How many engine parts fit the 2012 Cadillac Escalade?

Our catalog currently lists 886 engine parts for the 2012 Cadillac Escalade across 127 subcategories and 71 brands, covering both the 6.0L V8 ELECTRIC/GAS and the 6.2L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2012 Cadillac Escalade engines?

Some do. 580 parts fit every engine; the other 306 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2012 Cadillac Escalade?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Cadillac Escalade was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2012 Cadillac Escalade?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

2012 Cadillac Escalade Engine Parts: OEM & Replacement (886 Parts)

Q: What oil viscosity is listed for the 2012 Cadillac Escalade?

Oil rows on this page include SAE 0W-30, SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

Camshaft

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.0L V8 ELECTRIC/GAS	22205	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22205 Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	22206	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22206 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: 6.0L V8 ELECTRIC/GAS	22307	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22307 Stage 3High PerformanceNo Warranty RPM Range: Idle-50003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	22309	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22309 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	22207	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING 22207 Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22310	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22310 Stage 3 LSHigh PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22308	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22308 Stage 3High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 242Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22239	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22239 Stage 2High Performance RPM Range: 1750-52503 Bolt Non VVT111.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 215Exhaust Duration at .050 Lift: 225Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22240	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING 22240 Stage 2High Performance RPM Range: 1950-54503 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 219Exhaust Duration at .050 Lift: 227Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22323	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22323 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22324	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22324 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22325	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22325 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22326	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22326 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22327	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22327 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22328	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING 22328 Stage 3 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22333	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING 22333 Stage 3High Performance RPM Range: 2150-56503 Bolt Non VVT114.5 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 223Exhaust Duration at .050 Lift: 229Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22405	🇺🇸 US 🇨🇦 CA	Stage 4High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22405 Stage 4High Performance (May Not be Computer Compatible) RPM Range: 2550-60500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 231Exhaust Duration at .050 Lift: 233Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22406	🇺🇸 US 🇨🇦 CA	Stage 4High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22406 Stage 4High Performance (May Not be Computer Compatible) RPM Range: 2350-58450.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 235Exhaust Duration at .050 Lift: 235Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22422	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING 22422 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22423	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING 22423 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22424	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING 22424 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22425	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING 22425 Stage 4 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22426	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22426 Stage 4High Performance RPM Range: 2350-58503 Bolt Non VVT116 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 227Exhaust Duration at .050 Lift: 231Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22501	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING 22501 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	22502	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING 22502 Stage 5 LSHigh PerformanceNo Warranty 3 Bolt Non VVT113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Non Active Fuel Management EngineHydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22503	🇺🇸 US 🇨🇦 CA	Stage 5High Performance (May Not be Computer Compatible) Fitment notes — MELLING 22503 Stage 5High Performance (May Not be Computer Compatible) RPM Range: 2950-64500.625 IN Intake Valve Lift0.610 In Exhaust Valve LiftIntake Duration at .050 Lift: 239Exhaust Duration at .050 Lift: 237Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22411	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22411 Stage 4High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22412	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22412 Stage 4High PerformanceNo Warranty RPM Range: 2000-65003 Bolt Non VVT110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Non Active Fuel Management EngineHydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22413	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING 22413 Stage 4High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	22500	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING 22500 Stage 5High PerformanceNo Warranty RPM Range: 2000-60003 Bolt Non VVT107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Non Active Fuel Management EngineHydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22425D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22500D	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500D Stage 5High PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22309B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22310B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22207D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceChromoly Retainers And Dual Springs Fitment notes — MELLING CK22207D Stage 2 LSl High PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22325D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22326D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22328D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22422D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22423D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423D Stage 4 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22424D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424D Stage 4 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22501D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501D Stage 5 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22502D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502D Stage 5 LSHigh PerformanceChromoly Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22205B	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING CK22205B Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineChromoly Retainers with Beehive Springs112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22206B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22206B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22207B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceChromoly Retainers And Beehive Springs Fitment notes — MELLING CK22207B Stage 2 LSl High PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22323B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22324B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22325B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22326B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22327B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22328B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328B Stage 3 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22422B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22423B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22424B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22425B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425B Stage 4 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22206DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22412D	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412D Stage 4High PerformanceChromoly Retainers And Dual SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22307B	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING CK22307B Stage 3High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22411B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22411B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22412B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22413B	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22413B Stage 4High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22500B	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500B Stage 5High PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22501B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22502B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502B Stage 5 LSHigh PerformanceChromoly Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22309BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22309BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.560 IN Intake Valve Lift0.560 IN Exhaust Valve LiftIntake Duration at .050 Lift: 216Exhaust Duration at .050 Lift: 220Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22310BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22310BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 220Exhaust Duration at .050 Lift: 224Hydraulic Roller0.575 IN Intake Valve Lift0.575 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22207BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22323BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22323BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22325BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22326BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22327BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22328BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22422BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22423BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22424BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22425BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425BT Stage 4 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22205BT	🇺🇸 US 🇨🇦 CA	Stage 2High Performance Fitment notes — MELLING CK22205BT Stage 2High PerformanceNo Warranty RPM Range: 2200-54003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainers, Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 230Hydraulic Roller0.585 IN Intake Valve Lift0.585 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22206BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22206BT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring111 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22324BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22324BT Stage 3 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine109 Degrees of Lobe Separation0.553 IN Intake Valve Lift0.553 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22307BT	🇺🇸 US 🇨🇦 CA	Stage 3High Performance Fitment notes — MELLING CK22307BT Stage 3High PerformanceNo Warranty RPM Range: Idle-50003 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Beehive Spring112 Degrees of Lobe SeparationIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 227Hydraulic Roller0.523 IN Intake Valve Lift0.524 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22411BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22411BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 225Exhaust Duration at .050 Lift: 240Hydraulic Roller0.525 IN Intake Valve Lift0.525 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22412BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22413BT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22413BT Stage 4High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine108 Degrees of Lobe SeparationIntake Duration at .050 Lift: 229Exhaust Duration at .050 Lift: 240Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22500BT	🇺🇸 US 🇨🇦 CA	Stage 5High Performance Fitment notes — MELLING CK22500BT Stage 5High PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine107 Degrees of Lobe SeparationIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 277Hydraulic Roller0.595 IN Intake Valve Lift0.595 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22207DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 2 LSl High PerformanceNo Warranty Fitment notes — MELLING CK22207DT Stage 2 LSl High PerformanceNo Warranty 3 Bolt Non VVT, Non Active Fuel Management EngineTitanium Retainer and Dual Spring112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 212Exhaust Duration at .050 Lift: 218Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22325DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22325DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 218Exhaust Duration at .050 Lift: 224Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22326DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22326DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.604 IN Intake Valve Lift0.604 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22327DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22328DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22328DT Stage 3 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 226Exhaust Duration at .050 Lift: 238Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22422DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22422DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 228Exhaust Duration at .050 Lift: 234Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22423DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22423DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 232Exhaust Duration at .050 Lift: 240Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22424DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22424DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22425DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 4 LSHigh Performance Fitment notes — MELLING CK22425DT Stage 4 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-60003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 230Exhaust Duration at .050 Lift: 244Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22501DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22502DT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502DT Stage 5 LSHigh PerformanceTitanium Retainers And Dual Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22501BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22501BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive SpringsNo Warranty RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 234Exhaust Duration at .050 Lift: 248Hydraulic Roller	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22502BT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 5 LSHigh Performance Fitment notes — MELLING CK22502BT Stage 5 LSHigh PerformanceTitanium Retainers And Beehive Springs RPM Range: 2500-65003 Bolt Non VVT, Non Active Fuel Management Engine113 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 238Exhaust Duration at .050 Lift: 252Hydraulic Roller	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	CK22412DT	🇺🇸 US 🇨🇦 CA	Stage 4High Performance Fitment notes — MELLING CK22412DT Stage 4High PerformanceTitanium Retainers And Dual SpringsNo Warranty RPM Range: 2000-65003 Bolt Non VVT, Non Active Fuel Management Engine110 Degrees of Lobe SeparationIntake Duration at .050 Lift: 236Exhaust Duration at .050 Lift: 246Hydraulic Roller0.612 IN Intake Valve Lift0.612 IN Exhaust Valve Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	CK22327D	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Stage 3 LSHigh Performance Fitment notes — MELLING CK22327D Stage 3 LSHigh PerformanceChromoly Retainers And Dual SpringsNo Warranty 3 Bolt Non VVT, Non Active Fuel Management Engine112 Degrees of Lobe Separation0.625 IN Intake Valve Lift0.625 IN Exhaust Valve LiftIntake Duration at .050 Lift: 224Exhaust Duration at .050 Lift: 230Hydraulic Roller	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.0L V8 ELECTRIC/GAS	ES9698	🇺🇸 US 🇨🇦 CA	Engine VIN Code 5,J	View on Amazon
GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS	12629698	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Includes Pin	View on Amazon
GM GENUINE Popular Fits: 6.2L V8	12623066	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 6.2L V8	MC1426	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MELLING Popular Fits: 6.2L V8	MC1431	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	AFM Delete CamshaftThe Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software. Fitment notes — MELLING MC1431 AFM Delete CamshaftThe Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software.The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.	View on Amazon
SKP Popular Fits: 6.0L V8 ELECTRIC/GAS	SKES9698	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINETECH Fits: 6.2L V8	ES1426	🇺🇸 US		View on Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand	Part Number	Markets	Notes	Buy
DURA-BOND Popular Fits: all 2012 Escalade engines	CH25	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ENGINETECH Popular Fits: all 2012 Escalade engines	CC433W	🇺🇸 US	Full Set Fitment notes — ENGINETECH CC433W Full Set 0.765 Wide Bearings	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	19260874	🇺🇸 US 🇨🇦 CA	Serv by Engine Replacement OnlyPosition # 1 and # 5 Fitment notes — GM GENUINE 19260874 Serv by Engine Replacement OnlyPosition # 1 and # 5Diameter 2.353-2.354 Position # 1 and # 5Diameter 2.353-2.354	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.0L V8 ELECTRIC/GAS	SH2125S	🇺🇸 US 🇨🇦 CA	Non CoatedFull Set	View on Amazon
DURA-BOND Fits: all 2012 Escalade engines	CHP25	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
DURA-BOND Fits: all 2012 Escalade engines	CHP25T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Coated	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	152125	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	(.775" Wide No. 1-5 Position) Also VIN 8 Fitment notes — ENGINE PRO 152125 (.775" Wide No. 1-5 Position) Also VIN 8 (.775" Wide No. 1-5 Position)	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	CC433W1	🇺🇸 US	.001 undersized ID For tighter Oil clearance	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	CC438W	🇺🇸 US	Full Set Fitment notes — ENGINETECH CC438W Full Set .010 undersized ID For reground camshaft journals	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	CC192P	🇺🇸 US	High Performance Polydyn Coating Fitment notes — ENGINETECH CC192P High Performance Polydyn Coating Escalade Base Model	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	19260875	🇺🇸 US 🇨🇦 CA	Position # 2 and # 4Diameter 2.334-2.335	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	19260876	🇺🇸 US 🇨🇦 CA	Serv by Engine Replacement OnlyPosition # 3 Fitment notes — GM GENUINE 19260876 Serv by Engine Replacement OnlyPosition # 3Diameter 2.314-2.315 Position # 3Diameter 2.314-2.315	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	CS5171BB	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Bi-Metal (Babbitt) Fitment notes — KING ENGINE BEARINGS CS5171BB Bi-Metal (Babbitt) .775 IN Wide	View on Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: all 2012 Escalade engines	857390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Retainer Bolt	View on Amazon

This table covers the Camshaft bolts.

Camshaft Dowel Pin

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	24575061	🇺🇸 US 🇨🇦 CA	Outside Diameter (In): 0.185 In Fitment notes — GM GENUINE 24575061 Outside Diameter (In): 0.185 In 17MM LONG	View on Amazon

This table covers the Camshaft Dowel pins.

Camshaft Gear Installation Tool

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: all 2012 Escalade engines	CSITLS	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	No Warranty Fitment notes — MELLING CSITLS No Warranty Designed To AID In The Installation of Both Camshaft Sprockets and VVT PhasersCan be Used On Both Single and Three Bolt Camshafts	View on Amazon

This table covers the Camshaft Gear Installation tools. This is a service tool, not a wear part — match the application in the notes.

Camshaft Hardware Kit

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: all 2012 Escalade engines	HK119	🇺🇸 US 🇨🇦 CA	With .642 OD cylinder head dowels Fitment notes — ENGINETECH HK119 With .642 OD cylinder head dowels Escalade EXT	View on Amazon

This table covers the Camshaft hardware kits.

Camshaft Retainer / Thrust Plate

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	ES73115	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Camshaft retainer plate & mounting bolts includedComplete Set Fitment notes — FEL-PRO ES73115 Camshaft retainer plate & mounting bolts includedComplete Set Will Service Both Recessed Bolt Holes & Flat-Type Bolt Holes	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	MF127	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
APEX Fits: all 2012 Escalade engines	AES319	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Retainer Bolt	View on Amazon
APEX Fits: all 2012 Escalade engines	AES318	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Mounting Bolts	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	857150	🇺🇸 US 🇨🇦 CA	without Bolts/Screws Fitment notes — ELRING 857150 without Bolts/Screws Front	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	857320	🇺🇸 US 🇨🇦 CA	with Bolts/Screws Fitment notes — ELRING 857320 with Bolts/Screws Front	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	CR6437	🇺🇸 US 🇨🇦 CA	Retainer Plate with Flat Bolt Holes	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	CR9016	🇺🇸 US 🇨🇦 CA	Retainer plate with recessed bolt holes	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12589016	🇺🇸 US 🇨🇦 CA	Includes Seal Fitment notes — GM GENUINE 12589016 Includes Seal 4 speed Automatic trans.Use with Bolt 11561455 Fits: Escalade Base Model6 speed Automatic trans.Use with Bolt 11561455 or: Escalade ESV or Escalade EXTUse with Bolt 11561455	View on Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Camshaft Seal

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: all 2012 Escalade engines	01713900	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	B32270	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Steel with Molded RubberCamshaft Cover Gasket Fitment notes — MAHLE / CLEVITE B32270 Steel with Molded RubberCamshaft Cover Gasket Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	711836900	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Recessed Bolts	View on Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: all 2012 Escalade engines	ECR326	🇺🇸 US 🇨🇦 CA	Reconditioned Fitment notes — ENGINETECH ECR326 Reconditioned Floating pinsStandard Bearing Outer Diameter	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12649190	🇺🇸 US 🇨🇦 CA	Material: Forged Steel Fitment notes — GM GENUINE 12649190 Material: Forged Steel 4 speed Automatic trans. Used with Floating Pin Pistonwith Pin Retaining Clip	View on Amazon

This table covers the connecting rods between each piston and the crankshaft.

Connecting Rod Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: all 2012 Escalade engines	11663H	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Performance H SeriesSet Fitment notes — ENGINE PRO 11663H Performance H SeriesSetPair	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	11663HX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceExtra Oil Clearance of .001 Fitment notes — ENGINE PRO 11663HX High PerformanceExtra Oil Clearance of .001Pair (Size: Standard)	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	11663HD	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performancewith dowel hole Fitment notes — ENGINE PRO 11663HD High Performancewith dowel holePair	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	11663HC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceCoated Fitment notes — ENGINE PRO 11663HC High PerformanceCoatedPerformance H Series CoatedSetPairNitro Black Coated Performance	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	11663HXC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceCoated Fitment notes — ENGINE PRO 11663HXC High PerformanceCoatedExtra Oil Clearance of .001Performance H Series +.001 Bearing Oversize CoatedSetPairNitro Black Coated Performance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	CR807HPND	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetRace bearings, BI-Metal [Alecular] Fitment notes — KING ENGINE BEARINGS CR807HPND SetRace bearings, BI-Metal [Alecular]Narrowwith dowel hole	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	CR807HPNDX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNDX Race bearings, BI-Metal [Alecular]SetNarrowwith Extra Oil Clearancewith dowel hole	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HN High PerformanceH Series (Tri-Metal)NarrowedPairMax. Length: 0.7920 N	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HND	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HND High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting RodPairMax. Length: 0.7920	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663FN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FN High PerformancePairNarrowed F Series (Tri-Metal)N	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663VN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNarrowed Fitment notes — MAHLE / CLEVITE CB663VN High PerformanceNarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair N	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663VXN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663VXN High Performance.001in Extra Oil Clearance / NarrowedV Series (TRI-Metal/Lead-Indium Overlay)Pair XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663FND	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FND High PerformancePairNarrowed / Doweled Connecting Rod F Series (Tri-Metal)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663FXN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXN High PerformancePair.001in Extra Oil Clearance / Narrowed F Series (Tri-Metal)XN	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663FXND	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformancePair Fitment notes — MAHLE / CLEVITE CB663FXND High PerformancePair.001in Extra Oil Clearance / Narrowed / Doweled Connecting Rod F Series (Tri-Metal)XND	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HXN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance.001in Extra Oil Clearance / Narrowed Fitment notes — MAHLE / CLEVITE CB663HXN High Performance.001in Extra Oil Clearance / NarrowedH Series (Tri-Metal)PairMax. Length: 0.7920 XN (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HXND	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting Rod Fitment notes — MAHLE / CLEVITE CB663HXND High Performance.001 in Extra Oil Clearance / Narrowed / Doweled Connecting RodH Series (Tri-Metal)PairMax. Length: 0.7920 XND (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HNC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNC High PerformanceH Series (Tri-Metal)Narrowed / CoatedPair NC	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HXNC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance.001in Extra Oil Clearance / Narrowed / Coated Fitment notes — MAHLE / CLEVITE CB663HXNC High Performance.001in Extra Oil Clearance / Narrowed / CoatedH Series (Tri-Metal)Pair XNC (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB663HNDC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE CB663HNDC High PerformanceH Series (Tri-Metal)Narrowed / Doweled Connecting Rod / CoatedPair	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.2L V8	BB253J	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — ENGINETECH BB253J Set Fits: Escalade EXTOD or: Escalade Base Model or Escalade ESVOD	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	CB663A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB663A A Series (Aluminum)PairVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	CB663P	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	P Series (Tri-Metal)Pair Fitment notes — MAHLE / CLEVITE CB663P P Series (Tri-Metal)Pair Chevrolet Engine	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	CB663A8	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB663A8 A Series (Aluminum)SetVertical Oil Clearance (maximum): 0.0028	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	CB663P8	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	P Series (Tri-Metal)Set Fitment notes — MAHLE / CLEVITE CB663P8 P Series (Tri-Metal)SetVertical Oil Clearance (minimum): 0.0007	View on Amazon
SEALED POWER Popular Fits: all 2012 Escalade engines	2555CP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Overplated Copper-Lead Alloy Fitment notes — SEALED POWER 2555CP Overplated Copper-Lead Alloy 1.5800 IN Wall Thickness	View on Amazon
SEALED POWER Popular Fits: all 2012 Escalade engines	82555A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetA-Series aluminum bearings	View on Amazon
ENGINETECH Fits: 6.2L V8	BB353J	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — ENGINETECH BB353J Set 0.002 Oversized OD	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	89017573	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Standard Fitment notes — GM GENUINE 89017573 4 speed Automatic trans.Standard Fits: Escalade ESV or Escalade EXTStandardor Escalade Base Model6 speed Automatic trans.Standard	View on Amazon
ITM ENGINE COMPONENTS Fits: all 2012 Escalade engines	8B6956	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB1776A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Pair Fitment notes — MAHLE / CLEVITE CB1776A A Series (Aluminum)Pair Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CB1776A8	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE CB1776A8 A Series (Aluminum)Set Connecting Rods with Housing Bore Resized .002 IN Larger Than Stock	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	2555A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A-Series Aluminum BearingsStandard Shaft Minimum (Inch): 2.0990 In	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	82555CP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetOverplated Copper-Lead Alloy	View on Amazon

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	CR807HPNX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPNX Race bearings, BI-Metal [Alecular]Setwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	CR807HPN	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race bearings, BI-Metal [Alecular]Set Fitment notes — KING ENGINE BEARINGS CR807HPN Race bearings, BI-Metal [Alecular]SetNarrow	View on Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	11570662	🇺🇸 US 🇨🇦 CA	SINGLE USEM9X44,13	View on Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	C293CSA	🇺🇸 US	Does Not Include Cam Retainer Plate	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	CS9284	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Lower Oil Pan Gasket Not IncludedPermadry Molded Rubber Oil Pan Gasket(s) Included	View on Amazon
ULTRA-POWER Popular Fits: all 2012 Escalade engines	CS9284	🇺🇸 US 🇨🇦 CA	SetLower Oil Pan Gasket Not Included Fitment notes — ULTRA-POWER CS9284 SetLower Oil Pan Gasket Not IncludedMolded Rubber Oil Pan Gasket(s) Included	View on Amazon
AJUSA Fits: all 2012 Escalade engines	54290500	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
APEX Fits: all 2012 Escalade engines	ACS3072	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Camshaft retainer plate	View on Amazon
APEX Fits: all 2012 Escalade engines	ACS3071	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	816400	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Oil Drain Plug	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	CS92841	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Permadry Rubber Oil Pan Gasket(s) Included Fitment notes — FEL-PRO CS92841 Permadry Rubber Oil Pan Gasket(s) Included Camshaft sensor, Flow valve connector, Vacuum pump gaskets included	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	CS5975A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Recessed Bolt Holes In Camshaft Retainer Plate	View on Amazon
SKP Fits: all 2012 Escalade engines	SKCS9284	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Molded Rubber Oil Pan Gasket(s) Included	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	081012601	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Camshaft Retainer Plate	View on Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12736808	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the crankshafts that turn piston motion into rotation.

Crankshaft Main Bearing

High Performance

Brand	Part Number	Markets	Notes	Buy
KING ENGINE BEARINGS Popular Fits: all 2012 Escalade engines	MB5013XP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PmaxblackSet	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	MS2199H	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2199H High PerformanceH Series (Tri-Metal)Set Escalade Base Model or Escalade ESV	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB5013HP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Setalecular	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB5013HPX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	alecularSet Fitment notes — KING ENGINE BEARINGS MB5013HPX alecularSetwith Extra Oil Clearance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB5013XPX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetPmaxblack Fitment notes — KING ENGINE BEARINGS MB5013XPX SetPmaxblackwith Extra Oil Clearance	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB5013XPC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race bearings, TRI-Metal [Pmax Kote], coatedSet	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	MS2199HXC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance.001in Extra Oil Clearance / Coated Fitment notes — MAHLE / CLEVITE MS2199HXC High Performance.001in Extra Oil Clearance / CoatedH Series (Tri-Metal)Set (Size: Standard) Escalade Base Model or Escalade ESV (Size: Standard)	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	MS2199HC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceCoated Fitment notes — MAHLE / CLEVITE MS2199HC High PerformanceCoatedH Series (Tri-Metal)Set Escalade Base Model or Escalade ESV	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	MS2199HX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceH Series (Tri-Metal) Fitment notes — MAHLE / CLEVITE MS2199HX High PerformanceH Series (Tri-Metal)Set .001 IN Extra Oil Clearance (Size: Standard) Escalade Base Model or Escalade ESV.001 IN Extra Oil Clearance (Size: Standard)	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	BC409J	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — ENGINETECH BC409J Set Fits: Escalade EXT or: Escalade Base Model or Escalade ESV	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	MS2199A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Set	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	MS2199P	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	P Series (Tri-Metal)Set	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	89017572	🇺🇸 US 🇨🇦 CA	Standard# 3 Fitment notes — GM GENUINE 89017572 Standard# 3Thrust Bearing	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	89017571	🇺🇸 US 🇨🇦 CA	# 1,2,4,5Standard	View on Amazon
ITM ENGINE COMPONENTS Fits: all 2012 Escalade engines	5M6956	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — ITM ENGINE COMPONENTS 5M6956 Set LS2	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	MS2366A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	A Series (Aluminum)Set Fitment notes — MAHLE / CLEVITE MS2366A A Series (Aluminum)Set .020 IN Oversize Housing Bore (Size: 0.010" Undersize) Escalade Base Model.020 IN Oversize Housing Bore (Size: 0.010" Undersize)	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	7298MA	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetA-Series aluminum bearings	View on Amazon

Brand	Part Number	Markets	Notes	Buy
ENGINE PRO Fits: all 2012 Escalade engines	122199H	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Performance H SeriesSet Fitment notes — ENGINE PRO 122199H Performance H SeriesSet Escalade Base Model or Escalade ESV	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	122199HX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Performance H Series +.001 Bearing OversizeSet Fitment notes — ENGINE PRO 122199HX Performance H Series +.001 Bearing OversizeSet (Size: Standard) Escalade Base Model or Escalade ESV (Size: Standard)	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	122199HC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Performance H Series CoatedSet Fitment notes — ENGINE PRO 122199HC Performance H Series CoatedSetNitro Black Coated Performance Escalade Base Model or Escalade ESV	View on Amazon
ENGINE PRO Fits: all 2012 Escalade engines	122199HXC	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Performance H Series +.001 Bearing Oversize CoatedSet Fitment notes — ENGINE PRO 122199HXC Performance H Series +.001 Bearing Oversize CoatedSetNitro Black Coated Performance (Size: Standard) Escalade Base Model or Escalade ESV (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB5013XPCX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race bearings, TRI-Metal [Pmax Kote], coatedSet Fitment notes — KING ENGINE BEARINGS MB5013XPCX Race bearings, TRI-Metal [Pmax Kote], coatedSetwith Extra Oil Clearance (Size: Standard)	View on Amazon
KING ENGINE BEARINGS Fits: all 2012 Escalade engines	MB1328XPX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Setwith Extra Oil Clearance Fitment notes — KING ENGINE BEARINGS MB1328XPX Setwith Extra Oil ClearancePmaxblack (Size: Standard)	View on Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12556127	🇺🇸 US 🇨🇦 CA	SIDESHORT Fitment notes — GM GENUINE 12556127 SIDESHORTM8X1.25X24	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12560272	🇺🇸 US 🇨🇦 CA	M10X2X102.5BOTTOM Fitment notes — GM GENUINE 12560272 M10X2X102.5BOTTOMLONG	View on Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Main Bearing Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
VICTOR REINZ Fits: all 2012 Escalade engines	711348000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	CrankshaftCrankshaft Machining Required	View on Amazon

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface.

Crankshaft Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
NATIONAL Popular Fits: all 2012 Escalade engines	99210	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon
WJB / INMOTION PARTS Popular Fits: all 2012 Escalade engines	WS99210	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	16229	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RearWide Lip Fitment notes — FEL-PRO 16229 RearWide Lip1.156 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	16228	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RearNarrow Lip Fitment notes — FEL-PRO 16228 RearNarrow Lip0.780 (In) Sleeve LengthRequires Crankshaft Machining Due To Clearance IssuesUse with Installation tool	View on Amazon
TIMKEN Fits: 6.0L V8 ELECTRIC/GAS	KWK99210	🇺🇸 US 🇨🇦 CA	Kwik-Sleeve Fitment notes — TIMKEN KWK99210 Kwik-Sleeve Front	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	711457300	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RearWide Lip Fitment notes — VICTOR REINZ 711457300 RearWide Lip1.156 IN LengthCrankshaft Machining Required	View on Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Repair Sleeve Tool

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: all 2012 Escalade engines	16329	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear	View on Amazon

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: all 2012 Escalade engines	ABS371	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rearwith Housing Gasket	View on Amazon
APEX Popular Fits: all 2012 Escalade engines	ABS372	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rearwith Rear Main Seal Cover, Housing Gasket & Bolts	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	BS40640	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PTFE RubberIncludes Sleeve Fitment notes — FEL-PRO BS40640 PTFE RubberIncludes Sleeve Rear1 Piece	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	89060436	🇺🇸 US 🇨🇦 CA	RearReverse Lip Seal	View on Amazon
NATIONAL Popular Fits: all 2012 Escalade engines	100470	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon
TIMKEN Popular Fits: all 2012 Escalade engines	100470	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon
ACDELCO Fits: all 2012 Escalade engines	100085	🇺🇸 US 🇨🇦 CA	Gold Fitment notes — ACDELCO 100085 Gold RearSeal Only	View on Amazon
ACDELCO Fits: all 2012 Escalade engines	100470	🇺🇸 US 🇨🇦 CA	Gold Fitment notes — ACDELCO 100470 Gold FrontFluoroelastomer Material	View on Amazon
AJUSA Fits: all 2012 Escalade engines	15113900	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front53.5 x 72 x 8.5 Fitment notes — AJUSA 15113900 Front53.5 x 72 x 8.5Clockwise FrontClockwise	View on Amazon
APEX Fits: all 2012 Escalade engines	ATC3711	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Seal Only Fitment notes — APEX ATC3711 Seal Only Front	View on Amazon
APEX Fits: all 2012 Escalade engines	ABS377	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Seal Only Fitment notes — APEX ABS377 Seal Only Rear	View on Amazon
AUTOTECNICA Fits: all 2012 Escalade engines	GM1419631	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Seal, Gasket & Hardware	View on Amazon
BCA Fits: 6.0L V8 ELECTRIC/GAS	NS100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	877130	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist Fitment notes — ELRING 877130 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Left-hand Twist RearTransmission Side	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	868600	🇺🇸 US 🇨🇦 CA	Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist Fitment notes — ELRING 868600 Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand TwistFront	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	S5671	🇺🇸 US	PTFE Fitment notes — ENGINETECH S5671 PTFE Rear1 Piece	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	SK5671	🇺🇸 US	PTFE Fitment notes — ENGINETECH SK5671 PTFE Includes Housing Gasket	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	JV1657	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Carrier GasketPTFE (Polytetrafluoroethylene) Fitment notes — MAHLE / CLEVITE JV1657 Includes Carrier GasketPTFE (Polytetrafluoroethylene)Rear	View on Amazon
NATIONAL Fits: all 2012 Escalade engines	100085	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear	View on Amazon
SCHAEFFLER Fits: all 2012 Escalade engines	SS3130	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front2.85" O.D. X 0.32" Width	View on Amazon
SCHAEFFLER Fits: all 2012 Escalade engines	SS3405	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RearViton-Teflon	View on Amazon
SKF Fits: all 2012 Escalade engines	38617	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear Fitment notes — SKF 38617 Rear RearEscalade Base Model or Escalade EXT	View on Amazon
SKP Fits: all 2012 Escalade engines	SK100470	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Frontfluoroelastomer	View on Amazon
SKP Fits: 6.0L V8 ELECTRIC/GAS	SK100085	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
TIMKEN Fits: all 2012 Escalade engines	100085	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear	View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	BS40640	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ULTRA-POWER BS40640 Set RearProtective Sleeve Included To Prevent Seal Lip Damage During InstallationPtfe Rubber Seal1 Piece	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	191008001	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PTFESet Fitment notes — VICTOR REINZ 191008001 PTFESet Rear1 Piece	View on Amazon
WJB / INMOTION PARTS Fits: all 2012 Escalade engines	WS100085	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inside Diameter: 3.8580000000000001 In Fitment notes — WJB / INMOTION PARTS WS100085 Inside Diameter: 3.8580000000000001 In Rear	View on Amazon
WJB / INMOTION PARTS Fits: all 2012 Escalade engines	WS100470	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front Fitment notes — WJB / INMOTION PARTS WS100470 Front FrontEscalade ESV or Escalade EXTF	View on Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	635518	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	IMPROVED DESIGN Fitment notes — DORMAN 635518 IMPROVED DESIGN Fits: Escalade Base ModelImproved Designor Escalade ESV or Escalade EXTImproved DesignMust Use Dorman 635-000 Installation Tool or Equivalent	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12639250	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
SKP Fits: all 2012 Escalade engines	SK635518	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Bolts, Gasket, Housing, and Seal	View on Amazon

This table covers the Crankshaft Seal covers.

Crankshaft Seal Cover Tool

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	635000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	IMPROVED DESIGN	View on Amazon

This table covers the Crankshaft Seal Cover tools. This is a service tool, not a wear part — match the application in the notes.

Crankshaft Seal Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.0L V8 ELECTRIC/GAS	104560	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws Fitment notes — ELRING 104560 with Crankshaft Seal, Bolts/Screws transmission sided	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	208290	🇺🇸 US	UpperRWD	View on Amazon
ELRING Fits: 6.2L V8	948270	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12639249	🇺🇸 US 🇨🇦 CA	Color: Black, Coated Aluminum Fitment notes — GM GENUINE 12639249 Color: Black, Coated Aluminum Rear	View on Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Deactivation Delete

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8	MDK500	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include HP engine tuner for disabling the AFM in the engine control moduleThe Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters. Fitment notes — MELLING MDK500 Does Not Include HP engine tuner for disabling the AFM in the engine control moduleThe Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.The Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software.	View on Amazon
MELLING Fits: 6.2L V8	MDK500HPT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.The Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software.	View on Amazon

This table covers the kits that disable cylinder deactivation.

Cylinder Deactivation Delete Block-Off Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8	MDKP1	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Block-Off PlugContains 8 Plugs Fitment notes — MELLING MDKP1 Block-Off PlugContains 8 Plugs Use with MDK300, MDK400, and MDK500 DOD Delete KitGen 4 & 5 LS/LT DOD Block Off Plug	View on Amazon

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Deactivation Solenoid

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	917162XD	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Gaskets IncludedImproved Design	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12698755	🇺🇸 US 🇨🇦 CA	Includes Cylinder Deactivation Solenoid, Gasket, Filter, Retainer, Bolts, Cap Fitment notes — GM GENUINE 12698755 Includes Cylinder Deactivation Solenoid, Gasket, Filter, Retainer, Bolts, Cap Fits: Escalade ESV or Escalade EXTIncludes Cylinder Deactivation Solenoid, Gasket, Filter, Retainer, Bolts, Capor Escalade Base Model6 speed Automatic trans.Includes Cylinder Deactivation Solenoid, Gasket, Filter, Retainer, Bolts, Cap	View on Amazon
STANDARD MOTOR PRODUCTS Fits: all 2012 Escalade engines	CDS03	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Intermotor	View on Amazon
WELLS Fits: all 2012 Escalade engines	3N2002	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Cylinder Head

Brand	Part Number	Markets	Notes	Buy
CYLINDER HEAD EXPRESS Fits: 6.2L V8	CI530B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	New Bare Cylinder Head Casting - No Valves or Springs Fitment notes — CYLINDER HEAD EXPRESS CI530B New Bare Cylinder Head Casting - No Valves or Springs Fits: LeftCasting # 1259, 5364, 823, 821 or: RightCasting # 1259, 5364, 823, 821	View on Amazon
ENGINE PRO Fits: 6.2L V8	911567	🇺🇸 US 🇨🇦 CA	BareDoes not include Valves, Cam, or Springs Fitment notes — ENGINE PRO 911567 BareDoes not include Valves, Cam, or Springs Engine Code L-92Casting#: 364821823	View on Amazon
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	12746921	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Includes Valves Fitment notes — GM GENUINE 12746921 4 speed Automatic trans.Includes Valvesdoes not include Engine Cool Air Bleed Plug (12602048)	View on Amazon
GM GENUINE Fits: 6.2L V8	12711770	🇺🇸 US 🇨🇦 CA	Heavy Duty Head with Inconel ValvesUse with Engine Cool Air Bleed	View on Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12570326	🇺🇸 US 🇨🇦 CA		View on Amazon
PIONEER Fits: all 2012 Escalade engines	S1115	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RWD	View on Amazon
PIONEER Fits: all 2012 Escalade engines	PG525	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RWD	View on Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand	Part Number	Markets	Notes	Buy
APEX Popular Fits: all 2012 Escalade engines	AHB390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	ES72390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
ENGINETECH Fits: 6.2L V8	HB288	🇺🇸 US	Set	View on Amazon
ENGINETECH Fits: 6.2L V8	HBK288	🇺🇸 US	Set Fitment notes — ENGINETECH HBK288 Set Full Engine Set	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	19258707	🇺🇸 US 🇨🇦 CA	M11X2X100LONG	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12558840	🇺🇸 US 🇨🇦 CA	SHORTSINGLE USE Fitment notes — GM GENUINE 12558840 SHORTSINGLE USEM8X1.25X45	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	GS33449	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Cylinder Head Bolt KitSet Fitment notes — MAHLE / CLEVITE GS33449 Cylinder Head Bolt KitSetSteel	View on Amazon
SKP Fits: all 2012 Escalade engines	SKAHB389	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	141009901	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	26192PT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Permatorquemls Laserweld Technology	View on Amazon
GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS	12589227	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Head Bolt Replacement Required	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.0L V8 ELECTRIC/GAS	54445	🇺🇸 US 🇨🇦 CA	Multi-Layered Steel	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8	54660	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Multi-Layered Steel	View on Amazon
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	10238600	🇺🇸 US 🇨🇦 CA	Multi Layered Steel Fitment notes — AJUSA 10238600 Multi Layered Steel 102.5 Bore Diameter	View on Amazon
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	52618800	🇺🇸 US 🇨🇦 CA	Left	View on Amazon
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	52618700	🇺🇸 US 🇨🇦 CA	Right	View on Amazon
AJUSA Fits: 6.2L V8	10263300	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Multi Layered Steel Fitment notes — AJUSA 10263300 Multi Layered Steel 104 Bore Diameter	View on Amazon
APEX Fits: all 2012 Escalade engines	AHG390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	069404	🇺🇸 US 🇨🇦 CA	Diameter [MM]: 102,9Material: Multi-Layer Steel (MLS)	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	043110	🇺🇸 US 🇨🇦 CA	Material: Metalofl	View on Amazon
ENGINE PRO Fits: 6.2L V8	2812610046	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Number of Layers: 5 Fitment notes — ENGINE PRO 2812610046 Number of Layers: 5 Escalade Base Model	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	HC364A	🇺🇸 US 🇨🇦 CA	Multi-Layer Steel	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	PHC376A	🇺🇸 US 🇨🇦 CA	Fire Seal Premium Head MLS Gasket	View on Amazon
GM GENUINE Fits: 6.2L V8	12610046	🇺🇸 US 🇨🇦 CA	Cylinder Bore Diameter: 4.11 In Fitment notes — GM GENUINE 12610046 Cylinder Bore Diameter: 4.11 In HEAD BOLT REPLACEMENT REQUIRED	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	611040400	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Configuration: ONE-Piece	View on Amazon
VICTOR REINZ Fits: 6.0L V8 ELECTRIC/GAS	613654500	🇺🇸 US 🇨🇦 CA	Thick: 0.0500 In	View on Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	C376HSA	🇺🇸 US 🇨🇦 CA	with MLS head gaskets Fitment notes — ENGINETECH C376HSA with MLS head gaskets Engine VIN code K,YEngines with Rectangular Intake Ports Escalade ESV or Escalade EXTEngines with Rectangular Intake Ports	View on Amazon
FEL-PRO Popular Fits: 6.0L V8 ELECTRIC/GAS	HS26192PT8	🇺🇸 US 🇨🇦 CA	Perma Dry Molded Rubber Valve Cover Gasket(s) IncludedIncludes Valve Stem Seals	View on Amazon
FEL-PRO Popular Fits: 6.2L V8	HS26192PT6	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals	View on Amazon
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	52618600	🇺🇸 US 🇨🇦 CA	Complete Set	View on Amazon
APEX Fits: 6.0L V8 ELECTRIC/GAS	AHS3154	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 6.2L V8	AHS3151	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ENGINE PRO Fits: 6.2L V8	3626192PT6	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ENGINETECH Fits: 6.2L V8	C376HSAAWB	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Head Boltswith MLS head gaskets Fitment notes — ENGINETECH C376HSAAWB Includes Head Boltswith MLS head gaskets Engines with Rectangular Intake Ports	View on Amazon
FEL-PRO Fits: 6.0L V8 ELECTRIC/GAS	HS26192PT8VK	🇺🇸 US 🇨🇦 CA	Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals Fitment notes — FEL-PRO HS26192PT8VK Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Permadryplus Intake Manifold Gaskets, Valve Stem Seals Head bolt replacement recommended	View on Amazon
FEL-PRO Fits: 6.2L V8	HS26192BPT6VK	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Head BoltsIncludes Valve Stem Seals Fitment notes — FEL-PRO HS26192BPT6VK Includes Head BoltsIncludes Valve Stem Seals Head bolt replacement recommended	View on Amazon
ITM ENGINE COMPONENTS Fits: 6.0L V8 ELECTRIC/GAS	0914603	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: 6.0L V8 ELECTRIC/GAS	HS54660D	🇺🇸 US 🇨🇦 CA	Includes Valve Stem Seals	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	HS54660C	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Valve Stem Seals	View on Amazon
ULTRA-POWER Fits: 6.0L V8 ELECTRIC/GAS	HS26192PT8	🇺🇸 US 🇨🇦 CA	Head Bolts Not IncludedHead Bolt Replacement Recommended Fitment notes — ULTRA-POWER HS26192PT8 Head Bolts Not IncludedHead Bolt Replacement RecommendedIncludes Valve Stem Seals, Molded Rubber Valve Cover Gasket(s), Intake Manifold Gaskets, Premium Valve Stem Seals	View on Amazon
ULTRA-POWER Fits: 6.2L V8	HS26192PT6	🇺🇸 US 🇨🇦 CA	Head Bolts Not IncludedHead Bolt Replacement Recommended Fitment notes — ULTRA-POWER HS26192PT6 Head Bolts Not IncludedHead Bolt Replacement RecommendedIncludes Molded Rubber Valve Cover Gasket(s), Premium Valve Stem Seals	View on Amazon
VICTOR REINZ Fits: 6.0L V8 ELECTRIC/GAS	021102901	🇺🇸 US 🇨🇦 CA		View on Amazon
VICTOR REINZ Fits: 6.2L V8	021009901	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	11562126	🇺🇸 US 🇨🇦 CA	Cup, 32.03X7.88X1.27, S30400 Stainless Steel Per SAE J405	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	11610259	🇺🇸 US 🇨🇦 CA	M12X1.5X21.2Hex, Socket	View on Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Cylinder Head Spacer Shim

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	CHS1068	🇺🇸 US	0.020 Thick	View on Amazon
SBI Fits: all 2012 Escalade engines	2302187	🇺🇸 US 🇨🇦 CA	New Height - 4.732	View on Amazon

This table covers the Cylinder Head Spacer shims.

Cylinder Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8	CSL359F	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Aluminum Cylinder Block OnlySemi Finished Inside Diameter	View on Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Block Heater

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12586687	🇺🇸 US 🇨🇦 CA	Engine Block Heater (K05)	View on Amazon
KAT'S HEATERS Fits: all 2012 Escalade engines	11484	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Freeze Plug Heater Fitment notes — KAT'S HEATERS 11484 Freeze Plug Heater Threaded Electrical Plug End28mm400 WattsEasiest Mounting Location: Front LeftThreadedOEM Thermostatically Controlled Heat Easiest Mounting Location: Front LeftThreadedThreaded Electrical Plug End28mm400 Watts	View on Amazon
KAT'S HEATERS Fits: 6.0L V8 ELECTRIC/GAS	11811	🇺🇸 US 🇨🇦 CA	Engine Heater Cartridge Fitment notes — KAT'S HEATERS 11811 Engine Heater Cartridge Easiest Mounting Location: Front Left0.885400 Watts	View on Amazon
KAT'S HEATERS Fits: 6.2L V8	28510	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Heater Replacement Cord Fitment notes — KAT'S HEATERS 28510 Engine Heater Replacement Cord 120 Volts18 Gauge3 Wire3 Prong5 ft.with Thermostat	View on Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Cover Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: all 2012 Escalade engines	795390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon

This table covers the Engine Cover bolts.

Engine Cover Grommet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12737359	🇺🇸 US 🇨🇦 CA	Rear12.0 Diameter X 2.4 Deep	View on Amazon
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	12596442	🇺🇸 US 🇨🇦 CA	22.2X28.1	View on Amazon
GM GENUINE Fits: 6.2L V8	15872173	🇺🇸 US 🇨🇦 CA	24X22	View on Amazon

This table covers the Engine Cover grommets.

Engine Cover Retainer / Clip

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	15858430	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Engine Cover retainers and clips.

Engine Kit Gasket Set

Brand	Part Number	Markets	Notes	Buy
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	50554800	🇺🇸 US 🇨🇦 CA		View on Amazon
AJUSA Fits: 6.2L V8	50554000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	802671	🇺🇸 US 🇨🇦 CA	without cylinder head gasket,without valve stem seals,without crankshaft sealwith Oil Sump Gasket	View on Amazon
ENGINETECH Fits: 6.2L V8	C376K1	🇺🇸 US	Does Not Include Cam Retainer Platewith MLS head gaskets Fitment notes — ENGINETECH C376K1 Does Not Include Cam Retainer Platewith MLS head gaskets Engines with Rectangular Intake Ports	View on Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.0L V8 ELECTRIC/GAS	V4371	🇺🇸 US 🇨🇦 CA	Gasoline or FLEX Fuel.3130 Stem Fitment notes — ENGINETECH V4371 Gasoline or FLEX Fuel.3130 Stem1.551" Head23-8N stainless	View on Amazon
GM GENUINE Popular Fits: 6.2L V8	12582719	🇺🇸 US 🇨🇦 CA	Material: Stainless Steel Fitment notes — GM GENUINE 12582719 Material: Stainless Steel Standard	View on Amazon
MELLING Popular Fits: 6.0L V8 ELECTRIC/GAS	V1935	🇺🇸 US 🇨🇦 CA	OE Replacement	View on Amazon
ENGINE PRO Fits: 6.2L V8	0113042	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730128	🇺🇸 US 🇨🇦 CA	High Performance.3134" Stem Fitment notes — ENGINETECH 730128 High Performance.3134" Stem1.571" Head4.915" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730138	🇺🇸 US 🇨🇦 CA	High Performance.3134" Stem Fitment notes — ENGINETECH 730138 High Performance.3134" Stem1.600" Head4.915" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
MAHLE / CLEVITE Fits: 6.0L V8 ELECTRIC/GAS	2114172	🇺🇸 US 🇨🇦 CA	1.551 IN Head Diameter0.3134 IN Stem Diameter Fitment notes — MAHLE / CLEVITE 2114172 1.551 IN Head Diameter0.3134 IN Stem Diameter105.50mm Length1 Lock Groove Valve	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	V1935S	🇺🇸 US 🇨🇦 CA	STELLITE	View on Amazon
MELLING Fits: 6.2L V8	V3042	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
QUALCAST Fits: 6.0L V8 ELECTRIC/GAS	101935	🇺🇸 US 🇨🇦 CA	1.550 Head Diameter. 0.3136 Stem	View on Amazon
QUALCAST Fits: 6.0L V8 ELECTRIC/GAS	101935S	🇺🇸 US 🇨🇦 CA	1.550 Head Diameter. Stellite. LPG.	View on Amazon
QUALCAST Fits: 6.2L V8	1013042	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	1.593 Head Diameter. 0.3136 Stem Diameter.	View on Amazon
SBI Fits: 6.0L V8 ELECTRIC/GAS	01935	🇺🇸 US 🇨🇦 CA		View on Amazon
SBI Fits: 6.2L V8	13042	🇺🇸 US 🇨🇦 CA	Stainless Steel	View on Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Expansion Plug

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	PK293B	🇺🇸 US 🇨🇦 CA		View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	PK827B	🇺🇸 US	Brass Fitment notes — ENGINETECH PK827B Brass Cylinder Head Plug Kit	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	MPE901BR	🇺🇸 US 🇨🇦 CA	BrassCylinder Head Plug Kit	View on Amazon
MELLING Fits: 6.2L V8	MPE900BR	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	BrassOil Galley Plug Not Included Fitment notes — MELLING MPE900BR BrassOil Galley Plug Not Included Cylinder Block Kit	View on Amazon
MELLING Fits: 6.2L V8	MPE900BRGP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Oil Galley PlugBrass Fitment notes — MELLING MPE900BRGP Includes Oil Galley PlugBrass Cylinder Block Kit	View on Amazon
PIONEER Fits: 6.2L V8	PE496	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Steel	View on Amazon
PIONEER Fits: 6.2L V8	PE496B	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Brass	View on Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Fuel Pump Camshaft Follower

Brand	Part Number	Markets	Notes	Buy
STANDARD MOTOR PRODUCTS Fits: 6.2L V8	GDF103	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Escalade Base Model	View on Amazon

This table covers the followers that drive a mechanical fuel pump off the camshaft.

Harmonic Balancer

Economy

Brand	Part Number	Markets	Notes	Buy
SKP Fits: all 2012 Escalade engines	SK594209	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Double Serpentine, Groove Quantity 6 and 4Depth 4-3/8" Fitment notes — SKP SK594209 Double Serpentine, Groove Quantity 6 and 4Depth 4-3/8"Outer Diameter: 7-9/16"Inner Diameter: 1-1/2"	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
DAYCO Fits: all 2012 Escalade engines	PBU1190SS25	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Race Performance 25% Underdrive	View on Amazon
DAYCO Fits: all 2012 Escalade engines	PBO81190SC10	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SC Performance 8 Rib 10% Overdrive	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: all 2012 Escalade engines	594209	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Double SerpentineDiameter Fitment notes — DORMAN 594209 Double SerpentineDiameter7.72"Width: 4.75"Weight (lbs.): 10.4lbs	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	19300488	🇺🇸 US 🇨🇦 CA		View on Amazon
ATP Fits: all 2012 Escalade engines	102171	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Double Serpentine	View on Amazon
DAYCO Fits: all 2012 Escalade engines	PB1190N	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Premium	View on Amazon
PIONEER Fits: all 2012 Escalade engines	DA3510	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Groove Quantity 6 or 4Double Serpentine Fitment notes — PIONEER DA3510 Groove Quantity 6 or 4Double SerpentineOuter Diameter: 7.732 In	View on Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	917139	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Escalade Base Model	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12557840	🇺🇸 US 🇨🇦 CA	M16X2.0X103	View on Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	12638038	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8	12597600	🇺🇸 US 🇨🇦 CA	without CNG TUBESwithout THROTTLE BODY	View on Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12575384	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.	View on Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12610052	🇺🇸 US 🇨🇦 CA	Includes Cover, Grommet, Insulator Fitment notes — GM GENUINE 12610052 Includes Cover, Grommet, Insulator Rear	View on Amazon
GM GENUINE Fits: 6.2L V8	12625893	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Intake Manifold covers.

Intake Manifold Gasket

Premium

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.0L V8 ELECTRIC/GAS	MS98016T	🇺🇸 US 🇨🇦 CA	SetIncludes Perma DryPlus Intake Manifold Gaskets Fitment notes — FEL-PRO MS98016T SetIncludes Perma DryPlus Intake Manifold Gaskets Lower	View on Amazon
VICTOR REINZ Fits: 6.0L V8 ELECTRIC/GAS	111056401	🇺🇸 US 🇨🇦 CA	Maxdry STL®Improved Design Fitment notes — VICTOR REINZ 111056401 Maxdry STL®Improved DesignSet Lower	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.0L V8 ELECTRIC/GAS	IC293A	🇺🇸 US	Engine VIN Code 5,H,J,N,U	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.0L V8 ELECTRIC/GAS	MS16340	🇺🇸 US 🇨🇦 CA	Contains Premium Grade Intake Manifold GasketsMolded Rubber	View on Amazon
ULTRA-POWER Popular Fits: 6.0L V8 ELECTRIC/GAS	MS96587	🇺🇸 US 🇨🇦 CA	SetIncludes OEM design intake manifold gaskets Fitment notes — ULTRA-POWER MS96587 SetIncludes OEM design intake manifold gaskets Lower	View on Amazon
AJUSA Fits: 6.0L V8 ELECTRIC/GAS	13288600	🇺🇸 US 🇨🇦 CA		View on Amazon
APEX Fits: 6.0L V8 ELECTRIC/GAS	AMS3891	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AMS3891 Set Lifter Valley Cover Set TypePerimeter seal only	View on Amazon
APEX Fits: 6.0L V8 ELECTRIC/GAS	AMS3850	🇺🇸 US 🇨🇦 CA	Set	View on Amazon
APEX Fits: 6.0L V8 ELECTRIC/GAS	AMS3851P	🇺🇸 US 🇨🇦 CA	Set Fitment notes — APEX AMS3851P Set IMPROVED DESIGN	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	759900	🇺🇸 US 🇨🇦 CA	Adjuster Seal	View on Amazon
FEL-PRO Fits: 6.0L V8 ELECTRIC/GAS	MS96857	🇺🇸 US 🇨🇦 CA	Valley Gasket	View on Amazon
FEL-PRO Fits: 6.0L V8 ELECTRIC/GAS	MS96587	🇺🇸 US 🇨🇦 CA	Set Fitment notes — FEL-PRO MS96587 Set Lower	View on Amazon
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	89060413	🇺🇸 US 🇨🇦 CA	Set Fitment notes — GM GENUINE 89060413 Set 4 speed Automatic trans.does not include EGR Valve Pipe Gasket	View on Amazon
MAHLE / CLEVITE Fits: 6.0L V8 ELECTRIC/GAS	MS19501	🇺🇸 US 🇨🇦 CA	Molded Rubber Fitment notes — MAHLE / CLEVITE MS19501 Molded Rubber Cylinder Deactivation, Lifter Valley Gasket Type, Perimeter Only	View on Amazon
MAHLE / CLEVITE Fits: 6.0L V8 ELECTRIC/GAS	MS20135	🇺🇸 US 🇨🇦 CA	SetMolded Rubber / Steel	View on Amazon
ULTRA-POWER Fits: 6.0L V8 ELECTRIC/GAS	MS98016T	🇺🇸 US 🇨🇦 CA	SetIncludes Intake Manifold Gaskets Fitment notes — ULTRA-POWER MS98016T SetIncludes Intake Manifold Gaskets Lower	View on Amazon
VICTOR REINZ Fits: 6.0L V8 ELECTRIC/GAS	111032001	🇺🇸 US 🇨🇦 CA	Lowerwithout Displacement On Demand (DOD) Type Solenoid Fitment notes — VICTOR REINZ 111032001 Lowerwithout Displacement On Demand (DOD) Type SolenoidValley Pan	View on Amazon
VICTOR REINZ Fits: 6.0L V8 ELECTRIC/GAS	111063101	🇺🇸 US 🇨🇦 CA	Set Fitment notes — VICTOR REINZ 111063101 Set Lower	View on Amazon

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: 6.2L V8	MS97126	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — FEL-PRO MS97126 Set Lower	View on Amazon
GM GENUINE Popular Fits: 6.2L V8	19207929	🇺🇸 US 🇨🇦 CA	Set Fitment notes — GM GENUINE 19207929 Set Fits: Escalade Base Model6 speed Automatic trans.or Escalade ESV or Escalade EXT	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8	MS19598	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetMolded Rubber	View on Amazon
AJUSA Fits: 6.2L V8	13298000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
APEX Fits: 6.2L V8	AMS3891	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — APEX AMS3891 Set Lifter Valley Cover Set TypePerimeter seal only	View on Amazon
APEX Fits: 6.2L V8	AMS3902	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	EVC0448	🇺🇸 US 🇨🇦 CA	Valley Pan Fitment notes — ENGINETECH EVC0448 Valley Pan Escalade ESV or Escalade EXTValley Pan	View on Amazon
FEL-PRO Fits: 6.2L V8	MS96857	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Valley Gasket	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	MS19501	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Molded Rubber Fitment notes — MAHLE / CLEVITE MS19501 Molded Rubber Cylinder Deactivation, Lifter Valley Gasket Type, Perimeter Only	View on Amazon
VICTOR REINZ Fits: 6.2L V8	111032001	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Lowerwithout Displacement On Demand (DOD) Type Solenoid Fitment notes — VICTOR REINZ 111032001 Lowerwithout Displacement On Demand (DOD) Type SolenoidValley Pan	View on Amazon
VICTOR REINZ Fits: 6.2L V8	111036501	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — VICTOR REINZ 111036501 Set LowerRectangular ports	View on Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.0L V8 ELECTRIC/GAS	878650	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS	12627971	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.	View on Amazon
GM GENUINE Popular Fits: 6.2L V8	12627970	🇺🇸 US 🇨🇦 CA	Original Equipment Replacement: YesValve Material: Stainless Steel	View on Amazon
MELLING Popular Fits: 6.0L V8 ELECTRIC/GAS	V3244	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Popular Fits: 6.2L V8	V3240	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Escalade Base Model or Escalade ESV	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730108	🇺🇸 US 🇨🇦 CA	High Performance.3138" Stem Fitment notes — ENGINETECH 730108 High Performance.3138" Stem2.020" Head4.900" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730148	🇺🇸 US 🇨🇦 CA	High Performance.3135" stem Fitment notes — ENGINETECH 730148 High Performance.3135" stem2.165" Head4.900" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730118	🇺🇸 US 🇨🇦 CA	High Performance.3138" Stem Fitment notes — ENGINETECH 730118 High Performance.3138" Stem2.055" Head4.900" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	730098	🇺🇸 US 🇨🇦 CA	High Performance.3138" Stem Fitment notes — ENGINETECH 730098 High Performance.3138" Stem2.000" Head4.900" OAL0.170" Tip to Top of GrooveEV8 stainlessUndercut stemSwirl polished	View on Amazon
ENGINETECH Fits: 6.2L V8	V4450	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Escalade Base Model.3135 stem Fitment notes — ENGINETECH V4450 Fits: Escalade Base Model.3135 stem2.165 Heador Escalade EXT.3135 stem2.165 Head	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	2114574	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
QUALCAST Fits: 6.0L V8 ELECTRIC/GAS	1013244	🇺🇸 US 🇨🇦 CA	2.000 Head Dia. 0.3135 Stem. 4.870 OAL. Nitrided	View on Amazon
QUALCAST Fits: 6.2L V8	1013240	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	2.165 Head Dia. 4.870 OAL. with Automatic Transmission 0.204 Tip to Groove	View on Amazon
SBI Fits: 6.0L V8 ELECTRIC/GAS	13244	🇺🇸 US 🇨🇦 CA		View on Amazon
SBI Fits: 6.2L V8	13240	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Economy

Brand	Part Number	Markets	Notes	Buy
SKP Popular Fits: all 2012 Escalade engines	SKM3211	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Front Right Fitment notes — SKP SKM3211 Fits: Front Right or: Front Left	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
DEA / MARMON RIDE CONTROL Popular Fits: all 2012 Escalade engines	A5365	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Heat Shield Fitment notes — DEA / MARMON RIDE CONTROL A5365 Includes Heat Shield Fits: Front Right or: Front Left	View on Amazon
ANCHOR Fits: all 2012 Escalade engines	3211	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	without Heat Shield Fitment notes — ANCHOR 3211 without Heat Shield Fits: Front LeftReuse OE Heat ShieldReuse OE BracketHydraulic or: Front RightReuse OE Heat ShieldReuse OE BracketHydraulic	View on Amazon
ANCHOR Fits: all 2012 Escalade engines	3484	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Front LeftHYDRAULIC Fitment notes — ANCHOR 3484 Fits: Front LeftHYDRAULICComplete Assembly or: Front RightHydraulicComplete Assembly	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	15854941	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Right Fitment notes — GM GENUINE 15854941 4 speed Automatic trans.Right or: Left RWDEscalade Base Model6 speed Automatic trans.Right	View on Amazon
GM GENUINE Fits: 6.2L V8	15854939	🇺🇸 US 🇨🇦 CA	Sold Individually Fitment notes — GM GENUINE 15854939 Sold Individually Fits: AWDEscalade Base Model6 speed Automatic trans.Right and Leftor AWDEscalade ESVRight and Left	View on Amazon
PIONEER Fits: all 2012 Escalade engines	613211	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Front RightInsert only Fitment notes — PIONEER 613211 Fits: Front RightInsert only or: Front LeftInsert only Fits: Front LeftEscalade Base ModelInsert Only or: Front RightEscalade Base ModelInsert Only	View on Amazon
PIONEER Fits: all 2012 Escalade engines	605365	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Front RightCOMPLETE ASSEMBLY Fitment notes — PIONEER 605365 Fits: Front RightCOMPLETE ASSEMBLY or: Front LeftComplete Assembly Fits: Front LeftEscalade Base ModelCOMPLETE ASSEMBLY or: Front LeftEscalade EXTCOMPLETE ASSEMBLY or: Front LeftEscalade ESVBase Model or Luxury or Platinum or PremiumCOMPLETE ASSEMBLY or: Front RightBase Model or Luxury or Platinum or PremiumCOMPLETE ASSEMBLY	View on Amazon
WESTAR Fits: all 2012 Escalade engines	EM5583	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Heat Shield Fitment notes — WESTAR EM5583 Does Not Include Heat Shield Front	View on Amazon
WESTAR Fits: all 2012 Escalade engines	EM5583G	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Gold Line Fitment notes — WESTAR EM5583G Gold Line Front	View on Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	11588273	🇺🇸 US 🇨🇦 CA	To Frame Bracket10MMX1.5X40MM Fitment notes — GM GENUINE 11588273 To Frame Bracket10MMX1.5X40MMSupport Bracket Bolt	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	11517639	🇺🇸 US 🇨🇦 CA	To Frame Bracket12X1.75X44,35THD Fitment notes — GM GENUINE 11517639 To Frame Bracket12X1.75X44,35THDSupport Bracket Bolt	View on Amazon

This table covers the Motor Mount bolts.

Motor Mount Kit

Brand	Part Number	Markets	Notes	Buy
SKP Popular Fits: 6.2L V8	SKM3060K	🇺🇸 US	RWDContains: SKM2811 (Trans), 2 x SKM3211 (Front Left and Front Right)	View on Amazon
SKP Popular Fits: all 2012 Escalade engines	SKM3061K	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	AWDContains: 2 x SKM3211 (Front Left and Front Right), SKMA2638 (Trans) Fitment notes — SKP SKM3061K AWDContains: 2 x SKM3211 (Front Left and Front Right), SKMA2638 (Trans) Contains: 2 x SKM3211 (Front Left and Front Right), SKMA2638 (Trans)	View on Amazon
ANCHOR Fits: all 2012 Escalade engines	300002	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Reuse OE BracketReuse OE Heat Shields Fitment notes — ANCHOR 300002 Reuse OE BracketReuse OE Heat ShieldsNew Style AWDReuse OE BracketReuse OE Heat Shields	View on Amazon
ANCHOR Fits: all 2012 Escalade engines	300004	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Engine Mount Complete AssemblyNew Style Fitment notes — ANCHOR 300004 with Engine Mount Complete AssemblyNew Style AWDwith Engine Mount Complete Assembly	View on Amazon
ANCHOR Fits: 6.2L V8	300003	🇺🇸 US	RWDReuse OE Bracket Fitment notes — ANCHOR 300003 RWDReuse OE BracketReuse OE Heat Shields	View on Amazon
ANCHOR Fits: 6.2L V8	300005	🇺🇸 US	RWDwith Engine Mount Complete Assembly	View on Amazon
DEA / MARMON RIDE CONTROL Fits: all 2012 Escalade engines	MK5010	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes: 1 X A2638 (Trans.), 2 X A5365 (Front Left+Right) Fitment notes — DEA / MARMON RIDE CONTROL MK5010 Includes: 1 X A2638 (Trans.), 2 X A5365 (Front Left+Right) AWD	View on Amazon
DEA / MARMON RIDE CONTROL Fits: 6.2L V8	MK5009	🇺🇸 US	Includes: 1 X A2811 (Trans.), 2 X A5365 (Front Left+Right) Fitment notes — DEA / MARMON RIDE CONTROL MK5009 Includes: 1 X A2811 (Trans.), 2 X A5365 (Front Left+Right) RWD	View on Amazon
WESTAR Fits: 6.2L V8	ETK005	🇺🇸 US	RWD	View on Amazon
WESTAR Fits: 6.2L V8	ETK006	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	AWD	View on Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 0W-30, SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy. Both engines share the same viscosities. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.

Full Synthetic

Brand	Part Number	Markets	Notes	Buy
LIQUI MOLY Popular Fits: all 2012 Escalade engines	20138	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Special Tec AA 5W-305 Liter	View on Amazon
LIQUI MOLY Popular Fits: all 2012 Escalade engines	20228	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Molygen New Generation 5W-305 Liter	View on Amazon
MOBIL Popular Fits: all 2012 Escalade engines	125195	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Full Synthetic 5W-30Mobil Full Synthetic Fitment notes — MOBIL 125195 Full Synthetic 5W-30Mobil Full SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Popular Fits: all 2012 Escalade engines	124315	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	5W-30Mobil 1 Advanced Fitment notes — MOBIL 124315 5W-30Mobil 1 AdvancedFull SyntheticSAE 5W-301 Quart	View on Amazon
VALVOLINE Popular Fits: all 2012 Escalade engines	VV955	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Advanced Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
LIQUI MOLY Fits: all 2012 Escalade engines	20136	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Special Tec AA 5W-301 Liter	View on Amazon
LIQUI MOLY Fits: all 2012 Escalade engines	20226	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Molygen New Generation 5W-301 Liter	View on Amazon
LUCAS OIL Fits: all 2012 Escalade engines	10049	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt	View on Amazon
LUCAS OIL Fits: all 2012 Escalade engines	18005	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Full Synthetic Motor Oil SAE 5W-306 Gallon	View on Amazon
LUCAS OIL Fits: all 2012 Escalade engines	18008	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Full Synthetic Motor Oil SAE 0W-306 Gallon	View on Amazon
MOBIL Fits: all 2012 Escalade engines	112627	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Performance 5W-30Mobil 1 Extended Performance Fitment notes — MOBIL 112627 Extended Performance 5W-30Mobil 1 Extended PerformanceFull SyntheticSAE 5W-301 Quart	View on Amazon
MOBIL Fits: all 2012 Escalade engines	124595	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Truck & SUV 5W-30Mobil 1 Truck & SUV Fitment notes — MOBIL 124595 Truck & SUV 5W-30Mobil 1 Truck & SUVFull SyntheticSAE 5W-301 Quart	View on Amazon
PENTOSIN Fits: all 2012 Escalade engines	8044214	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	5W-30-Pentospeed-DEXOS1 GEN31 Liter Fitment notes — PENTOSIN 8044214 5W-30-Pentospeed-DEXOS1 GEN31 Liter For Temperature Above -20 F	View on Amazon
PENTOSIN Fits: all 2012 Escalade engines	8044216	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	5W-30-Pentospeed-DEXOS1 GEN35 Liters Fitment notes — PENTOSIN 8044216 5W-30-Pentospeed-DEXOS1 GEN35 Liters For Temperature Above -20 F	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	891678	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Protection Full Synthetic SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	904564	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Restore & Protect Full Synthetic SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	891670	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	904566	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Restore & Protect Full Synthetic SAE 5W-305 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	881164	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart	View on Amazon

High Mileage (>75,000 Miles)

Brand	Part Number	Markets	Notes	Buy
MOBIL Fits: all 2012 Escalade engines	123842	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Performance High Mileage 5W-30Synthetic Fitment notes — MOBIL 123842 Extended Performance High Mileage 5W-30Synthetic1 Quart	View on Amazon
MOBIL Fits: all 2012 Escalade engines	103535	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Mileage 10W-30Mobil 1 High Mileage Fitment notes — MOBIL 103535 High Mileage 10W-30Mobil 1 High MileageFull SyntheticSAE 10W-301 Quart	View on Amazon
MOBIL Fits: all 2012 Escalade engines	103767	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Mileage 5W-30Mobil 1 High Mileage Fitment notes — MOBIL 103767 High Mileage 5W-30Mobil 1 High MileageFull SyntheticSAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	VV179	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart	View on Amazon
VALVOLINE Fits: all 2012 Escalade engines	881169	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart	View on Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	72435	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Oval Port	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	72462	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Center Tubewith Dual Round Port	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	15203889	🇺🇸 US 🇨🇦 CA	Configuration: ONE Piece Fitment notes — GM GENUINE 15203889 Configuration: ONE Piece Engine Oil Cooling System (KC4)	View on Amazon
APEX Fits: all 2012 Escalade engines	AOM6016	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oval Port	View on Amazon
APEX Fits: all 2012 Escalade engines	AOM6015	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Dual round port	View on Amazon
DORMAN Fits: all 2012 Escalade engines	66219	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hybrid PlatinumSeals Two Pipes Fitment notes — DORMAN 66219 Hybrid PlatinumSeals Two Pipes Seals Two Pipes	View on Amazon
DORMAN Fits: all 2012 Escalade engines	66218	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	853210	🇺🇸 US 🇨🇦 CA	Material: Metaloseal	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12611384	🇺🇸 US 🇨🇦 CA	Use with 11588714 Bolt QTY 2Exc. Engine Oil Cooling System (KC4) Fitment notes — GM GENUINE 12611384 Use with 11588714 Bolt QTY 2Exc. Engine Oil Cooling System (KC4)Oil Pan Cover Gasket Fits: Escalade ESV or Escalade EXTUse with 11588714 Bolt-QTY 2Oil Pan Cover Gasketor Escalade Base Model6 speed Automatic trans.Use with 11588714 Bolt-QTY 2Oil Pan Cover Gasket	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	B31867	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Beaded Steel Fitment notes — MAHLE / CLEVITE B31867 Beaded Steel Oval Port	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	B31872	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Oil Cooler GasketMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE B31872 Engine Oil Cooler GasketMetal with Molded Rubber Dual round port	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	711350900	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Replaces OE Part Number(s) 12593252, 12611384with Oval Ports	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	711351000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	CenterReplaces OE Part Number(s) 12561710 Fitment notes — VICTOR REINZ 711351000 CenterReplaces OE Part Number(s) 12561710with Dual Round Ports	View on Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Cooler Line

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	625209	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inlet and Outlet Assembly	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	84828848	🇺🇸 US 🇨🇦 CA	Regulation Pfoa: Product contains Perfluorooctanoic acid (Pfoa): Not For import into European Union (EU) Fitment notes — GM GENUINE 84828848 Regulation Pfoa: Product contains Perfluorooctanoic acid (Pfoa): Not For import into European Union (EU) Engine Oil Cooling System (KC4)	View on Amazon
SKP Fits: all 2012 Escalade engines	SK625209	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inlet and Outlet Assembly	View on Amazon
SUNSONG Fits: all 2012 Escalade engines	5801032	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inlet and Outlet Assembly	View on Amazon

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Oil Cooler Line Connector

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	800622	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	1/2"	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	23378668	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the harness connectors at the Oil Cooler Line. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Cooler Mounting Kit

Brand	Part Number	Markets	Notes	Buy
HAYDEN Fits: all 2012 Escalade engines	238	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rubber Block Mounting Kit for Heavy Duty Oil Cooler	View on Amazon
HAYDEN Fits: all 2012 Escalade engines	153	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Metal Mounting Bracket Kit for Heavy Duty Oil Cooler	View on Amazon

This table covers the Oil Cooler Mounting kits.

Oil Cooler Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.2L V8	B17840	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	72435	🇺🇸 US 🇨🇦 CA	Oval Port	View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	72462	🇺🇸 US 🇨🇦 CA	with Dual Round PortCenter Tube	View on Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Dipstick / Tube

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12609269	🇺🇸 US 🇨🇦 CA	Tube OnlyIncludes seal	View on Amazon
DORMAN Fits: all 2012 Escalade engines	917433	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Tube Only	View on Amazon
DORMAN Fits: all 2012 Escalade engines	917307	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Dipstick Only	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12622055	🇺🇸 US 🇨🇦 CA	Dipstick Only Fitment notes — GM GENUINE 12622055 Dipstick Only with O-Ring742.8mm	View on Amazon
SKP Fits: all 2012 Escalade engines	SK917433	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Tube Only	View on Amazon

This table covers the Oil Dipstick tubes.

Oil Dipstick / Tube Seal

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.0L V8 ELECTRIC/GAS	584210	🇺🇸 US 🇨🇦 CA	Inner Diameter [MM]: 6,07	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	73889	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	24504031	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Single Use Fitment notes — GM GENUINE 24504031 4 speed Automatic trans.Single Use6.07 ID1.78 Diameter Single Use6.07 ID1.78 Diameter	View on Amazon

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: all 2012 Escalade engines	090175	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Integrated GasketM12 x 1.75 Thread	View on Amazon

Twist Drain

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	092018	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Thread Size: M12-1.75Twist Style	View on Amazon

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: all 2012 Escalade engines	090034	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	M12 x 1.75 Thread Fitment notes — DORMAN 090034 M12 x 1.75 Thread Gasket Included	View on Amazon
AGS Fits: all 2012 Escalade engines	ODP00009	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	M12x1.75	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	823400	🇺🇸 US	with Seal RingBolt Head-/Nut Design: Male Hex Fitment notes — ELRING 823400 with Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,75x17 RWD	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	11562588	🇺🇸 US 🇨🇦 CA	with SealExc. Magnet Fitment notes — GM GENUINE 11562588 with SealExc. Magnetwith Hex HeadM12X1.75X25	View on Amazon
VAICO Fits: all 2012 Escalade engines	V400755	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Thread Size: M 12 X 1,75Includes Gasket	View on Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	70820	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rubber Fitment notes — FEL-PRO 70820 Rubber Dished Washer0.410 (in) Inside Diameter x 0.820 (in) Outside Diameter	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	12616850	🇺🇸 US 🇨🇦 CA	Diameter 19.39	View on Amazon
DORMAN Fits: all 2012 Escalade engines	097119	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rubber Gasket Fitment notes — DORMAN 097119 Rubber Gasket M12 Drain Plug Escalade Base Model or Escalade EXTM12 Drain Plug	View on Amazon
DORMAN Fits: all 2012 Escalade engines	97119	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rubber GasketRubber Fitment notes — DORMAN 97119 Rubber GasketRubberSizeM12, 7/16"Inside Dia: 0.448"/11.38mmOutside Dia.: 0.811"/20.60mmThickness: 0.102"/2.59mm Fits: M12 Drain Plug or: Inside Diameter (In): 0.448Outside Diameter (In): 0.811 Fits: Escalade Base Model or Escalade EXTM12 Drain Plug	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	056130	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 Fitment notes — ELRING 056130 Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8Shape: O-Ring	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	71244	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rubber Fitment notes — FEL-PRO 71244 Rubber Dished Washer0.415 (in) Inside Diameter x 0.740 (in) Outside Diameter	View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	097119	🇺🇸 US 🇨🇦 CA	ID: 0.448"RUBBER GASKET	View on Amazon
VAICO Fits: all 2012 Escalade engines	V401110	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	711351300	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	0.4150 IN Inside Diameter	View on Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Insert

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	11503302	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans. Fitment notes — GM GENUINE 11503302 4 speed Automatic trans. Fits: Escalade Base Model6 speed Automatic trans.or Escalade ESV or Escalade EXT	View on Amazon

This table covers the Oil Drain Plug inserts.

Oil Filler Cap

Brand	Part Number	Markets	Notes	Buy
MOTORAD Popular Fits: all 2012 Escalade engines	MO99	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
CALORSTAT Fits: all 2012 Escalade engines	OC2314	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PlasticTwist-On	View on Amazon
DORMAN Fits: all 2012 Escalade engines	80987	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	May help with Oil leaks At The rear main seal or PCV hoses In freezing weather.Vented	View on Amazon
GATES Fits: all 2012 Escalade engines	31103	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
SKP Fits: all 2012 Escalade engines	SKMO99	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with Plastic cap	View on Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: all 2012 Escalade engines	73193	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Services OEM bonded Cap sealAftermarket Design Fitment notes — FEL-PRO 73193 Services OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal Escalade Base Model or Escalade ESVServices OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	24100002	🇺🇸 US 🇨🇦 CA	Size # 32027.94MM Inner Diameter	View on Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Tube

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	918121	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12609624	🇺🇸 US 🇨🇦 CA	Gasket/Seal Not Included	View on Amazon
SKP Fits: all 2012 Escalade engines	SK12609624	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Filler tubes.

Oil Filter

Economy

Brand	Part Number	Markets	Notes	Buy
FRAM Fits: all 2012 Escalade engines	FE10060	🇺🇸 US 🇨🇦 CA	Spin-OnTough Guard or Synthetic Endurance	View on Amazon
FVP Fits: all 2012 Escalade engines	R7060	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
PRO-TEC Fits: all 2012 Escalade engines	PXL57060	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
PUROLATOR Fits: all 2012 Escalade engines	PL12222	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Fitment notes — PUROLATOR PL12222 Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose Synthetic Oil Application. Premium filter recommended	View on Amazon
VAICO Fits: all 2012 Escalade engines	V400978	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	DURAGUARD (without TOP MOUNTED FILTER BYPASS VALVE)	View on Amazon
VARIOUS MFR Fits: all 2012 Escalade engines	PG2222	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

High Performance / Heavy Duty

Brand	Part Number	Markets	Notes	Buy
WIX Popular Fits: all 2012 Escalade engines	57060XP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	XP Extreme DutyBest for Synthetic Motor Oils Fitment notes — WIX 57060XP XP Extreme DutyBest for Synthetic Motor Oils Factory filled synthetic oil	View on Amazon
MOBIL Fits: all 2012 Escalade engines	M1113A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Performance	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ACDELCO Popular Fits: all 2012 Escalade engines	PF48	🇺🇸 US 🇨🇦 CA	GM Original EquipmentFilter Media Material: Enhanced Cellulose Fitment notes — ACDELCO PF48 GM Original EquipmentFilter Media Material: Enhanced Cellulose without Top Mounted Filter Bypass Valve, New E-Core ConstructionExcept Ecuador (CX3)	View on Amazon
BOSCH Popular Fits: all 2012 Escalade engines	3334	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Premium Oil FilterConnection Size: M22X1.5	View on Amazon
WIX Popular Fits: all 2012 Escalade engines	57060	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Spin-On Lube Filter Fitment notes — WIX 57060 Spin-On Lube Filter Factory filled synthetic oil	View on Amazon
ACDELCO Fits: all 2012 Escalade engines	PF48B	🇺🇸 US 🇨🇦 CA	SilverWhite Shell	View on Amazon
DENSO Fits: all 2012 Escalade engines	1502020	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Oil Filter or FTF Engine Oil Filter	View on Amazon
HASTINGS / BALDWIN Fits: all 2012 Escalade engines	LF613	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
HENGST Fits: 6.0L V8 ELECTRIC/GAS	H98W	🇺🇸 US 🇨🇦 CA	Spin-On	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	OC614	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Spin-On Fitment notes — MAHLE / CLEVITE OC614 Spin-On Bypass pressure 14 PSI	View on Amazon
VARIOUS MFR Fits: all 2012 Escalade engines	PG2222EX	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Extended Life	View on Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12600225	🇺🇸 US 🇨🇦 CA	Threaded FittingM20XM22	View on Amazon

This table covers the Oil Filter adapters.

Oil Filter Adapter Gasket / O-Ring

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Fits: all 2012 Escalade engines	73548	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Upper	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	73555	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Lower	View on Amazon

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Filter Bypass Valve

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	926600	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Filter Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Filter Gasket

Brand	Part Number	Markets	Notes	Buy
APEX Fits: all 2012 Escalade engines	AOM6015	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	72462	🇺🇸 US 🇨🇦 CA	Oil Filter Gasket or SealGasket Fitment notes — ULTRA-POWER 72462 Oil Filter Gasket or SealGasketCenter Tubewith Dual Round Port	View on Amazon

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter Remote Mounting Kit

Brand	Part Number	Markets	Notes	Buy
HAYDEN Fits: all 2012 Escalade engines	292	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Filter Relocation Kit. Contains filter mount and engine adapter. Hose Not included.Only For Engines with 22x1.5 mm Filter Thread	View on Amazon

This table covers the Oil Filter Remote Mounting kits.

Oil Galley Plug

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: all 2012 Escalade engines	OGV1	🇺🇸 US	GEN 3	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12573460	🇺🇸 US 🇨🇦 CA	Includes O-Ring Fitment notes — GM GENUINE 12573460 Includes O-Ring Engine BlockSeal15.68mm Diameter	View on Amazon
MELLING Fits: all 2012 Escalade engines	MOGP100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MELLING Fits: all 2012 Escalade engines	MOGP100HP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceDouble O-Ring Design Fitment notes — MELLING MOGP100HP High PerformanceDouble O-Ring DesignBlack anodized billet 6061-T6 aluminum 2.54 inches Long	View on Amazon

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Level Sensor

Brand	Part Number	Markets	Notes	Buy
HOLSTEIN Fits: 6.2L V8	2OLS0002	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Escalade EXT	View on Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8	FLS14	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Pin TerminalTerminal Gender: Male Fitment notes — STANDARD MOTOR PRODUCTS FLS14 Pin TerminalTerminal Gender: MaleSteelSwitch Mounting Type: Screw-inDirect OE ReplacementNo. of Volts: 12No. of Terminals: 2No. of Hose Connec.: 2No. of Connector Cavities: 3Functions: Oil Level SensorConnector: Female Escalade EXT	View on Amazon

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Oil Pan

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8	12640746	🇺🇸 US 🇨🇦 CA	Includes Baffle, Bolts, Plug, Deadener, Gasket, Valve, Fitting, Seal Fitment notes — GM GENUINE 12640746 Includes Baffle, Bolts, Plug, Deadener, Gasket, Valve, Fitting, Seal Fits: Escalade ESV or Escalade EXTExc. Switchor Escalade Base Model6 speed Automatic trans.Exc. Switch	View on Amazon
SKP Popular Fits: 6.2L V8	SK264375	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	without Oil Level Switch	View on Amazon
DORMAN Fits: 6.2L V8	264375	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	without Oil Level Sensor	View on Amazon
SPECTRA PREMIUM Fits: 6.2L V8	GMP53C	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	GASKET AND/OR SEALANT NOT INCLUDED	View on Amazon
ULTRA-POWER Fits: 6.2L V8	264375	🇺🇸 US 🇨🇦 CA	without Oil Level Sensor	View on Amazon
VAICO Fits: 6.2L V8	V570124	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Base Model or Luxury or Platinum or Premium	View on Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: all 2012 Escalade engines	795390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12554990	🇺🇸 US 🇨🇦 CA	M6X1.0X136	View on Amazon

This table covers the Oil Pan bolts.

Oil Pan Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12577903	🇺🇸 US 🇨🇦 CA	without KC4For Models with KC4 See Group 1.540 Engine Oil Cooler Lines	View on Amazon

This table covers the Oil Pan covers.

Oil Pan Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	OS30693R	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Permadry Molded Rubber	View on Amazon
ULTRA-POWER Popular Fits: all 2012 Escalade engines	OS30693R	🇺🇸 US 🇨🇦 CA	Molded Rubber Gasket(s) IncludedMolded Rubber	View on Amazon
APEX Fits: all 2012 Escalade engines	AOP371	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	947800	🇺🇸 US 🇨🇦 CA	Material: Ethylene Acrylic Elastomer (AEM)Number of Bolt Holes: 15	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	OC293A	🇺🇸 US		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12612350	🇺🇸 US 🇨🇦 CA	Bolt Hole Quantity: 17	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	OS32241	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Molded Rubber	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	101022301	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pan Gasket Rivet

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12558759	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the Oil Pan Gasket rivets.

Oil Pressure Filter

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12585328	🇺🇸 US 🇨🇦 CA	Includes O-Ring Fitment notes — GM GENUINE 12585328 Includes O-Ring Seal	View on Amazon
SKP Popular Fits: all 2012 Escalade engines	SK917143	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	For Oil Pressure Sensor	View on Amazon
DORMAN Fits: all 2012 Escalade engines	917143	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	For Oil Pressure Sensor	View on Amazon
MELLING Fits: all 2012 Escalade engines	MOF100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
STANDARD MOTOR PRODUCTS Fits: all 2012 Escalade engines	EOF100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
WELLS Fits: all 2012 Escalade engines	7F1046	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Pressure filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.

Oil Pressure Relief Valve

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12608835	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8	MOPR100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Pressure Relief valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Oil Pressure Relief Valve Deflector

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12639759	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8	MOD100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Pressure Relief Valve deflectors.

Oil Pressure Relief Valve Plug

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: all 2012 Escalade engines	M29537	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Contains 5 Pieces Fitment notes — MELLING M29537 Contains 5 Pieces Fits: All GM LS Engine Oil Pumps	View on Amazon

This table covers the Oil Pressure Relief Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Pump

Economy

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	EPK152	🇺🇸 US	'Pressure King' Value Line Pump Fitment notes — ENGINETECH EPK152 'Pressure King' Value Line Pump Engine VIN code B,G,K,N,UIron Engine Block	View on Amazon
ENGINETECH Fits: 6.2L V8	EPK137	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	'Pressure King' Value Line Pump Fitment notes — ENGINETECH EPK137 'Pressure King' Value Line Pump Fits: Escalade Base Model or Escalade ESVEngine VIN Code 2,8,For Escalade EXTEngine VIN Code 2,8,F	View on Amazon
SKP Fits: 6.2L V8	SKPM365	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ULTRA-POWER Fits: 6.2L V8	M365	🇺🇸 US 🇨🇦 CA	Does Not Include Oil Pickup Tube Assy	View on Amazon

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8	10355HV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceHigh Volume and High Pressure +10 PSI Higher Pressure High Performance Oil Pump Fitment notes — MELLING 10355HV High PerformanceHigh Volume and High Pressure +10 PSI Higher Pressure High Performance Oil PumpNo Warranty	View on Amazon
MELLING Fits: 6.2L V8	10355	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 10355 High PerformanceNo Warranty Stock Volume +10 PSI Higher Pressure Over Stock Pressure, High Performance Oil Pump	View on Amazon

High Volume / Pressure

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8	M365HV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	20% Additional Volume Over Stock Oil PumpDoes Not Include Oil Pickup Tube Assembly	View on Amazon
MELLING Popular Fits: 6.2L V8	M365HV395S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	20% Additional Volume Over Stock Oil PumpIncludes Oil Pickup Tube Assembly	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	EP295HV	🇺🇸 US	High Volume Fitment notes — ENGINETECH EP295HV High Volume Engine VIN code B,G,K,N,UIron Engine Block	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.2L V8	M365	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Oil Pickup Tube Assembly	View on Amazon
ENGINETECH Fits: 6.2L V8	EP365	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Housing Material: Aluminum Fitment notes — ENGINETECH EP365 Housing Material: Aluminum Fits: Escalade Base Model or Escalade ESVEngine VIN Code 2,8,For Escalade EXTEngine VIN Code 2,8,F	View on Amazon
GM GENUINE Fits: 6.2L V8	12710304	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: 6.2L V8	M365395S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Oil Pickup Tube AssemblyGears Included: Not Applicable	View on Amazon
SEALED POWER Fits: 6.2L V8	22443669	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Oil Pickup Tube Assembly	View on Amazon
VAICO Fits: 6.2L V8	V510666	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Base Model or Luxury or Platinum or Premium	View on Amazon

Brand	Part Number	Markets	Notes	Buy
SEALED POWER Fits: 6.2L V8	22443711HV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Volume	View on Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Cover Bolt

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: all 2012 Escalade engines	795390	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the Oil Pump Cover bolts.

Oil Pump Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.0L V8 ELECTRIC/GAS	875400	🇺🇸 US 🇨🇦 CA	Material: FVMQ fluorosilicone rubber Fitment notes — ELRING 875400 Material: FVMQ fluorosilicone rubber Suction Pipe	View on Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump Pickup Tube / Screen

Brand	Part Number	Markets	Buy
GM GENUINE Fits: all 2012 Escalade engines	12608579	🇺🇸 US 🇨🇦 CA	View on Amazon
MELLING Fits: all 2012 Escalade engines	395S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	22415095	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon

This table covers the pickup tubes and screens that feed the oil pump.

Oil Pump Pickup Tube Bracket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: 6.2L V8	M29500	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING M29500 High PerformanceNo Warranty Uses The Unused Bolt Hole In The Oil PumpDoes Not Fit Pickup Tube with Welded Flange GM Part Number 12608593Does Not Fit Pickup Tubes with Two Bolt Hole Flanges	View on Amazon

This table covers the brackets that mount the Oil Pump Pickup Tube. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.

Oil Pump Pickup Tube O-Ring

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	72401	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
APEX Fits: all 2012 Escalade engines	AOM6014	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inlet Tube	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12584922	🇺🇸 US 🇨🇦 CA	TEFLON COATEDORANGE Fitment notes — GM GENUINE 12584922 TEFLON COATEDORANGEID=19.63 T=4.32	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	B32790	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Pump Pick-up Tube GasketMolded Rubber Fitment notes — MAHLE / CLEVITE B32790 Oil Pump Pick-up Tube GasketMolded Rubber O-Ring Type	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	411041600	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inlet Tube	View on Amazon

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Strainer Gasket

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: all 2012 Escalade engines	M29517	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the gaskets that seal the Oil Strainer. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Sump Plate

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: all 2012 Escalade engines	99971	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Level Sensor Cover	View on Amazon

This table covers the Oil Sump plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Oil Sump Windage Tray

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12611129	🇺🇸 US 🇨🇦 CA	Mount Hole Diameter (In): 0.452 IN	View on Amazon

This table covers the windage trays that keep crank windage out of the oil sump.

Piston

Premium

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.0L V8 ELECTRIC/GAS	P5073	🇺🇸 US 🇨🇦 CA	HypereutecticFloating Pin Fitment notes — ENGINETECH P5073 HypereutecticFloating PinHypereutectic Coated skirtRecessed Head 0.053" deep2 valve reliefsRecessed HeadCoated Skirt Engine VIN code B,G,K,U,Y	View on Amazon
SILV-O-LITE Popular Fits: 6.0L V8 ELECTRIC/GAS	3527HCA	🇺🇸 US 🇨🇦 CA	Floating Pin TypeOffset Pin Configuration Fitment notes — SILV-O-LITE 3527HCA Floating Pin TypeOffset Pin ConfigurationFlat Top	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	P5070	🇺🇸 US 🇨🇦 CA	HypereutecticFloating Pin Fitment notes — ENGINETECH P5070 HypereutecticFloating PinRecessed Head 0.047" deep2 valve reliefsCoated Skirt Engine VIN code B,G,K,U,Y	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	2244035	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Skirt Coated	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	2244035WR	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with RingsSkirt Coated	View on Amazon
SEALED POWER Fits: 6.0L V8 ELECTRIC/GAS	H1506CPA	🇺🇸 US 🇨🇦 CA	Flat Head with Two Valve Reliefs Duroshield Skirt Coated PistonRing Groove Widths: 1.2mm, 1.5mm, 2.5mm	View on Amazon
SILV-O-LITE Fits: 6.0L V8 ELECTRIC/GAS	3518HC	🇺🇸 US 🇨🇦 CA	Hyper-CoatedFloating Pin Type Fitment notes — SILV-O-LITE 3518HC Hyper-CoatedFloating Pin TypeOffset Pin ConfigurationDish Top Shallow Oil Groove	View on Amazon
SILV-O-LITE Fits: 6.0L V8 ELECTRIC/GAS	3518HCK1	🇺🇸 US 🇨🇦 CA	SilvoliteFloating Pin Type Fitment notes — SILV-O-LITE 3518HCK1 SilvoliteFloating Pin TypeOffset Pin ConfigurationDish TopIncludes Rings Shallow Oil Groove	View on Amazon
SILV-O-LITE Fits: 6.0L V8 ELECTRIC/GAS	3527HCAK1	🇺🇸 US 🇨🇦 CA	Floating Pin TypeOffset Pin Configuration Fitment notes — SILV-O-LITE 3527HCAK1 Floating Pin TypeOffset Pin ConfigurationFlat TopIncludes Rings	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	19178737	🇺🇸 US 🇨🇦 CA	0.5MM OVERSIZED	View on Amazon
GM GENUINE Fits: 6.2L V8	19208472	🇺🇸 US 🇨🇦 CA	0.5MM O.S.	View on Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Pin Bushing

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	EB0238	🇺🇸 US 🇨🇦 CA	Semi-finished ID	View on Amazon

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Piston Pin Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12569638	🇺🇸 US 🇨🇦 CA	Used with Federal Mogul PistonsSingle Use Fitment notes — GM GENUINE 12569638 Used with Federal Mogul PistonsSingle UseGAS Engine Only	View on Amazon

This table covers the Piston Pin retainers.

Piston Ring

Premium

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.0L V8 ELECTRIC/GAS	S10248	🇺🇸 US 🇨🇦 CA	Steel Top PremiumSet Fitment notes — ENGINETECH S10248 Steel Top PremiumSetMoly Coated 1.2mm / 1.5mm / 2.5mm	View on Amazon
HASTINGS MANUFACTURING Popular Fits: 6.0L V8 ELECTRIC/GAS	2M5170	🇺🇸 US 🇨🇦 CA	Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly Fitment notes — HASTINGS MANUFACTURING 2M5170 Plasma Moly Top RingTop Ring Surface Treatment: Plasma MolyFull Setfor 2 Ring Piston	View on Amazon
HASTINGS MANUFACTURING Popular Fits: 6.2L V8	2M5292	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Plasma Moly Top RingFull Set Fitment notes — HASTINGS MANUFACTURING 2M5292 Plasma Moly Top RingFull SetTop Ring Surface Treatment: Plasma Molyfor 2 Ring Piston Fits: Escalade ESV or: Escalade Base Model or Escalade EXT	View on Amazon
SEALED POWER Popular Fits: 6.2L V8	E997K	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PremiumRing Groove Widths: 1.5mm, 1.5mm, 2.5mm Fitment notes — SEALED POWER E997K PremiumRing Groove Widths: 1.5mm, 1.5mm, 2.5mmSetMoly Steel Top RingDuctile Second Ring	View on Amazon
ENGINETECH Fits: 6.2L V8	M40718	🇺🇸 US	PremiumSet Fitment notes — ENGINETECH M40718 PremiumSetMoly Coated Fits: Escalade Base ModelEngine VIN Code 2,8,F1.5 / 1.5 / 2.5mmor Escalade ESV or Escalade EXTEngine VIN Code 2,8,F1.5 / 1.5 / 2.5mm	View on Amazon
HASTINGS MANUFACTURING Fits: 6.0L V8 ELECTRIC/GAS	2M5170S	🇺🇸 US 🇨🇦 CA	Plasma Moly Top Ring1 Cylinder Set Fitment notes — HASTINGS MANUFACTURING 2M5170S Plasma Moly Top Ring1 Cylinder SetFor 2 Ring Piston	View on Amazon
HASTINGS MANUFACTURING Fits: 6.2L V8	2M5292S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Plasma Moly Top Ring1 Cylinder Set Fitment notes — HASTINGS MANUFACTURING 2M5292S Plasma Moly Top Ring1 Cylinder SetFor 2 Ring Piston Fits: Escalade Base Modelor Escalade ESV or: Escalade EXT	View on Amazon
MAHLE / CLEVITE Fits: 6.0L V8 ELECTRIC/GAS	42157CP	🇺🇸 US 🇨🇦 CA	PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel Fitment notes — MAHLE / CLEVITE 42157CP PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSetAxial Height: 1.2mm / 1.5mm / 2.5mmFacing: Plasma-Moly / Chrome Shallow Groove	View on Amazon
MAHLE / CLEVITE Fits: 6.2L V8	42154CP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	PremiumMaterial Carbon Steel / Carbon Steel / Stainless Steel Fitment notes — MAHLE / CLEVITE 42154CP PremiumMaterial Carbon Steel / Carbon Steel / Stainless SteelSetAxial Height: 1.5mm / 1.5mm / 2.5mmFacing: Plasma-Moly / Chrome Shallow Groove	View on Amazon
SEALED POWER Fits: 6.0L V8 ELECTRIC/GAS	E979K	🇺🇸 US 🇨🇦 CA	PremiumRing Groove Widths: 1.2mm, 1.5mm, 2.5mm Fitment notes — SEALED POWER E979K PremiumRing Groove Widths: 1.2mm, 1.5mm, 2.5mmSetMoly Steel Top RingDuctile Second Ring	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	89017485	🇺🇸 US 🇨🇦 CA	0.5 MM O/SUpper Compression Ring is 1.2 mm Thick	View on Amazon
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	19178307	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.Standard	View on Amazon
GM GENUINE Fits: 6.2L V8	19168090	🇺🇸 US 🇨🇦 CA	Standard	View on Amazon
GM GENUINE Fits: 6.2L V8	19178596	🇺🇸 US 🇨🇦 CA	0.5MM O.S.	View on Amazon
ITM ENGINE COMPONENTS Fits: 6.2L V8	0216972	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set1.5 X 1.5 X 2.5mm	View on Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: all 2012 Escalade engines	500704	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceChrome Moly Steel Fitment notes — MELLING 500704 High PerformanceChrome Moly SteelNo Warranty	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	EPR614	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	7.397" Overall Length Fitment notes — ENGINETECH EPR614 7.397" Overall Length Fits: Escalade Base Model or Escalade ESVEngine VIN Code 2,8,FIntake or Exhaustor Escalade EXTEngine VIN Code 2,8,FIntake or Exhaust	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	10238852	🇺🇸 US 🇨🇦 CA	Material: 1010 Steel	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	746614	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	7.397 Length	View on Amazon
SBI Fits: all 2012 Escalade engines	1901537	🇺🇸 US 🇨🇦 CA	Intake and Exhaust7.397 Length Fitment notes — SBI 1901537 Intake and Exhaust7.397 Length312X075 Diameter/Wall	View on Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Push Rod Guide Plate

Brand	Part Number	Markets	Notes	Buy
MELLING Fits: all 2012 Escalade engines	MGP114HP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance Fitment notes — MELLING MGP114HP High Performance 5/16" ThickSold as Set of 8	View on Amazon

This table covers the Push Rod Guide plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Rocker Arm

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	ER359	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine VIN Code 8,B,K,YExhaust Fitment notes — ENGINETECH ER359 Engine VIN Code 8,B,K,YExhaustInline Typewith hardened pivot and heavy duty lock rings Fits: Escalade EXTEngine VIN Code 2,8,FExhaustInline Typewith hardened pivot and heavy duty lock ringsor ExhaustEscalade Base ModelEngine VIN Code 8,B,G,K,YInline Typewith hardened pivot and heavy duty lock ringsor ExhaustEscalade ESVEngine VIN Code 2,8,FInline Typewith hardened pivot and heavy duty lock rings	View on Amazon
GM GENUINE Popular Fits: 6.2L V8	12696105	🇺🇸 US 🇨🇦 CA	IntakeOFFSET INLET ROCKER ARM	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	MR1341	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Exhaust	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	ER360	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine VIN Code 8,B,K,YIntake Fitment notes — ENGINETECH ER360 Engine VIN Code 8,B,K,YIntakeOffset Typewith hardened pivot and heavy duty lock rings Fits: Escalade EXTEngine VIN Code 2,8,FIntakeOffset Typewith hardened pivot and heavy duty lock ringsor IntakeEscalade Base Model or Escalade ESVEngine VIN Code 2,8,FOffset Typewith hardened pivot and heavy duty lock rings	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12681275	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans. Fitment notes — GM GENUINE 12681275 4 speed Automatic trans. ARM, VLV RKR EXH, QTY 8	View on Amazon
MELLING Fits: all 2012 Escalade engines	MRK100HP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	KitHigh Performance Fitment notes — MELLING MRK100HP KitHigh Performance Use with trunion install Kit Mtik-100	View on Amazon
MELLING Fits: 6.2L V8	MR1342	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Intake	View on Amazon
SBI Fits: all 2012 Escalade engines	1801337	🇺🇸 US 🇨🇦 CA	Intake and ExhaustRoller Pivot Assy. Fitment notes — SBI 1801337 Intake and ExhaustRoller Pivot Assy.Note: Captive Bearing Design with High Grade Steel Trunion ExhaustRoller Pivot Assy.Note: Captive Bearing Design with High Grade Steel Trunion	View on Amazon
SBI Fits: 6.2L V8	1801336	🇺🇸 US 🇨🇦 CA	IntakeRoller Pivot Assy. Fitment notes — SBI 1801336 IntakeRoller Pivot Assy.Note: OffsetUse with Large Rectangular Intake PortsSolid Shaft Pivot Design	View on Amazon
SKP Fits: all 2012 Escalade engines	SKMR1341	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	ExhaustCaptive Bearing Design Fitment notes — SKP SKMR1341 ExhaustCaptive Bearing DesignCentered	View on Amazon
SKP Fits: 6.2L V8	SKMR1342	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	IntakeCaptive Bearing Design Fitment notes — SKP SKMR1342 IntakeCaptive Bearing DesignOFFSET	View on Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Bolt

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12560961	🇺🇸 US 🇨🇦 CA	M8X1.25X52.5	View on Amazon

This table covers the Rocker Arm bolts.

Rocker Arm Shaft Support

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	12742404	🇺🇸 US 🇨🇦 CA		View on Amazon
GM GENUINE Fits: 6.2L V8	12600936	🇺🇸 US 🇨🇦 CA	Shaft Diameter (In): 0.7358267717 In	View on Amazon

This table covers the Rocker Arm Shaft supports.

Rocker Arm Stud

Brand	Part Number	Markets	Notes	Buy
ARP Fits: 6.0L V8 ELECTRIC/GAS	2347207	🇺🇸 US 🇨🇦 CA		View on Amazon
MELLING Fits: all 2012 Escalade engines	MRDS100HP	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING MRDS100HP High PerformanceNo Warranty 3/8-24 Rocker Nut Thread8mm-1.25X2.300 Base Thread	View on Amazon

This table covers the Rocker Arm studs.

Timing Chain

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: all 2012 Escalade engines	94205	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	3SRH60	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12646387	🇺🇸 US 🇨🇦 CA		View on Amazon
INA Fits: all 2012 Escalade engines	ZC94205	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Timing Chain Type: Simplex	View on Amazon
PREFERRED COMPONENTS INC Fits: all 2012 Escalade engines	C1360	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
S.A. GEAR Fits: all 2012 Escalade engines	3SRH60	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Chain	View on Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand	Part Number	Markets	Notes	Buy
GATES Fits: all 2012 Escalade engines	CHK138	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Timing Chain, Tensioner, Sprocket	View on Amazon
MELLING Fits: 6.2L V8	33SRH60SDHVVT	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Service GradeIncludes Variable Valve Timing (VVT) Sprocket	View on Amazon
MELLING Fits: 6.2L V8	33SRH60HVVT1	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Service GradeIncludes Variable Valve Timing (VVT) Oil Control Valve, Variable Valve Timing (VVT) Sprocket	View on Amazon
PREFERRED COMPONENTS INC Fits: all 2012 Escalade engines	TS11361	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Variable Valve Timing (VVT) Sprocket	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8	TS11360	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Variable Valve Timing (VVT) Sprocket Included Fitment notes — PREFERRED COMPONENTS INC TS11360 Variable Valve Timing (VVT) Sprocket Included Do Not Re-Use VVT Oil Control ValveMust Be Replaced Upon Re-Assembly	View on Amazon
S.A. GEAR Fits: all 2012 Escalade engines	76230T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Fitment notes — S.A. GEAR 76230T Does Not Include Camshaft SprocketIncludes Chain, Crank Sprocket, Tensioner Does Not Include Cam Sprocket	View on Amazon
S.A. GEAR Fits: all 2012 Escalade engines	78535T9R	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Billet Steel Roller .250Includes Chain Fitment notes — S.A. GEAR 78535T9R Billet Steel Roller .250Includes Chain Single Roller 250	View on Amazon
S.A. GEAR Fits: 6.2L V8	78935T9	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Chain Fitment notes — S.A. GEAR 78935T9 Includes Chain Single Roller 250	View on Amazon
S.A. GEAR Fits: 6.2L V8	76230TV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Chain, Crank Sprocket, Tensioner, VVT Cam	View on Amazon
S.A. GEAR Fits: 6.2L V8	76230TVV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Chain, Crank Sprocket, Tensioner, VVT Cam, VVT Oil Control Valve	View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	33SRH60SD	🇺🇸 US 🇨🇦 CA	Variable Valve Timing (VVT) Sprocket Not Included	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
CLOYES Popular Fits: all 2012 Escalade engines	94205SB	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket Fitment notes — CLOYES 94205SB Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket without Camshaft Gear	View on Amazon
ENGINETECH Popular Fits: all 2012 Escalade engines	TS1360	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Crank SprocketIncludes crank sprocket, chain & tensioner/guide assembly Fitment notes — ENGINETECH TS1360 Includes Crank SprocketIncludes crank sprocket, chain & tensioner/guide assemblyVVT cam sprocket Not included Engine VIN Code 5,8,B,G,J,K,Y chain and tensioner/guide assembly, without cam sprocket	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	33SRH60SD	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MELLING Popular Fits: 6.2L V8	TOPK1001HV	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	20% Additional Volume Over Stock Oil PumpIncludes M365HV High Volume Oil Pump, Variable Valve Timing (VVT) Sprocket and VVT Oil Control Valve	View on Amazon
CLOYES Fits: all 2012 Escalade engines	93673TE	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Variable Valve Timing Components Not Included Fitment notes — CLOYES 93673TE Variable Valve Timing Components Not Included without Camshaft GearTensioner Elimination Kit	View on Amazon
INA Fits: all 2012 Escalade engines	ZC94205SB	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Fitment notes — INA ZC94205SB Kit Contains 1 Chain, 1 Crankshaft Sprocket, 1 TensionerDoes Not Include Cam Sprocket Does not include Camshaft Sprocket Option	View on Amazon
INA Fits: all 2012 Escalade engines	ZC93673TX9	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes 1 Chain, 1 Crank Sprocket, 1 Cam Sprocket, 1 Single Roller 250	View on Amazon
INA Fits: all 2012 Escalade engines	ZC78535T9R	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Kit Contains 1 Chain, 2 Gaskets, 1 Crank Sprocket, 1 Cam Sprocket, 1 Oil Pump Sprocket Fitment notes — INA ZC78535T9R Kit Contains 1 Chain, 2 Gaskets, 1 Crank Sprocket, 1 Cam Sprocket, 1 Oil Pump Sprocket Double Roller .250with 9 Keys	View on Amazon
MELLING Fits: 6.2L V8	TOPK1001	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Oil Pump, Variable Valve Timing (VVT) Sprocket and VVT Oil Control Valve	View on Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Cover Gasket

Brand	Part Number	Markets	Notes	Buy
ELRING Fits: 6.0L V8 ELECTRIC/GAS	B81070	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Chain Tensioner

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12626407	🇺🇸 US 🇨🇦 CA	Includes Bolt, RetainerKit	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	BT5490	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
CLOYES Fits: all 2012 Escalade engines	95490	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Inner	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	TT5490	🇺🇸 US 🇨🇦 CA	Tensioner/guide assembly	View on Amazon
INA Fits: all 2012 Escalade engines	ZT95490	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
PREFERRED COMPONENTS INC Fits: all 2012 Escalade engines	T66092	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
S.A. GEAR Fits: all 2012 Escalade engines	91049	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Tensioner	View on Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 6.2L V8	635517	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
GM GENUINE Fits: 6.0L V8 ELECTRIC/GAS	12636045	🇺🇸 US 🇨🇦 CA	Front4 speed Automatic trans. Fitment notes — GM GENUINE 12636045 Front4 speed Automatic trans.without Bolt, Seal, Wire, Gasket, Sensor, Magnet	View on Amazon
GM GENUINE Fits: 6.2L V8	12594939	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
PIONEER Fits: all 2012 Escalade engines	500323RSH	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear Seal Housing Fitment notes — PIONEER 500323RSH Rear Seal Housing Escalade Base ModelRear Seal Housing	View on Amazon
SKP Fits: 6.2L V8	SK81068	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	with 10AN Turbo Oil Drain Fitting	View on Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	TCS45993	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Must Use with Part Number(s) OS 30693 R	View on Amazon
MAHLE / CLEVITE Popular Fits: 6.2L V8	JV5158	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetMolded Rubber Fitment notes — MAHLE / CLEVITE JV5158 SetMolded RubberIncludes Water Pump Gaskets, and Seal Requires Oil Pan Set	View on Amazon
SKP Popular Fits: all 2012 Escalade engines	SKTCS45993	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Gasket Kit Fitment notes — SKP SKTCS45993 Gasket Kit Timing Cover Gasket, Water Pump Gaskets, and Seal	View on Amazon
ULTRA-POWER Popular Fits: all 2012 Escalade engines	TCS45993	🇺🇸 US 🇨🇦 CA	Set Fitment notes — ULTRA-POWER TCS45993 Set Must Use with #(S) OS 30693 R	View on Amazon
APEX Fits: all 2012 Escalade engines	ATC3710	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	948280	🇺🇸 US 🇨🇦 CA		View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	231390	🇺🇸 US 🇨🇦 CA	with Crankshaft Seal, Bolts/Screws	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	TCG293A	🇺🇸 US	Metal / Rubber Fitment notes — ENGINETECH TCG293A Metal / Rubber Engine VIN code J,W	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	TCC293A	🇺🇸 US		View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	TCS459931	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Must Use with Part Number(s) OS 30693 RCamshaft sensor, Flow valve connector, Vacuum pump gaskets included	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12735382	🇺🇸 US 🇨🇦 CA	Crankshaft Seal Included: No	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	JV5022	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — MAHLE / CLEVITE JV5022 Set Requires Oil Pan Set	View on Amazon
SKP Fits: all 2012 Escalade engines	SK12633904	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Gasket Only Fitment notes — SKP SK12633904 Gasket Only Timing Cover Gasket Only	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	151019801	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Repair Sleeve

Brand	Part Number	Markets	Notes	Buy
SCHAEFFLER Fits: all 2012 Escalade engines	SR3913	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	22.99 mm Width62 mm Outside Diameter Fitment notes — SCHAEFFLER SR3913 22.99 mm Width62 mm Outside Diameter54.99 mm Inside Diameterwith Hybrid Fits: Escalade Base Model22.99 mm Width62 mm Outside Diameter54.99 mm Inside Diameteror Escalade ESV or Escalade EXT22.99 mm Width62 mm Outside Diameter54.99 mm Inside Diameter	View on Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: all 2012 Escalade engines	S5673	🇺🇸 US	Fits Escalade EXT Fitment notes — ENGINETECH S5673 Fits: Escalade EXT or: FrontEscalade Base Model or Escalade ESV	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	29602	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
SKF Fits: all 2012 Escalade engines	21605	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand	Part Number	Markets	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12556582	🇺🇸 US 🇨🇦 CA	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	S827	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon
CLOYES Fits: all 2012 Escalade engines	S827	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon
INA Fits: all 2012 Escalade engines	ZSS827	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon
PREFERRED COMPONENTS INC Fits: all 2012 Escalade engines	G55827	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon
S.A. GEAR Fits: all 2012 Escalade engines	S827	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	View on Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Valve Cover

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12642655	🇺🇸 US 🇨🇦 CA	LeftINCLUDES COVER,GASKET,BOLT,DEFLECTOR,FITTING	View on Amazon
DORMAN Fits: all 2012 Escalade engines	264994	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Right	View on Amazon
DORMAN Fits: all 2012 Escalade engines	264969	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Left	View on Amazon
SKP Fits: all 2012 Escalade engines	SK264994	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Gasket Fitment notes — SKP SK264994 Includes Gasket Right RightBase Model or Luxury or Platinum or Premium	View on Amazon
SKP Fits: all 2012 Escalade engines	SK264969	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Left	View on Amazon

This table covers the Valve covers.

Valve Cover Bolt / Screw

Brand	Part Number	Markets	Notes	Buy
ARP Fits: 6.0L V8 ELECTRIC/GAS	4347505	🇺🇸 US 🇨🇦 CA	Stainless Steel Hex Bolt Head Fitment notes — ARP 4347505 Stainless Steel Hex Bolt Head Engine Designation: GENIII IV/LSBlock with 0.750" Spacer	View on Amazon
ARP Fits: 6.0L V8 ELECTRIC/GAS	4347504	🇺🇸 US 🇨🇦 CA	Block with 0.375" spacer12 Point Bolt Head Fitment notes — ARP 4347504 Block with 0.375" spacer12 Point Bolt Head Engine Designation: GENIII IV/LS	View on Amazon
ARP Fits: 6.0L V8 ELECTRIC/GAS	4347506	🇺🇸 US 🇨🇦 CA	Block with 0.750" spacer12 Point Bolt Head Fitment notes — ARP 4347506 Block with 0.750" spacer12 Point Bolt Head Engine Designation: GENIII IV/LS	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12577215	🇺🇸 US 🇨🇦 CA	with Grommet,SleeveM6.0X1.0	View on Amazon

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.

Valve Cover Gasket

Brand	Part Number	Markets	Notes	Buy
FEL-PRO Popular Fits: all 2012 Escalade engines	VS50504R	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Permadry RubberValve Cover Grommets Not Included	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	VS50504R1	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Permadry Molded RubberIncludes Valve Cover Grommets	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	VS50250A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetMolded Rubber Fitment notes — MAHLE / CLEVITE VS50250A SetMolded RubberIncludes Valve Cover Grommets	View on Amazon
APEX Fits: all 2012 Escalade engines	AVC371	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Does Not Include Grommets	View on Amazon
APEX Fits: all 2012 Escalade engines	AVC371S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Includes Grommets	View on Amazon
BECK/ARNLEY Fits: 6.0L V8 ELECTRIC/GAS	0362045	🇺🇸 US 🇨🇦 CA	Includes Grommets	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	876270	🇺🇸 US 🇨🇦 CA	Material: Polyacrylate Rubber (ACM)	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	838210	🇺🇸 US 🇨🇦 CA	Material: Multiple	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	VCC293A	🇺🇸 US	SetIncludes Grommets	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12637683	🇺🇸 US 🇨🇦 CA	Sold Individually	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	89017690	🇺🇸 US 🇨🇦 CA	Upperwithout The Center Portion	View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	VS50250	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetMolded Rubber	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	151066301	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetValve Cover Grommets Not Included	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	151041601	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetIncludes Grommets Fitment notes — VICTOR REINZ 151041601 SetIncludes Grommets Grommets Included	View on Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Grommet

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	GS33466	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	KitSet Fitment notes — MAHLE / CLEVITE GS33466 KitSetMolded Rubber	View on Amazon
APEX Fits: all 2012 Escalade engines	AES308	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	875380	🇺🇸 US 🇨🇦 CA	Material: MVQ (silicone rubber)	View on Amazon
FEL-PRO Fits: all 2012 Escalade engines	ES72233	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	151014201	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set	View on Amazon

This table covers the Valve Cover grommets.

Valve Guide

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Fits: all 2012 Escalade engines	GD3053	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Iron Fitment notes — ENGINETECH GD3053 Iron Intake and Exhaust .3154 X .5000 X 2.115Spiral ID Fits: Escalade EXTEngine VIN Code 2,8,FINT& EXH.3154 X .5000 X 2.115"Spiral ID or: ExhaustEscalade Base Model or Escalade ESVEngine VIN Code 2,8,F.3154 X .5000 X 2.115"Spiral ID or: IntakeEscalade Base Model or Escalade ESVEngine VIN Code 2,8,F.3154 X .5000 X 2.115"Spiral ID	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	303053	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	2.115 OAL. 0.3154 I.D. 0.500 O.D.	View on Amazon
SBI Fits: all 2012 Escalade engines	1403053	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.3154 I.D. Fitment notes — SBI 1403053 Intake and Exhaust0.3154 I.D.0.5000 O.D.2.115 Length1-SR Type+2 O/S Available (140-3053+2)	View on Amazon

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.

Valve Lifter

Economy

Brand	Part Number	Markets	Notes	Buy
MAHLE / CLEVITE Fits: all 2012 Escalade engines	2131738	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Fitment notes — MAHLE / CLEVITE 2131738 Hydraulic Fits: Lifter Type: Hydraulic RollerCylinder 2,3,5,8 with Cylinder Deactivationor with RollerCylinder 2, 3, 5, 8 with Cylinder Deactivation Fits: with RollerCylinder 2, 3, 5, 8 with Cylinder Deactivationor Escalade Base ModelLifter Type: Hydraulic RollerCylinder 2,3,5,8 with Cylinder Deactivationor Escalade ESV or Escalade EXTLifter Type: Hydraulic Roller	View on Amazon
SKP Fits: all 2012 Escalade engines	SK12740071	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	For Intake And Exhaust Valves, Cylinders 1, 4, 6, 7Active Fuel Management Engine	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	L2281	🇺🇸 US	HydraulicRoller Follower Fitment notes — ENGINETECH L2281 HydraulicRoller Follower Non-deactivating type Fits: Escalade Base ModelNon-deactivating typ or: Escalade ESV or Escalade EXTNon-deactivating type	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	12698945	🇺🇸 US 🇨🇦 CA	LIFTERS ONLYNON-ACTIVE FUEL MANAGEMENT LIFTER	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	JB2079	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Fitment notes — MELLING JB2079 Hydraulic For Intake And Exhaust Valves, Cylinders 2, 3, 5, 8Active Fuel Management Engine	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	JB8011	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Fitment notes — MELLING JB8011 Hydraulic For Intake And Exhaust Valves, Cylinders 1, 4, 6, 7Active Fuel Management Engine	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	LG2303K	🇺🇸 US	KitContains L2303K-16, EG596(2) and EG608(2) Fitment notes — ENGINETECH LG2303K KitContains L2303K-16, EG596(2) and EG608(2)HydraulicRoller FollowerContains L2303K-16,EG596(2) and EG608(2) VIN Code 5,J,YAluminumblock with AFM (cylinder deactivation)Deactivating type Contains L2303K-16,EG596(2) and EG608(2) VIN Code 8,F,Jwith AFM (cylinder deactivation)Deactivating type Contains L2303K-16,EG596(2) and EG608(2)	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	L2303K	🇺🇸 US	HydraulicRoller Follower Fitment notes — ENGINETECH L2303K HydraulicRoller Follower Engine VIN Code 5,J,Yaluminumblock with AFM (cylinder deactivation) Fits: Escalade Base Model or Escalade EXTEngine VIN Code 8,F,Jwith AFM (cylinder deactivation)Deactivating typ or: Escalade ESVEngine VIN Code 8,F,Jwith AFM (cylinder deactivation)Deactivating type	View on Amazon
ENGINETECH Fits: 6.2L V8	LG2281K	🇺🇸 US	KitContains L2281-16, EG365-4 Fitment notes — ENGINETECH LG2281K KitContains L2281-16, EG365-4Roller FollowerHydraulic Non-deactivating type Contains L2281-16, EG365-4	View on Amazon
MELLING Fits: all 2012 Escalade engines	JBK8000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Kit Fitment notes — MELLING JBK8000 Kit Use JB-8011 For Intake and Exhaust Valves, Cylinders 1, 4, 6, 7Use JB-2079 For Intake and Exhaust Valves, Cylinders 2, 3, 5, 8Active Fuel Management Engine	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	362303RG	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear Guide For AFM. Guide Only. 12571608	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	362303FG	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear Guide For AFM. Guide Only. 12571596	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	362148	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Roller Fitment notes — QUALCAST 362148 Hydraulic Roller Hydraulic Roller Type	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	362303	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Roller Fitment notes — QUALCAST 362303 Hydraulic Roller 3.785 OAL AFM "DE-AC". GM # 12639516 3.785 OAL. AFM. "DE-AC". GM # 12639516	View on Amazon
SBI Fits: all 2012 Escalade engines	VL559	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.842 Body Diameter Fitment notes — SBI VL559 Intake and Exhaust0.842 Body Diameter2.600 LengthHydraulic Roller TypeOil Hole is Positioned In Line with Roller Pin.Non-Active Fuel ManagementOEM # 17122490	View on Amazon
SBI Fits: all 2012 Escalade engines	VL558	🇺🇸 US 🇨🇦 CA	Active Fuel Mgmt. Hydraulic Roller Type Fitment notes — SBI VL558 Active Fuel Mgmt. Hydraulic Roller Type Intake and Exhaust0.842 Body Diameter3.760 Lengthwith SpringDynamic Fuel ManagementNote: Replaces Previous AFM Lifterit is Recommended To Replace In Sets.	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	HT2148AB	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148AB Hydraulic Roller Lifters Active Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 and HT-2320 For Intake and Exhaust on Cylinder 1,4,6,7Riveted Retaining Pin Fits: Escalade EXTActive Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2358Riveted Retaining Pinor Escalade Base Model or Escalade ESVActive Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 and HT-2320 For Intake and Exhaust on Cylinder 1,4,6,7Riveted Retaining Pin	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	HT2148A	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Hydraulic Roller Lifters Fitment notes — SEALED POWER HT2148A Hydraulic Roller Lifters Active Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 and HT-2320 For Intake and Exhaust on Cylinder 1,4,6,7Riveted Retaining Pin Fits: Escalade EXTActive Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2358Riveted Retaining Pinor Escalade Base Model or Escalade ESVActive Fuel Management EngineHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 and HT-2320 For Intake and Exhaust on Cylinder 1,4,6,7Riveted Retaining Pin	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	HT2320	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Do Not Use this Lifter in Dynamic Fuel Management (DFM) EnginesHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8 Fitment notes — SEALED POWER HT2320 Do Not Use this Lifter in Dynamic Fuel Management (DFM) EnginesHT-2148A For Intake and Exhaust on Cylinder 2,3,5,8Active Fuel Management Engine	View on Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Lifter Guide

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	12669185	🇺🇸 US 🇨🇦 CA	Rear	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	12669184	🇺🇸 US 🇨🇦 CA	Front	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	MLG101	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Front	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	EG608	🇺🇸 US	Composite Fitment notes — ENGINETECH EG608 Composite RearEngine VIN Code 5,J,Ywith AFM (cylinder deactivation) RearEngine VIN Code 8,F,Jwith AFM (cylinder deactivation)	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	EG596	🇺🇸 US	Composite Fitment notes — ENGINETECH EG596 Composite FrontEngine VIN Code 5,J,Ywith AFM (cylinder deactivation) FrontEngine VIN Code 8,F,Jwith AFM (cylinder deactivation)	View on Amazon
ENGINETECH Fits: all 2012 Escalade engines	EG365	🇺🇸 US 🇨🇦 CA	Composite Fitment notes — ENGINETECH EG365 Composite Fits: Engine VIN code B,G,H,K,Nwithout Active Fuel Management (Cylinder Deactivation) or: Complete lifter guide SetEngine VIN code B,G,H,K,Nwithout Active Fuel Management (Cylinder Deactivation) Composite lifter guides Escalade EXTComplete lifter guide SetEngine VIN Code 2without Active Fuel Management (Cylinder Deactivation) Composite lifter guides	View on Amazon
MELLING Fits: all 2012 Escalade engines	MLG102	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Rear	View on Amazon
SBI Fits: all 2012 Escalade engines	VL558FG	🇺🇸 US 🇨🇦 CA	Intake and ExhaustAFM Lifter Guide - Front Type Fitment notes — SBI VL558FG Intake and ExhaustAFM Lifter Guide - Front TypeOEM # 12571596	View on Amazon
SBI Fits: all 2012 Escalade engines	VL558RG	🇺🇸 US 🇨🇦 CA	Intake and ExhaustAFM Lifter Guide-Rear Type Fitment notes — SBI VL558RG Intake and ExhaustAFM Lifter Guide-Rear TypeOEM # 12571608	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	HT2323K	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	RearActive Fuel Management Engine	View on Amazon
SEALED POWER Fits: all 2012 Escalade engines	HT2322K	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	FrontActive Fuel Management Engine	View on Amazon

This table covers the guides that keep each lifter aligned.

Valve Seat

Brand	Part Number	Markets	Notes	Buy
QUALCAST Popular Fits: 6.0L V8 ELECTRIC/GAS	21162564	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21162564 INSERT Exhaust1.335T I.D. 1-5/8 O.D. 0.420 Depth	View on Amazon
SBI Popular Fits: 6.0L V8 ELECTRIC/GAS	SB162564	🇺🇸 US 🇨🇦 CA	High ChromeFor Aluminum Cylinder Head Fitment notes — SBI SB162564 High ChromeFor Aluminum Cylinder Head Exhaust1-5/8 O.D.1.335T I.D.0.4200 Depth	View on Amazon
SBI Popular Fits: 6.2L V8	SB225050	🇺🇸 US 🇨🇦 CA	High ChromeFor Aluminum Cylinder Head Fitment notes — SBI SB225050 High ChromeFor Aluminum Cylinder Head Intake2-1/4 O.D.1-7/8 I.D.3/8 DepthNote: Universal Repair SeatRequires 2-1/4" Cutter	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	ST162564	🇺🇸 US	Hi-Chrome1.335/1.387T X 1.6320 X .4200" Fitment notes — ENGINETECH ST162564 Hi-Chrome1.335/1.387T X 1.6320 X .4200" ExhaustEngine VIN code JFlex fuel45 Degree	View on Amazon
QUALCAST Fits: 6.0L V8 ELECTRIC/GAS	21206251	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21206251 INSERT Intake1.750 I.D. 2-1/16 O.D. 0.390 Depth	View on Amazon
QUALCAST Fits: 6.0L V8 ELECTRIC/GAS	21162564N	🇺🇸 US 🇨🇦 CA	INSERT Fitment notes — QUALCAST 21162564N INSERT Exhaust1.335T I.D. 1-5/8 O.D. 0.4200 Depth. LPG	View on Amazon
QUALCAST Fits: 6.2L V8	2216343	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	INSERT Fitment notes — QUALCAST 2216343 INSERT Exhaust1.466 I.D. 1.634 O.D. 0.300 Depth	View on Amazon
QUALCAST Fits: 6.2L V8	2216343N	🇺🇸 US	ExhaustBase Model Fitment notes — QUALCAST 2216343N ExhaustBase ModelLuxuryPlatinumPremium1.466 I.D. 1.634 O.D. 0.300 Depth. Non-Magnetic Nickel Material CNG	View on Amazon
SBI Fits: 6.0L V8 ELECTRIC/GAS	SB206251	🇺🇸 US 🇨🇦 CA	High ChromeFor Aluminum Cylinder Head Fitment notes — SBI SB206251 High ChromeFor Aluminum Cylinder Head Intake2-1/16 O.D.1.750T I.D.0.3900 Depth	View on Amazon
SBI Fits: 6.2L V8	SB1634E3	🇺🇸 US 🇨🇦 CA	High ChromeFor Cast Iron Cylinder Head Fitment notes — SBI SB1634E3 High ChromeFor Cast Iron Cylinder Head Exhaust1.634 O.D.1.360T I.D.0.3000 DepthServices Factory Installed Seat	View on Amazon
SBI Fits: 6.2L V8	SB1634E3PM	🇺🇸 US 🇨🇦 CA	Powdered MetalFor Cast Iron Cylinder Head Fitment notes — SBI SB1634E3PM Powdered MetalFor Cast Iron Cylinder Head Exhaust1.634 O.D.1.360T I.D.0.3000 DepthServices Factory Installed Seat.	View on Amazon

This table covers the Valve seats.

Valve Spring

High Performance

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: 6.0L V8 ELECTRIC/GAS	466594	🇺🇸 US 🇨🇦 CA	High PerformanceNo Warranty Fitment notes — MELLING 466594 High PerformanceNo Warranty 151 Pounds At 1.800 Inches417 Pounds At 1.15 InchesSpring Rate: 409 PoundsMax Lift: 0.650"Solid Height: 1.080"1.304 Inch Out Side Spring O.D.0.670 Inner Spring I.D.	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	466524	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 466524 High PerformanceNo Warranty Up to 0.600 lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	466564	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 466564 High PerformanceNo Warranty Closed Pressure And Length Is 147 @ 1.800Open Pressure And Length Is 406 @ 1.230with Dual Springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	466734	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 466734 High PerformanceNo Warranty Dual SpringO.D. 1.295"I.D. 0.676"Closed Pressure and Length 125.4 @ 1.800Open Pressure and Length 370.4 @ 1.150Solid Height 1.100 Inches	View on Amazon
MELLING Fits: all 2012 Escalade engines	461218	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance Fitment notes — MELLING 461218 High Performance Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: all 2012 Escalade engines	466944	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 466944 High PerformanceNo Warranty Single SpringO.D. 1.300"I.D. 0.675"Closed Pressure and Length 125 @ 1.800Open Pressure and Length 370 @ 1.150Solid Height 1.000 Inches	View on Amazon
MELLING Fits: all 2012 Escalade engines	225716	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 225716 High PerformanceNo Warranty Set of 16Installed Pressure 95 PSIOpen Pressure 300 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: all 2012 Escalade engines	461208	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 461208 High PerformanceNo Warranty Dual SpringO.D. 1.350"I.D. 0.704"Closed Pressure and Length 160 @ 1.800Open Pressure and Length 482 @ 1.100Solid Height 1.045 Inches	View on Amazon
MELLING Fits: all 2012 Escalade engines	461219	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceNo Warranty Fitment notes — MELLING 461219 High PerformanceNo Warranty Closed Pressure And Length Is 135 @ 1.800Open Pressure And Length Is 348 @ 1.175with Dual Springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	4669416	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance Fitment notes — MELLING 4669416 High Performance Set of 16Installed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	VSK46659	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46659 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 151 PSIOpen Pressure 417 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK2257	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	VSK46656	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46656 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 147 PSIOpen Pressure 406 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK461208	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK461208 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK461219	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46652	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Steel RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46694	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Steel RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46673	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46673 High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK2257T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK2257T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 95.0 PSIOpen Pressure 300.0 PSIFor Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK461208T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK461208T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 160 PSIOpen Pressure 482 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	VSK46659T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46659T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 151 PSIOpen Pressure 417 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK461219T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK461219T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 135.0 PSIOpen Pressure 348.0 PSI	View on Amazon
MELLING Fits: 6.0L V8 ELECTRIC/GAS	VSK46656T	🇺🇸 US 🇨🇦 CA	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46656T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 147 PSIOpen Pressure 406 PSIStandard Finished Valve Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46652T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46652T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem SealsNo Warranty Valve Spring Kit with Titanium RetainersClosed Pressure 130.0 PSIOpen Pressure 325.4 PSIUp To 0.600 Lift	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46694T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Fitment notes — MELLING VSK46694T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals Valve Spring Kit with Titanium RetainersClosed Pressure 145 PSIOpen Pressure 358 PSI	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46697T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46697T High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46673T	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium Retainers Fitment notes — MELLING VSK46673T High PerformanceKit Contains: Valve Locks, Spring Retainers, Valve Stem Seals, Titanium RetainersNo Warranty Installed Pressure 125 PSIOpen Pressure 370 PSIStandard Finished Valve Spring	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: all 2012 Escalade engines	ERV3598	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Conical Fitment notes — ENGINETECH ERV3598 Conical Intake and Exhaust 2.126 Free HT Fits: Intake and ExhaustEscalade EXTEngine VIN Code 2,8,FIntake or Exhaust2.126" Free Heightor Intake and ExhaustEscalade Base Model or Escalade ESVEngine VIN Code 2,8,FIntake or Exhaust2.126" Free Height	View on Amazon
GM GENUINE Popular Fits: all 2012 Escalade engines	12706568	🇺🇸 US 🇨🇦 CA	Spring Type: Single	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	VS2254	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Not For Use with MTC-7, MTC-8 Camshafts	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	VS2257	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	For Use with MTC-7, MTC-8 Camshafts	View on Amazon
SBI Popular Fits: all 2012 Escalade engines	1601488	🇺🇸 US 🇨🇦 CA	Intake and Exhaust2.130 Length Fitment notes — SBI 1601488 Intake and Exhaust2.130 Length1.257T O.D.0.845T I.DConical	View on Amazon
MELLING Fits: all 2012 Escalade engines	VTSS100	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance Fitment notes — MELLING VTSS100 High Performance Setup Spring	View on Amazon
MELLING Fits: all 2012 Escalade engines	46697	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High Performance Fitment notes — MELLING 46697 High Performance Closed Pressure 151 PSIStainless Steel Dual springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSK46697	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel Retainers Fitment notes — MELLING VSK46697 High PerformanceIncludes Valve Locks, Spring Retainers, Valve Stem Seals, Stainless Steel RetainersSuper Finished Valve Spring Installed Pressure 151 PSIOpen Pressure 417 PSI	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	3204046	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	2.126 Free Length. Conical	View on Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: all 2012 Escalade engines	10166344	🇺🇸 US 🇨🇦 CA	EXH	View on Amazon
MELLING Popular Fits: all 2012 Escalade engines	475264	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceHardened Steel Fitment notes — MELLING 475264 High PerformanceHardened SteelNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	VSR709	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
MELLING Fits: all 2012 Escalade engines	475274	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceHardened Steel Fitment notes — MELLING 475274 High PerformanceHardened SteelNo Warranty For Use with Dual Springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	475284	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceTitanium Fitment notes — MELLING 475284 High PerformanceTitaniumNo Warranty For Use with Beehive Springs	View on Amazon
MELLING Fits: all 2012 Escalade engines	475294	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	High PerformanceTitanium Fitment notes — MELLING 475294 High PerformanceTitaniumNo Warranty For Use with Dual Springs	View on Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: all 2012 Escalade engines	VL760	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ENGINETECH Fits: 6.2L V8	EPC291	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Fits Escalade Base Model or Escalade ESVSingle Round Groov Fitment notes — ENGINETECH EPC291 Fits: Escalade Base Model or Escalade ESVSingle Round Groov or: Escalade EXTSingle Round Groove	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	10166345	🇺🇸 US 🇨🇦 CA	Material: Alloy Steel	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	345005	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	0.314 Stem. Round Bead In Middle.	View on Amazon
SBI Fits: all 2012 Escalade engines	1211085	🇺🇸 US 🇨🇦 CA	Intake and Exhaust0.2900 Length Fitment notes — SBI 1211085 Intake and Exhaust0.2900 Length1 Round bead type0.3100 I.D.	View on Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand	Part Number	Markets	Notes	Buy
ENGINETECH Popular Fits: 6.2L V8	S900V	🇺🇸 US	Viton Fitment notes — ENGINETECH S900V Viton Fits: ExhaustIntake and Exhaust Vitonor IntakeIntake and Exhaust Viton	View on Amazon
FEL-PRO Popular Fits: all 2012 Escalade engines	SS71039	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — FEL-PRO SS71039 Set Intake and Exhaust	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	SS45921	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Metal with Molded RubberSet Fitment notes — MAHLE / CLEVITE SS45921 Metal with Molded RubberSet IntakePositive type	View on Amazon
MAHLE / CLEVITE Popular Fits: all 2012 Escalade engines	SS45920	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetMetal with Molded Rubber Fitment notes — MAHLE / CLEVITE SS45920 SetMetal with Molded Rubber ExhaustPositive Type	View on Amazon
APEX Fits: all 2012 Escalade engines	AVS3072	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Set Fitment notes — APEX AVS3072 Set Intake and Exhaust	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	876100	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1 Fitment notes — ELRING 876100 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,1Valve Stem Diameter [MM]: 8,5 Intake	View on Amazon
ELRING Fits: 6.0L V8 ELECTRIC/GAS	876110	🇺🇸 US 🇨🇦 CA	Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2 Fitment notes — ELRING 876110 Material: FPM (fluoride rubber)Outer Diameter [MM]: 30,2Valve Stem Diameter [MM]: 8,5 Exhaust	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12482063	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482063 SetContains 8 Seals Intakewith Spring Shim14.4mm	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12482062	🇺🇸 US 🇨🇦 CA	SetContains 8 Seals Fitment notes — GM GENUINE 12482062 SetContains 8 Seals Exhaust22.8MM	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	3890045	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Viton Top Hat Fitment notes — QUALCAST 3890045 Viton Top Hat Intake	View on Amazon
QUALCAST Fits: all 2012 Escalade engines	3890145	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Viton Top Hat Fitment notes — QUALCAST 3890145 Viton Top Hat Exhaust	View on Amazon
SBI Fits: all 2012 Escalade engines	1221337	🇺🇸 US 🇨🇦 CA	IntakeViton Material Fitment notes — SBI 1221337 IntakeViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
SBI Fits: all 2012 Escalade engines	1221338	🇺🇸 US 🇨🇦 CA	ExhaustViton Material Fitment notes — SBI 1221338 ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter	View on Amazon
ULTRA-POWER Fits: all 2012 Escalade engines	SS71039	🇺🇸 US 🇨🇦 CA	SetPremium Valve Stem Seals Included Fitment notes — ULTRA-POWER SS71039 SetPremium Valve Stem Seals Included16 Pieces EXHAUSTINTAKE	View on Amazon
VICTOR REINZ Fits: all 2012 Escalade engines	121003401	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	SetContains 16 Pieces Fitment notes — VICTOR REINZ 121003401 SetContains 16 PiecesImproved Design Intake and Exhaust	View on Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Popular Fits: all 2012 Escalade engines	916865	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control	View on Amazon
DORMAN Popular Fits: all 2012 Escalade engines	916886XD	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	OE FixAdjuster Magnet Fitment notes — DORMAN 916886XD OE FixAdjuster Magnet IMPROVED DESIGN	View on Amazon
GATES Fits: all 2012 Escalade engines	VVS273	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control Valve	View on Amazon
HOLSTEIN Fits: all 2012 Escalade engines	2VTS0059	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
ROSTRA Fits: all 2012 Escalade engines	790065	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control	View on Amazon
WALKER PRODUCTS Fits: 6.2L V8	5901191	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
WELLS Fits: all 2012 Escalade engines	2T1031	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control	View on Amazon
WELLS Fits: all 2012 Escalade engines	2T1241	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Adjuster Magnet	View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
MELLING Popular Fits: all 2012 Escalade engines	VCTO1000	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12653140	🇺🇸 US 🇨🇦 CA	Adjuster Magnet Fitment notes — GM GENUINE 12653140 Adjuster Magnet MUST Use with 12663001	View on Amazon
GM GENUINE Fits: all 2012 Escalade engines	12682000	🇺🇸 US 🇨🇦 CA	Thread Size: .629	View on Amazon
S.A. GEAR Fits: 6.2L V8	S1434S	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control Fitment notes — S.A. GEAR S1434S Oil Control Oil Control Valve	View on Amazon
STANDARD MOTOR PRODUCTS Fits: all 2012 Escalade engines	VVT324	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Oil Control	View on Amazon
STANDARD MOTOR PRODUCTS Fits: all 2012 Escalade engines	VVT310	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Adjuster Magnet	View on Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Fits: all 2012 Escalade engines	12594339	🇺🇸 US 🇨🇦 CA		View on Amazon
MAHLE / CLEVITE Fits: all 2012 Escalade engines	B32279	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Variable Valve Timing (VVT) Sensor SealRubber	View on Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Sprocket

Economy

Brand	Part Number	Markets	Notes	Buy
DORMAN Fits: 6.2L V8	918186	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

Standard Replacement

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.2L V8	12606358	🇺🇸 US 🇨🇦 CA	Mount Hole Diameter (mm): 21.009mm	View on Amazon
MELLING Popular Fits: 6.2L V8	VCTA1007H	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Service Grade	View on Amazon
CLOYES Fits: 6.2L V8	VC143	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Variable Valve Timing (VVT) Sprocket	View on Amazon
ENGINETECH Fits: 6.2L V8	ECP1007	🇺🇸 US	Aftermarket TypeOne Per engine	View on Amazon
GATES Fits: 6.2L V8	VCP855	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8	G58358	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Do Not Re-Use VVT Oil Control ValveMust Be Replaced Upon Re-Assembly	View on Amazon
S.A. GEAR Fits: 6.2L V8	S1434	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Cam VVT	View on Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8	VVT590	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon
WELLS Fits: 6.2L V8	3T1077	🇺🇸 US 🇨🇦 CA 🇲🇽 MX		View on Amazon

Brand	Part Number	Markets	Notes	Buy
GM GENUINE Popular Fits: 6.0L V8 ELECTRIC/GAS	12602699	🇺🇸 US 🇨🇦 CA	4 speed Automatic trans.	View on Amazon
ENGINETECH Fits: 6.0L V8 ELECTRIC/GAS	ECP1007	🇺🇸 US	Aftermarket TypeOne Per engine	View on Amazon
PREFERRED COMPONENTS INC Fits: 6.0L V8 ELECTRIC/GAS	G58432	🇺🇸 US 🇨🇦 CA		View on Amazon
STANDARD MOTOR PRODUCTS Fits: 6.0L V8 ELECTRIC/GAS	VVT628	🇺🇸 US 🇨🇦 CA		View on Amazon
WELLS Fits: 6.0L V8 ELECTRIC/GAS	3T1060	🇺🇸 US 🇨🇦 CA		View on Amazon

This table covers the cam phaser sprockets used by the variable-valve-timing system.

Variable Valve Timing (VVT) Sprocket Bolt

Brand	Part Number	Markets	Notes	Buy
CLOYES Fits: all 2012 Escalade engines	VTS156	🇺🇸 US 🇨🇦 CA 🇲🇽 MX	Engine Variable Valve Timing (VVT) Sprocket Bolt	View on Amazon

This table covers the Variable Valve Timing (VVT) Sprocket bolts.