2016 Cadillac CTS Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 138 engine parts for the 2016 Cadillac CTS, across 35 part types, covering all 4 engine options (2.0L L4 Turbocharged, 3.6L V6, 3.6L V6 Turbocharged and 6.2L V8 Supercharged). Every part shows its brand, manufacturer part number and fitment notes.

On the 2016 Cadillac CTS, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Camshaft (30 parts), Connecting Rod Bearing (19 parts) and Crankshaft Seal (14 parts). The other 32 part types cover the remaining 75 parts.

Barometric Pressure Sensor

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12711681
🇺🇸 US 🇨🇦 CA
8 speed Automatic trans.
View on
Amazon

This table covers the Barometric pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.

Camshaft

High Performance

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 6.2L V8 Supercharged 22205
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 2High Performance
Fitment notes — MELLING 22205
Stage 2High PerformanceNo Warranty
RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift
View on
Amazon
MELLING Popular Fits: 6.2L V8 Supercharged 22308
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 3High Performance
Fitment notes — MELLING 22308
Stage 3High PerformanceNo Warranty
RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 242Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Popular Fits: 6.2L V8 Supercharged 22240
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 2High Performance
Fitment notes — MELLING 22240
Stage 2High Performance
RPM Range: 1950-54503 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 219Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller
View on
Amazon
MELLING Popular Fits: 6.2L V8 Supercharged 22307
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 3High Performance
Fitment notes — MELLING 22307
Stage 3High PerformanceNo Warranty
RPM Range: Idle-50003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift
View on
Amazon
MELLING Popular Fits: 6.2L V8 Supercharged 22500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 5High Performance
Fitment notes — MELLING 22500
Stage 5High PerformanceNo Warranty
RPM Range: 2000-60003 Bolt Non VVT107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22239
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 2High Performance
Fitment notes — MELLING 22239
Stage 2High Performance
RPM Range: 1750-52503 Bolt Non VVT111.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 215Exhaust Duration at .050 Lift: 225Non Active Fuel Management EngineHydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22333
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 3High Performance
Fitment notes — MELLING 22333
Stage 3High Performance
RPM Range: 2150-56503 Bolt Non VVT114.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 223Exhaust Duration at .050 Lift: 229Non Active Fuel Management EngineHydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22405
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance (May Not be Computer Compatible)
Fitment notes — MELLING 22405
Stage 4High Performance (May Not be Computer Compatible)
RPM Range: 2550-60500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 231Exhaust Duration at .050 Lift: 233Hydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22406
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance (May Not be Computer Compatible)
Fitment notes — MELLING 22406
Stage 4High Performance (May Not be Computer Compatible)
RPM Range: 2350-58450.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 235Exhaust Duration at .050 Lift: 235Hydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22426
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING 22426
Stage 4High Performance
RPM Range: 2350-58503 Bolt Non VVT116 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 227Exhaust Duration at .050 Lift: 231Non Active Fuel Management EngineHydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22503
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 5High Performance (May Not be Computer Compatible)
Fitment notes — MELLING 22503
Stage 5High Performance (May Not be Computer Compatible)
RPM Range: 2950-64500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 239Exhaust Duration at .050 Lift: 237Hydraulic Roller
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22411
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING 22411
Stage 4High PerformanceNo Warranty
RPM Range: 2000-60003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22412
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING 22412
Stage 4High PerformanceNo Warranty
RPM Range: 2000-65003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Non Active Fuel Management EngineHydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged 22413
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING 22413
Stage 4High PerformanceNo Warranty
RPM Range: 2000-60003 Bolt Non VVT108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22500D
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 5High Performance
Fitment notes — MELLING CK22500D
Stage 5High PerformanceChromoly Retainers And Dual SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22205B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 2High Performance
Fitment notes — MELLING CK22205B
Stage 2High PerformanceNo Warranty
RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineChromoly Retainers with Beehive Springs112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22412D
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22412D
Stage 4High PerformanceChromoly Retainers And Dual SpringsNo Warranty
RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22307B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 3High Performance
Fitment notes — MELLING CK22307B
Stage 3High PerformanceChromoly Retainers And Beehive SpringsNo Warranty
RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22411B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22411B
Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22412B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22412B
Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22413B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22413B
Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22500B
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 5High Performance
Fitment notes — MELLING CK22500B
Stage 5High PerformanceChromoly Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22205BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 2High Performance
Fitment notes — MELLING CK22205BT
Stage 2High PerformanceNo Warranty
RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainers, Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22307BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 3High Performance
Fitment notes — MELLING CK22307BT
Stage 3High PerformanceNo Warranty
RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22411BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22411BT
Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22412BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22412BT
Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22413BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22413BT
Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22500BT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 5High Performance
Fitment notes — MELLING CK22500BT
Stage 5High PerformanceTitanium Retainers And Beehive SpringsNo Warranty
RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged CK22412DT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stage 4High Performance
Fitment notes — MELLING CK22412DT
Stage 4High PerformanceTitanium Retainers And Dual SpringsNo Warranty
RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged 12742438
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged 12686894
🇺🇸 US 🇨🇦 CA
COMPLETE ENGINE
View on
Amazon
DURA-BOND Fits: 6.2L V8 Supercharged CHP26T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Coated
View on
Amazon
ENGINETECH Fits: 6.2L V8 Supercharged CC193P
🇺🇸 US
Coated Inside Diameter
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged SH2231S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
CoatedHigh Performance
View on
Amazon
SEALED POWER Fits: 6.2L V8 Supercharged C2116M
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Bolt

Brand Part Number Markets Notes Buy
ELRING Fits: 6.2L V8 Supercharged 857390
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Retainer Bolt
View on
Amazon

This table covers the Camshaft bolts.

Camshaft Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 24575061
🇺🇸 US 🇨🇦 CA
Outside Diameter (In): 0.185 In
Fitment notes — GM GENUINE 24575061
Outside Diameter (In): 0.185 In
17MM LONG
View on
Amazon

This table covers the Camshaft Dowel pins.

Camshaft Retainer / Thrust Plate

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 Supercharged ES73115
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Camshaft retainer plate & mounting bolts includedComplete Set
Fitment notes — FEL-PRO ES73115
Camshaft retainer plate & mounting bolts includedComplete Set
Will Service Both Recessed Bolt Holes & Flat-Type Bolt Holes
View on
Amazon
MELLING Popular Fits: 6.2L V8 Supercharged MF127
🇺🇸 US 🇨🇦 CA
View on
Amazon
APEX Fits: 6.2L V8 Supercharged AES319
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Retainer Bolt
View on
Amazon
APEX Fits: 6.2L V8 Supercharged AES318
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Mounting Bolts
View on
Amazon
ENGINETECH Fits: 6.2L V8 Supercharged CR9016
🇺🇸 US
Retainer plate with recessed bolt holes
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 12589016
🇺🇸 US 🇨🇦 CA
Includes Seal
View on
Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged B32270
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Steel with Molded RubberCamshaft Cover Gasket
Fitment notes — MAHLE / CLEVITE B32270
Steel with Molded RubberCamshaft Cover Gasket
Recessed Bolt Holes In Camshaft Retainer Plate
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged 711836900
🇺🇸 US 🇨🇦 CA
with Recessed Bolts
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod Bearing

High Performance

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HN
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE CB663HN
High PerformanceH Series (Tri-Metal)NarrowedPairMax. Length: 0.7920
N
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HND
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE CB663HND
High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting RodPairMax. Length: 0.7920
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663FN
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformancePair
Fitment notes — MAHLE / CLEVITE CB663FN
High PerformancePairNarrowed
F Series (Tri-Metal)N
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663FND
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformancePair
Fitment notes — MAHLE / CLEVITE CB663FND
High PerformancePairNarrowed / Doweled Connecting Rod
F Series (Tri-Metal)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663FXN
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformancePair
Fitment notes — MAHLE / CLEVITE CB663FXN
High PerformancePair.001in Extra Oil Clearance / Narrowed
F Series (Tri-Metal)XN
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663FXND
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformancePair
Fitment notes — MAHLE / CLEVITE CB663FXND
High PerformancePair.001in Extra Oil Clearance / Narrowed / Doweled Connecting Rod
F Series (Tri-Metal)XND
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HXN
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Performance.001in Extra Oil Clearance / Narrowed
Fitment notes — MAHLE / CLEVITE CB663HXN
High Performance.001in Extra Oil Clearance / NarrowedH Series (Tri-Metal)PairMax. Length: 0.7920
XN (Size: Standard)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HXND
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting Rod
Fitment notes — MAHLE / CLEVITE CB663HXND
High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting RodH Series (Tri-Metal)PairMax. Length: 0.7920
XND (Size: Standard)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HNC
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE CB663HNC
High PerformanceH Series (Tri-Metal)Narrowed / CoatedPair
NC
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HXNC
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Performance.001in Extra Oil Clearance / Narrowed / Coated
Fitment notes — MAHLE / CLEVITE CB663HXNC
High Performance.001in Extra Oil Clearance / Narrowed / CoatedH Series (Tri-Metal)Pair
XNC (Size: Standard)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB663HNDC
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE CB663HNDC
High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting Rod / CoatedPair
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged CB663A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Pair
Fitment notes — MAHLE / CLEVITE CB663A
A Series (Aluminum)PairVertical Oil Clearance (maximum): 0.0028
View on
Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged CB663P
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
P Series (Tri-Metal)Pair
Fitment notes — MAHLE / CLEVITE CB663P
P Series (Tri-Metal)Pair
Chevrolet Engine
View on
Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged CB663A8
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Set
Fitment notes — MAHLE / CLEVITE CB663A8
A Series (Aluminum)SetVertical Oil Clearance (maximum): 0.0028
View on
Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged CB663P8
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
P Series (Tri-Metal)Set
Fitment notes — MAHLE / CLEVITE CB663P8
P Series (Tri-Metal)SetVertical Oil Clearance (minimum): 0.0007
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 12735504
🇺🇸 US 🇨🇦 CA
Contains 2 Bearing Inserts
Fitment notes — GM GENUINE 12735504
Contains 2 Bearing Inserts
Standard
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB1776A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Pair
Fitment notes — MAHLE / CLEVITE CB1776A
A Series (Aluminum)Pair
Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged CB1776A8
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)Set
Fitment notes — MAHLE / CLEVITE CB1776A8
A Series (Aluminum)Set
Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock
View on
Amazon
SEALED POWER Fits: 6.2L V8 Supercharged 2555A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A-Series Aluminum BearingsStandard Shaft Minimum (Inch): 2.0990 In
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 11548432
🇺🇸 US 🇨🇦 CA
Single UseM9X1X44
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 Supercharged 54323600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
APEX Fits: 6.2L V8 Supercharged ACS13056
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 6.2L V8 Supercharged C376CSA
🇺🇸 US
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged CS267441
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes RTV Sealant
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Main Bearing

High Performance

Brand Part Number Markets Notes Buy
KING ENGINE BEARINGS Popular Fits: 6.2L V8 Supercharged MB5013XP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race bearings, Trimetal [Pmax Black]Set
View on
Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8 Supercharged MS2339H
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE MS2339H
High PerformanceH Series (Tri-Metal)Set
(Size: Standard)
View on
Amazon
KING ENGINE BEARINGS Fits: 6.2L V8 Supercharged MB5013XPX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Race bearings, Trimetal [Pmax Black]Set
Fitment notes — KING ENGINE BEARINGS MB5013XPX
Race bearings, Trimetal [Pmax Black]Setwith Extra Oil Clearance
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged MS2339HX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceH Series (Tri-Metal)
Fitment notes — MAHLE / CLEVITE MS2339HX
High PerformanceH Series (Tri-Metal)Set
.001 IN Extra Oil Clearance (Size: Standard)
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 Supercharged BC623J
🇺🇸 US
Set
Fitment notes — ENGINETECH BC623J
Set
Bimetal polymer coated
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged MS2339A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
A Series (Aluminum)F1 Coated
Fitment notes — MAHLE / CLEVITE MS2339A
A Series (Aluminum)F1 CoatedSet
View on
Amazon
Brand Part Number Markets Notes Buy
ENGINE PRO Fits: 6.2L V8 Supercharged 122339H
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Performance H SeriesSet
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 11546565
🇺🇸 US 🇨🇦 CA
M8X1.25X25HEX FLANGE
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 11548076
🇺🇸 US 🇨🇦 CA
M10X2X96
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 11548075
🇺🇸 US 🇨🇦 CA
M10X2X82
View on
Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
NATIONAL Popular Fits: 6.2L V8 Supercharged 99215
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
WJB / INMOTION PARTS Popular Fits: 6.2L V8 Supercharged WS99215
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
BCA Fits: 6.2L V8 Supercharged NS99215
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
BCA Fits: 6.2L V8 Supercharged NS99452
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged 16229
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearWide Lip
Fitment notes — FEL-PRO 16229
RearWide Lip1.156 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged 16228
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearNarrow Lip
Fitment notes — FEL-PRO 16228
RearNarrow Lip0.780 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged 711457300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 6.2L V8 Supercharged WS99452
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Repair Sleeve Tool

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 Supercharged 16329
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged 12634614
🇺🇸 US 🇨🇦 CA
Material: Steel PlasticSeal Type: Spring Loaded Multi Lip
Fitment notes — GM GENUINE 12634614
Material: Steel PlasticSeal Type: Spring Loaded Multi LipFront
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged 89060436
🇺🇸 US 🇨🇦 CA
RearReverse Lip Seal
View on
Amazon
TIMKEN Popular Fits: 6.2L V8 Supercharged 100470
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
APEX Fits: 6.2L V8 Supercharged ATC13510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Seal Only
Fitment notes — APEX ATC13510
Seal Only
Front
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged TCS46221
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontRecommend replacing Engine Crankshaft Pulley Bolt with FEL-Pro 73372
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged BS406401
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS406401
PTFE RubberIncludes Sleeve
Rear1 Piece
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 12665076
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
NATIONAL Fits: 6.2L V8 Supercharged 711129
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
NATIONAL Fits: 6.2L V8 Supercharged 711130
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
SKF Fits: 6.2L V8 Supercharged 38617
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
TIMKEN Fits: 6.2L V8 Supercharged 100085
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 Supercharged 811058700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
WJB / INMOTION PARTS Fits: 6.2L V8 Supercharged WS711130
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Outside Diameter: 4.5389999999999997 In
Fitment notes — WJB / INMOTION PARTS WS711130
Outside Diameter: 4.5389999999999997 In
Rear
View on
Amazon
WJB / INMOTION PARTS Fits: 6.2L V8 Supercharged WS711129
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.2L V8 Supercharged 635786
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 12705665
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 12705663
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the Crankshaft Seal covers.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12627520
🇺🇸 US 🇨🇦 CA
Black
Fitment notes — GM GENUINE 12627520
Black
Rear
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Deactivation Solenoid

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12699793
🇺🇸 US 🇨🇦 CA
Electrical Connector Terminal Quantity: 5
View on
Amazon

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Cylinder Head

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12699619
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12570326
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 Supercharged 11546959
🇺🇸 US 🇨🇦 CA
M12X1.75X134
View on
Amazon
APEX Fits: 6.2L V8 Supercharged AHB1351
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
View on
Amazon
FEL-PRO Fits: 6.2L V8 Supercharged ES73121
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO ES73121
Set
Head Bolts with Washers
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 11611976
🇺🇸 US 🇨🇦 CA
M12X1.75X102
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged GS33938
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cylinder Head Bolt KitSet
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
APEX Popular Fits: 6.2L V8 Supercharged AHG1425
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 Supercharged 12654622
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon
AJUSA Fits: 6.2L V8 Supercharged 10265100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10265100
Multi Layered Steel
104 Bore Diameter
View on
Amazon
AJUSA Fits: 6.2L V8 Supercharged 52616000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Right
Fitment notes — AJUSA 52616000
Fits:
Right
or:
Left
View on
Amazon
ENGINE PRO Fits: 6.2L V8 Supercharged 2812654622
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Number of Layers: 7
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 Supercharged 55549
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 Supercharged 52615900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Complete Set
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
MELLING Fits: 6.2L V8 Supercharged CSL359F
🇺🇸 US 🇨🇦 CA
Aluminum Cylinder Block OnlySemi Finished Inside Diameter
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Drain Plug

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 11546667
🇺🇸 US 🇨🇦 CA
Thread Diameter (In): 0.63 In
Fitment notes — GM GENUINE 11546667
Thread Diameter (In): 0.63 In
M16X1.5X16.25
View on
Amazon

This table covers the Engine Block drain plugs.

Engine Block Heater

Brand Part Number Markets Notes Buy
KAT'S HEATERS Fits: 6.2L V8 Supercharged 11484
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Freeze Plug Heater
Fitment notes — KAT'S HEATERS 11484
Freeze Plug Heater
Easiest Mounting Location: Front LeftThreadedThreaded Electrical Plug End28mm400 Watts
View on
Amazon
KAT'S HEATERS Fits: 6.2L V8 Supercharged 28510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Heater Replacement Cord
Fitment notes — KAT'S HEATERS 28510
Engine Heater Replacement Cord
120 Volts18 Gauge3 Wire3 Prong5 ft.with Thermostat
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 Supercharged 50553600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12678746
🇺🇸 US 🇨🇦 CA
Valve Head Diameter: 0.86 In
View on
Amazon
MELLING Fits: 6.2L V8 Supercharged V5815
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Fuel Pump Camshaft Follower

Brand Part Number Markets Notes Buy
SPECTRA PREMIUM Fits: 6.2L V8 Supercharged FSA1212CF
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8 Supercharged GDF103
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the followers that drive a mechanical fuel pump off the camshaft.

Harmonic Balancer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12713718
🇺🇸 US 🇨🇦 CA
Center Bolt Thread Diameter (In): 0.63 In
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 Supercharged 73372
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 Supercharged 11547372
🇺🇸 US 🇨🇦 CA
Single UseM16X2X103
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12701996
🇺🇸 US 🇨🇦 CA
Single or Dual Plane Type: Dual Plane
Fitment notes — GM GENUINE 12701996
Single or Dual Plane Type: Dual Plane
8 speed Automatic trans.
View on
Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 11546958
🇺🇸 US 🇨🇦 CA
M6 X 195 MM
View on
Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Cover

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12650928
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Intake Manifold covers.

Intake Valve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 Supercharged 12650770
🇺🇸 US 🇨🇦 CA
Seat Angle: 45 DD
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Buying Engine Parts for a 2016 Cadillac CTS

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Camshaft and Connecting Rod Bearing .

Frequently Asked Questions

How many engine parts fit the 2016 Cadillac CTS?

Our catalog currently lists 138 engine parts for the 2016 Cadillac CTS across 35 subcategories and 22 brands, covering all 4 engine options (2.0L L4 Turbocharged, 3.6L V6, 3.6L V6 Turbocharged and 6.2L V8 Supercharged). Each part is matched to the engine(s) it fits.

Do engine parts differ between 2016 Cadillac CTS engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2016 Cadillac CTS?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Cadillac CTS was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2016 Cadillac CTS?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2016 Cadillac CTS

Engine Parts for Other Cadillac CTS Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.