharged	MRDS100HP	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING MRDS100HP High PerformanceNo Warranty 3/8-24 Rocker Nut Thread8mm-1.25X2.300 Base Thread	View on Amazon

This table covers the Rocker Arm studs.

Supercharger

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12670278	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the superchargers that compress intake air.

Supercharger Bypass Solenoid / Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12602160	🇺🇸 US 🇨🇦 CA	Use with Mating Connector 88988501	View on Amazon

This table covers the Supercharger Bypass Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Supercharger Bypass Solenoid / Valve Actuator

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	19180859	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Supercharger Bypass Solenoid / Valve actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Supercharger Gasket

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12608993	🇺🇸 US 🇨🇦 CA	Water	View on Amazon

This table covers the gaskets that seal the Supercharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Supercharger Pressure Sensor

Economy

Brand	Part Number	Markets	Notes	Buy
NTK Fits: 6.2L V8 Supercharged	MA0205	🇺🇸 US 🇨🇦 CA	Inlet	View on Amazon
NTK Fits: 6.2L V8 Supercharged	MA0048	🇺🇸 US 🇨🇦 CA	Outlet	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	2134681	🇺🇸 US 🇨🇦 CA	InletUse with Connector PT2798 with Leads Fitment notes — GM GENUINE 2134681 InletUse with Connector PT2798 with LeadsMates with Connector 13585850 with Leads	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	2134760	🇺🇸 US 🇨🇦 CA	Programming Required: YES Fitment notes — GM GENUINE 2134760 Programming Required: YES Outlet	View on Amazon
WELLS Fits: 6.2L V8 Supercharged	5S8025	🇺🇸 US 🇨🇦 CA	InletFor Mating connector Use 1P2218	View on Amazon
WELLS Fits: 6.2L V8 Supercharged	5S12239	🇺🇸 US 🇨🇦 CA	Connector Gender: Female Fitment notes — WELLS 5S12239 Connector Gender: Female Outlet	View on Amazon

This table covers the Supercharger pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.

Timing Cam Sprocket

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	S894	🇺🇸 US 🇨🇦 CA	1 Bolt, 4 Sensor, 58x Reluctor	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	S916	🇺🇸 US 🇨🇦 CA	Optional 3 Bolt4 Sensor Hub Fitment notes — MELLING S916 Optional 3 Bolt4 Sensor Hub58x ReluctorUse When Upgrading To A 3 Bolt Camshaft	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	S894T	🇺🇸 US 🇨🇦 CA	with 1 Bolt, 4 Sensor Hub	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12591689	🇺🇸 US 🇨🇦 CA	with Provision For One (1) 16MM Attachment Bolt	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZSS894T	🇺🇸 US 🇨🇦 CA		View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	G55894	🇺🇸 US 🇨🇦 CA	1 Bolt4 Sensor Hub Fitment notes — PREFERRED COMPONENTS INC G55894 1 Bolt4 Sensor Hub58x Reluctor	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	G56002	🇺🇸 US 🇨🇦 CA	Use When Upgrading To A 3 Bolt Camshaft4 Sensor Hub Fitment notes — PREFERRED COMPONENTS INC G56002 Use When Upgrading To A 3 Bolt Camshaft4 Sensor Hub58x Reluctor	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	S894	🇺🇸 US 🇨🇦 CA	CAM	View on Amazon

This table covers the Timing Cam sprockets.

Timing Chain

High Performance

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 6.2L V8 Supercharged	9304	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9304 High Performance Center60 Links, Single Roller	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	9303	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9303 High Performance CenterReplacement High Performance "Z" Chain, 60 Links, Single Roller	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	9302	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — CLOYES 9302 High Performance Center62 Links, Single Roller	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: 6.2L V8 Supercharged	94205	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	3SRH60	🇺🇸 US 🇨🇦 CA		View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93035	🇺🇸 US 🇨🇦 CA	Centerwith Single Roller Chain Fitment notes — CLOYES 93035 Centerwith Single Roller Chain0.005 in Undersize	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12646387	🇺🇸 US 🇨🇦 CA		View on Amazon
INA Fits: 6.2L V8 Supercharged	ZC94205	🇺🇸 US 🇨🇦 CA	Timing Chain Type: Simplex	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	C1360	🇺🇸 US 🇨🇦 CA		View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	3SRH60	🇺🇸 US 🇨🇦 CA	Chain	View on Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand	Part Number	Markets	Notes	Buy
S.A. GEAR Popular Fits: 6.2L V8 Supercharged	76230	🇺🇸 US 🇨🇦 CA	Includes Cam Sprocket, Chain, Crank Sprocket, Tensioner	View on Amazon
GATES Fits: 6.2L V8 Supercharged	CHK138	🇺🇸 US 🇨🇦 CA	Includes Timing Chain, Tensioner, Sprocket Fitment notes — GATES CHK138 Includes Timing Chain, Tensioner, Sprocket Excludes VVT Sprockets & Primary Sprockets	View on Amazon
GATES Fits: 6.2L V8 Supercharged	CHK137	🇺🇸 US 🇨🇦 CA	Includes Timing Chain, Tensioner, 2 SprocketsPrimary Sprockets Only	View on Amazon
ITM ENGINE COMPONENTS Fits: 6.2L V8 Supercharged	05394302	🇺🇸 US 🇨🇦 CA		View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	TS33227	🇺🇸 US 🇨🇦 CA	Timing Chain Tensioner Not Included Fitment notes — PREFERRED COMPONENTS INC TS33227 Timing Chain Tensioner Not Included 1 Bolt Camshaft Sprocket	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	TS13227	🇺🇸 US 🇨🇦 CA	Timing Chain Tensioner Included Fitment notes — PREFERRED COMPONENTS INC TS13227 Timing Chain Tensioner Included 1 Bolt Camshaft Sprocket	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	73164	🇺🇸 US 🇨🇦 CA	Includes Cam Sprocket, Chain, Crank Sprocket	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	76230T	🇺🇸 US 🇨🇦 CA	Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Fitment notes — S.A. GEAR 76230T Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Does Not Include Cam Sprocket	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	78935T9	🇺🇸 US 🇨🇦 CA	Includes Chain Fitment notes — S.A. GEAR 78935T9 Includes Chain Single Roller 250	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	78535T9R	🇺🇸 US 🇨🇦 CA	Billet Steel Roller .250Includes Chain	View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	94205SA	🇺🇸 US 🇨🇦 CA	Sprockets Included	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: 6.2L V8 Supercharged	93673TX9Z	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 9 Keyways Fitment notes — CLOYES 93673TX9Z Race BilletContains Crank Sprocket with 9 Keyways with 1 Bolt, 4 Sensor Hubwith "Z" Racing Chain	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TX9ZR	🇺🇸 US 🇨🇦 CA	Race Billet, with "Z" Chain Fitment notes — CLOYES 93673TX9ZR Race Billet, with "Z" Chain with 1 Bolt, 4 Sensor Hubwith .390" Raised Camshaft Engine	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TX3Z	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 3 Keyways Fitment notes — CLOYES 93673TX3Z Race BilletContains Crank Sprocket with 3 Keyways with 1 Bolt, 4 Sensor Hubwith "Z" Racing Chain	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TX3ZR	🇺🇸 US 🇨🇦 CA	Race Billet Fitment notes — CLOYES 93673TX3ZR Race Billet with 1 Bolt, 4 Sensor Hubwith .390" Raised Camshaft Engine	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	48565T9	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 48565T9 High PerformanceNo Warranty .250 Inch Seamless Double Roller Timing ChainStainless Steel 1 Bolt Camshaft Sprocket 4 Sensor 58x ReluctorHeat Treated Billet Steel 9 Keyway Adjustable Crankshaft SprocketOne Piece Torrington Thrust BearingCenter Distance 4.890 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	48570T9	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 48570T9 High PerformanceNo Warranty .250 Inch Seamless Single Roller Timing ChainStainless Steel 3 Bolt Camshaft Sprocket 4 Sensor 58x ReluctorHeat Treated Billet Steel 9 Keyway Adjustable Crankshaft SprocketOne Piece Torrington Thrust BearingCenter Distance 4.890 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	48564T9	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 48564T9 High PerformanceNo Warranty .250 Inch Seamless Single Roller Timing ChainStainless Steel 1 Bolt Camshaft Sprocket 4 Sensor 58x ReluctorHeat Treated Billet Steel 9 Keyway Adjustable Crankshaft SprocketOne Piece Torrington Thrust BearingCenter Distance 4.890 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	48562T9	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 48562T9 High PerformanceNo Warranty .250 Inch Seamless Double Roller Timing ChainStainless Steel 3 Bolt Camshaft Sprocket 4 Sensor 58x ReluctorHeat Treated Billet Steel 9 Keyway Adjustable Crankshaft SprocketOne Piece Torrington Thrust BearingCenter Distance 4.890 Inches	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: 6.2L V8 Supercharged	94205SB	🇺🇸 US 🇨🇦 CA	Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket Fitment notes — CLOYES 94205SB Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket without Camshaft Gear	View on Amazon
CLOYES Popular Fits: 6.2L V8 Supercharged	94205SA	🇺🇸 US 🇨🇦 CA	Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket, Camshaft Sprocket	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	33SRH60SF	🇺🇸 US 🇨🇦 CA	Timing Chain Tensioner Not Included Fitment notes — MELLING 33SRH60SF Timing Chain Tensioner Not Included Optional 3 Bolt Camshaft SprocketRequired When Using 3 Bolt Camshafts	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	33SRH60SB	🇺🇸 US 🇨🇦 CA	Includes Chain Tensioner Fitment notes — MELLING 33SRH60SB Includes Chain Tensioner 1 Bolt Camshaft Sprocket	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	33SRH60SG	🇺🇸 US 🇨🇦 CA	Optional 3 Bolt Camshaft SprocketRequired When Using 3 Bolt Camshafts	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	C3227	🇺🇸 US 🇨🇦 CA	Timing SetSet Contains: Timing Chain, Crankshaft Sprocket, Camshaft Sprocket Fitment notes — CLOYES C3227 Timing SetSet Contains: Timing Chain, Crankshaft Sprocket, Camshaft Sprocket with Single Roller Chain	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TX3	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 3 Keyways Fitment notes — CLOYES 93673TX3 Race BilletContains Crank Sprocket with 3 Keyways with 1 Bolt, 4 Sensor Hubwith Single Roller Chain	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TX9	🇺🇸 US 🇨🇦 CA	Race BilletContains Crank Sprocket with 9 Keyways Fitment notes — CLOYES 93673TX9 Race BilletContains Crank Sprocket with 9 Keyways with 1 Bolt, 4 Sensor Hubwith Single Roller Chain	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	93673TE	🇺🇸 US 🇨🇦 CA	Variable Valve Timing Components Not Included Fitment notes — CLOYES 93673TE Variable Valve Timing Components Not Included without Camshaft GearTensioner Elimination Kit	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZCC3227	🇺🇸 US 🇨🇦 CA	Includes 1 Cam Sprocket, 1 Chain, 1 Crank Sprocket	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZC94205SB	🇺🇸 US 🇨🇦 CA	Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Fitment notes — INA ZC94205SB Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Does not include Camshaft Sprocket Option	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZC94205SA	🇺🇸 US 🇨🇦 CA	Includes 1 Cam Sprocket, 1 Chain, 1 Crank Sprocket, 1 Tensioner	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZC93673TX9	🇺🇸 US 🇨🇦 CA	Includes 1 Chain, 1 Crank Sprocket, 1 Cam Sprocket, 1 Single Roller 250	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZC78535T9R	🇺🇸 US 🇨🇦 CA	Kit Contains 1 Chain, 2 Gaskets, 1 Crank Sprocket, 1 Cam Sprocket, 1 Oil Pump Sprocket Fitment notes — INA ZC78535T9R Kit Contains 1 Chain, 2 Gaskets, 1 Crank Sprocket, 1 Cam Sprocket, 1 Oil Pump Sprocket Double Roller .250with 9 Keys	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	33SRH60S	🇺🇸 US 🇨🇦 CA	Timing Chain Tensioner Not Included Fitment notes — MELLING 33SRH60S Timing Chain Tensioner Not Included 1 Bolt Camshaft Sprocket	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	TOPK1003	🇺🇸 US 🇨🇦 CA	Includes Chain Tensioner and Oil Pump Fitment notes — MELLING TOPK1003 Includes Chain Tensioner and Oil Pump 1 Bolt Camshaft Sprocket	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	TOPK1003HV	🇺🇸 US 🇨🇦 CA	Includes Chain Tensioner, M365HV High Volume Oil Pump20% Additional Volume Over Stock Oil Pump Fitment notes — MELLING TOPK1003HV Includes Chain Tensioner, M365HV High Volume Oil Pump20% Additional Volume Over Stock Oil Pump 1 Bolt Camshaft Sprocket	View on Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Cover Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	B81070	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Chain Tensioner

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	BT5490	🇺🇸 US 🇨🇦 CA		View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	95490	🇺🇸 US 🇨🇦 CA	Inner	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	TT5490	🇺🇸 US	Tensioner/guide assembly	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12626407	🇺🇸 US 🇨🇦 CA	Kit	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	T66092	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12600326	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
PIONEER Fits: 6.2L V8 Supercharged	500323RSH	🇺🇸 US 🇨🇦 CA	Rear Seal Housing	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK81068	🇺🇸 US 🇨🇦 CA	with 10AN Turbo Oil Drain Fitting	View on Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Popular Fits: 6.2L V8 Supercharged	948280	🇺🇸 US 🇨🇦 CA		View on Amazon
SKP Popular Fits: 6.2L V8 Supercharged	SKTCS45993	🇺🇸 US 🇨🇦 CA	Gasket Kit Fitment notes — SKP SKTCS45993 Gasket Kit Timing Cover Gasket, Water Pump Gaskets, and Seal	View on Amazon
APEX Fits: 6.2L V8 Supercharged	ATC3710	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.2L V8 Supercharged	231390	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3112633904	🇺🇸 US 🇨🇦 CA	Also Fits LS6 Engine	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3111062	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12735382	🇺🇸 US 🇨🇦 CA	Crankshaft Seal Included: No	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	JV5022	🇺🇸 US 🇨🇦 CA	Set Fitment notes — MAHLE / CLEVITE JV5022 Set Requires Oil Pan Set	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK12633904	🇺🇸 US 🇨🇦 CA	Gasket Only Fitment notes — SKP SK12633904 Gasket Only Timing Cover Gasket Only	View on Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
SCHAEFFLER Fits: 6.2L V8 Supercharged	SR3913	🇺🇸 US 🇨🇦 CA	22.99 mm Width62 mm Outside Diameter Fitment notes — SCHAEFFLER SR3913 22.99 mm Width62 mm Outside Diameter54.99 mm Inside Diameter	View on Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand	Part Number	Markets	Notes	Buy
SKF Fits: 6.2L V8 Supercharged	21605	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand	Part Number	Markets	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12556582	🇺🇸 US 🇨🇦 CA	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	S827	🇺🇸 US 🇨🇦 CA	View on Amazon
CLOYES Fits: 6.2L V8 Supercharged	S827	🇺🇸 US 🇨🇦 CA	View on Amazon
INA Fits: 6.2L V8 Supercharged	ZSS827	🇺🇸 US 🇨🇦 CA	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 Supercharged	G55827	🇺🇸 US 🇨🇦 CA	View on Amazon
S.A. GEAR Fits: 6.2L V8 Supercharged	S827	🇺🇸 US 🇨🇦 CA	View on Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Valley Pan Cover

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: 6.2L V8 Supercharged	3112610141	🇺🇸 US 🇨🇦 CA	Fits 5.3L Engines	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12599296	🇺🇸 US 🇨🇦 CA	Includes BoltsMount Hole Diameter (In): 0.363 IN Fitment notes — GM GENUINE 12599296 Includes BoltsMount Hole Diameter (In): 0.363 IN Seals, Baffle, Tube, Cap	View on Amazon

This table covers the Valley Pan covers.

Valve Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12637686	🇺🇸 US 🇨🇦 CA	RightIncludes Cover, Gasket, 3 Ignition Coils, Bolts, Baffle, Fitting, Cap	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12637688	🇺🇸 US 🇨🇦 CA	LeftIncludes Cover, Gasket, 3 Ignition Coils, Bolts, Baffle, Fitting, Cap	View on Amazon
AUTOTECNICA Fits: 6.2L V8 Supercharged	GM1423099R	🇺🇸 US 🇨🇦 CA	Ignition coils Not included Fitment notes — AUTOTECNICA GM1423099R Ignition coils Not included Right	View on Amazon
AUTOTECNICA Fits: 6.2L V8 Supercharged	GM1423101R	🇺🇸 US 🇨🇦 CA	Ignition coils Not included Fitment notes — AUTOTECNICA GM1423101R Ignition coils Not included Left	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK12637686	🇺🇸 US 🇨🇦 CA	Right	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK12637688	🇺🇸 US 🇨🇦 CA	Left	View on Amazon

This table covers the Valve covers.

Valve Cover Bolt / Screw

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.2L V8 Supercharged	12577215	🇺🇸 US 🇨🇦 CA	with Grommet,SleeveM6.0X1.0	View on Amazon

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.

Valve Cover Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	VS50504R	🇺🇸 US 🇨🇦 CA	Permadry RubberValve Cover Grommets Not Included	View on Amazon
FEL-PRO Popular Fits: 6.2L V8 Supercharged	VS50504R1	🇺🇸 US 🇨🇦 CA	Permadry Molded RubberIncludes Valve Cover Grommets	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	VS50250A	🇺🇸 US 🇨🇦 CA	SetMolded Rubber Fitment notes — MAHLE / CLEVITE VS50250A SetMolded RubberIncludes Valve Cover Grommets	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AVC371	🇺🇸 US 🇨🇦 CA	Does Not Include Grommets	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AVC371S	🇺🇸 US 🇨🇦 CA	Includes Grommets	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	876270	🇺🇸 US 🇨🇦 CA	Material: Polyacrylate Rubber (ACM)	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	838210	🇺🇸 US 🇨🇦 CA	Material: Multiple	View on Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged	3112637683	🇺🇸 US 🇨🇦 CA	Except 1997-1998 with Perimeter Bolts	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12637683	🇺🇸 US 🇨🇦 CA	Sold Individually	View on Amazon
SKP Fits: 6.2L V8 Supercharged	SK615212	🇺🇸 US 🇨🇦 CA		View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	151066301	🇺🇸 US 🇨🇦 CA	SetValve Cover Grommets Not Included	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	151041601	🇺🇸 US 🇨🇦 CA	SetIncludes Grommets Fitment notes — VICTOR REINZ 151041601 SetIncludes Grommets Grommets Included	View on Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	GS33466	🇺🇸 US 🇨🇦 CA	KitSet Fitment notes — MAHLE / CLEVITE GS33466 KitSetMolded Rubber	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AES308	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	875380	🇺🇸 US 🇨🇦 CA	Material: MVQ (silicone rubber)	View on Amazon
FEL-PRO Fits: 6.2L V8 Supercharged	ES72233	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	151014201	🇺🇸 US 🇨🇦 CA	Set	View on Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.2L V8 Supercharged	GD3053	🇺🇸 US	Iron Fitment notes — ENGINETECH GD3053 Iron Engine VIN code P,R,TINT& EXH.3154 X .5000 X 2.115"Spiral ID	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	303053	🇺🇸 US 🇨🇦 CA	2.115 OAL. 0.3154 I.D. 0.500 O.D.	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1403053	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.3154 I.D. Fitment notes — SBI 1403053 Intake and Exhaust0.3154 I.D.0.5000 O.D.2.115 Length1-SR Type+2 O/S Available (140-3053+2)	View on Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Economy

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged	2131738	🇺🇸 US 🇨🇦 CA	Hydraulic Fitment notes — MAHLE / CLEVITE 2131738 Hydraulic Fits: with rolleror Lifter Type: Hydraulic Roller	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.2L V8 Supercharged	L2281	🇺🇸 US	HydraulicRoller Follower Fitment notes — ENGINETECH L2281 HydraulicRoller Follower Engine VIN code P,R,T	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	JB2079	🇺🇸 US 🇨🇦 CA	Hydraulic Fitment notes — MELLING JB2079 Hydraulic Non Active Fuel Management Engine	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	LG2281K	🇺🇸 US	KitContains L2281-16, EG365-4 Fitment notes — ENGINETECH LG2281K KitContains L2281-16, EG365-4Roller FollowerHydraulic VIN code P,R,T Contains L2281-16, EG365-4	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12698945	🇺🇸 US 🇨🇦 CA	LIFTERS ONLYNON-ACTIVE FUEL MANAGEMENT LIFTER	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	362148	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Fitment notes — QUALCAST 362148 Hydraulic Roller Hydraulic Roller Type	View on Amazon
SBI Fits: 6.2L V8 Supercharged	VL559	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.842 Body Diameter Fitment notes — SBI VL559 Intake and Exhaust0.842 Body Diameter2.600 LengthHydraulic Roller TypeOil Hole is Positioned In Line with Roller Pin.Non-Active Fuel ManagementOEM # 17122490	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	HT2148AB	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148AB Hydraulic Roller Lifters Non Active Fuel Management EngineRiveted Retaining Pin	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	HT2148A	🇺🇸 US 🇨🇦 CA	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148A Hydraulic Roller Lifters Non Active Fuel Management EngineRiveted Retaining Pin	View on Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Lifter Guide

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12595365	🇺🇸 US 🇨🇦 CA	Tray Fitment notes — GM GENUINE 12595365 Tray Accommodates 4 Valve Lifters Each, with Side Grooves	View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	EG365	🇺🇸 US 🇨🇦 CA	Composite Fitment notes — ENGINETECH EG365 Composite Engine VIN code P,R,T	View on Amazon
SBI Fits: 6.2L V8 Supercharged	VL559G	🇺🇸 US 🇨🇦 CA	Intake and ExhaustNon-AFM Lifter Guide Fitment notes — SBI VL559G Intake and ExhaustNon-AFM Lifter GuideOEM # 12595365	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	HT2323K	🇺🇸 US 🇨🇦 CA	RearActive Fuel Management Engine	View on Amazon
SEALED POWER Fits: 6.2L V8 Supercharged	HT2322K	🇺🇸 US 🇨🇦 CA	FrontActive Fuel Management Engine	View on Amazon

This table covers the guides that keep each lifter aligned.

Valve Spring

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	466524	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466524 High PerformanceNo Warranty Up to 0.600 lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	466564	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466564 High PerformanceNo Warranty Closed Pressure And Length Is 147 @ 1.800Open Pressure And Length Is 406 @ 1.230with Dual Springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	466734	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466734 High PerformanceNo Warranty Dual SpringO.D. 1.295"I.D. 0.676"Closed Pressure and Length 125.4 @ 1.800Open Pressure and Length 370.4 @ 1.150Solid Height 1.100 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	461218	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 461218 High Performance Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	466944	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466944 High PerformanceNo Warranty Single SpringO.D. 1.300"I.D. 0.675"Closed Pressure and Length 125 @ 1.800Open Pressure and Length 370 @ 1.150Solid Height 1.000 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	225716	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 225716 High PerformanceNo Warranty Set of 16Installed Pressure 95 PSIOpen Pressure 300 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	461208	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 461208 High PerformanceNo Warranty Dual SpringO.D. 1.350"I.D. 0.704"Closed Pressure and Length 160 @ 1.800Open Pressure and Length 482 @ 1.100Solid Height 1.045 Inches	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	461219	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 461219 High PerformanceNo Warranty Closed Pressure And Length Is 135 @ 1.800Open Pressure And Length Is 348 @ 1.175with Dual Springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	4669416	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 4669416 High Performance Set of 16Installed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK2257	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK461208	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK461208 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK461219	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46652	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46694	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46673	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46673 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK2257T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK461208T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK461208T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK461219T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46652T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46694T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46697T	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46697T High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46673T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46673T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.2L V8 Supercharged	ERV3598	🇺🇸 US 🇨🇦 CA	Conical Fitment notes — ENGINETECH ERV3598 Conical Fits: Intake and Exhaust 2.126 Free HT or: Intake and ExhaustIntake and Exhaust 2.126 Free HT	View on Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged	12706568	🇺🇸 US 🇨🇦 CA	Spring Type: Single	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	VS2254	🇺🇸 US 🇨🇦 CA	Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	VS2257	🇺🇸 US 🇨🇦 CA	For Use with MTC-7, MTC-8 Camshafts	View on Amazon
SBI Popular Fits: 6.2L V8 Supercharged	1601488	🇺🇸 US 🇨🇦 CA	Intake and Exhaust2.130 Length Fitment notes — SBI 1601488 Intake and Exhaust2.130 Length1.257T O.D.0.845T I.DConical	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VTSS100	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING VTSS100 High Performance Setup Spring	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	46697	🇺🇸 US 🇨🇦 CA	High Performance Fitment notes — MELLING 46697 High Performance Closed Pressure 151 PSIStainless Steel Dual springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSK46697	🇺🇸 US 🇨🇦 CA	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46697 High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	3204046	🇺🇸 US 🇨🇦 CA	2.126 Free Length. Conical	View on Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged	10166344	🇺🇸 US 🇨🇦 CA	EXH	View on Amazon
MELLING Popular Fits: 6.2L V8 Supercharged	475264	🇺🇸 US 🇨🇦 CA	High PerformanceHardened Steel Fitment notes — MELLING 475264 High PerformanceHardened SteelNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	VSR709	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8 Supercharged	475274	🇺🇸 US 🇨🇦 CA	High PerformanceHardened Steel Fitment notes — MELLING 475274 High PerformanceHardened SteelNo Warranty For Use with Dual Springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	475284	🇺🇸 US 🇨🇦 CA	High PerformanceTitanium Fitment notes — MELLING 475284 High PerformanceTitaniumNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: 6.2L V8 Supercharged	475294	🇺🇸 US 🇨🇦 CA	High PerformanceTitanium Fitment notes — MELLING 475294 High PerformanceTitaniumNo Warranty For Use with Dual Springs	View on Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8 Supercharged	VL760	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINETECH Fits: 6.2L V8 Supercharged	EPC291	🇺🇸 US	Engine VIN code P,R,TSingle Round Groove	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	10166345	🇺🇸 US 🇨🇦 CA	Material: Alloy Steel	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	345005	🇺🇸 US 🇨🇦 CA	0.314 Stem. Round Bead In Middle.	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1211085	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.2900 Length Fitment notes — SBI 1211085 Intake and Exhaust0.2900 Length1 Round bead type0.3100 I.D.	View on Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged	SS71039	🇺🇸 US 🇨🇦 CA	Set Fitment notes — FEL-PRO SS71039 Set Intake and Exhaust	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	SS45921	🇺🇸 US 🇨🇦 CA	Metal with Molded RubberSet Fitment notes — MAHLE / CLEVITE SS45921 Metal with Molded RubberSet IntakePositive type	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged	SS45920	🇺🇸 US 🇨🇦 CA	SetMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE SS45920 SetMetal with Molded Rubber ExhaustPositive Type	View on Amazon
APEX Fits: 6.2L V8 Supercharged	AVS3072	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AVS3072 Set Intake and Exhaust	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	876100	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1 Fitment notes — ELRING 876100 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1Valve Stem Diameter [MM]: 8,5	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	876110	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2 Fitment notes — ELRING 876110 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2Valve Stem Diameter [MM]: 8,5	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12482063	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482063 SetContains 8 Seals Intakewith Spring Shim14.4mm	View on Amazon
GM GENUINE Fits: 6.2L V8 Supercharged	12482062	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482062 SetContains 8 Seals Exhaust1,2,3,4,522.8MM	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	3890045	🇺🇸 US 🇨🇦 CA	Viton Top Hat Fitment notes — QUALCAST 3890045 Viton Top Hat Intake	View on Amazon
QUALCAST Fits: 6.2L V8 Supercharged	3890145	🇺🇸 US 🇨🇦 CA	Viton Top Hat Fitment notes — QUALCAST 3890145 Viton Top Hat Exhaust	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1221337	🇺🇸 US 🇨🇦 CA	IntakeViton Material Fitment notes — SBI 1221337 IntakeViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
SBI Fits: 6.2L V8 Supercharged	1221338	🇺🇸 US 🇨🇦 CA	ExhaustViton Material Fitment notes — SBI 1221338 ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
ULTRA-POWER Fits: 6.2L V8 Supercharged	SS71039	🇺🇸 US 🇨🇦 CA	SetPremium Valve Stem Seals Included Fitment notes — ULTRA-POWER SS71039 SetPremium Valve Stem Seals Included16 Pieces EXHAUSTINTAKE	View on Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged	121003401	🇺🇸 US 🇨🇦 CA	SetContains 16 Pieces Fitment notes — VICTOR REINZ 121003401 SetContains 16 PiecesImproved Design Intake and Exhaust	View on Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8 Supercharged	858000	🇺🇸 US 🇨🇦 CA	Material: ACM (Polyacrylate) Fitment notes — ELRING 858000 Material: ACM (Polyacrylate) Adjuster Seal	View on Amazon
ELRING Fits: 6.2L V8 Supercharged	B37380	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.