2021 Cadillac Escalade Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

294 Engine parts are listed for the 2021 Cadillac Escalade, in 97 part types, covering both the 3.0L L6 DIESEL Turbocharged and the 6.2L V8. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 2021 Cadillac Escalade covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Timing Chain & Component Kit (14 parts), Motor Mount (13 parts) and Oil Filter (13 parts). The other 94 part types cover the remaining 254 parts.

Camshaft

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12664912
🇺🇸 US 🇨🇦 CA
Exhaust Duration at .050 inch Lift: 372 DD
View on
Amazon
MELLING Fits: 6.2L V8 MC1435
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade Base Model
View on
Amazon
MELLING Fits: 6.2L V8 MC1437
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
AFM Delete CamshaftThe Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software.
Fitment notes — MELLING MC1437
AFM Delete CamshaftThe Vehicles Engine Control Module/Power Train Control Module Must be Reprogrammed To Turn Off The Active Fuel Management System In The Operating Software.The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.
View on
Amazon
MELLING Fits: 6.2L V8 MC1436
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV
View on
Amazon

This table covers the camshafts that open the valves.

Camshaft Bearing

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12679049
🇺🇸 US 🇨🇦 CA
Position # 4(V6) or Position # 5
View on
Amazon
GM GENUINE Fits: 6.2L V8 12686894
🇺🇸 US 🇨🇦 CA
COMPLETE ENGINE
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 SH2231S
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
CoatedHigh Performance
Fitment notes — MAHLE / CLEVITE SH2231S
CoatedHigh Performance
Escalade ESV
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Camshaft Bolt

Brand Part Number Markets Notes Buy
ELRING Fits: 6.2L V8 857390
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Retainer Bolt
View on
Amazon
GM GENUINE Fits: 6.2L V8 11561455
🇺🇸 US 🇨🇦 CA
M8X1.25X15 or M6 X 1.0 X 15.5Retainer Bolt
View on
Amazon

This table covers the Camshaft bolts.

Camshaft Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 24575061
🇺🇸 US 🇨🇦 CA
Outside Diameter (In): 0.185 In
Fitment notes — GM GENUINE 24575061
Outside Diameter (In): 0.185 In
17MM LONG
View on
Amazon

This table covers the Camshaft Dowel pins.

Camshaft Follower Guide

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12709452
🇺🇸 US 🇨🇦 CA
Material: Steel
View on
Amazon

This table covers the Camshaft Follower guides.

Camshaft Retainer / Thrust Plate

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.2L V8 45745
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
View on
Amazon
FEL-PRO Fits: 6.2L V8 ES73115
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Camshaft retainer plate & mounting bolts includedComplete Set
Fitment notes — FEL-PRO ES73115
Camshaft retainer plate & mounting bolts includedComplete Set
Will Service Both Recessed Bolt Holes & Flat-Type Bolt Holes
View on
Amazon
GM GENUINE Fits: 6.2L V8 12589016
🇺🇸 US 🇨🇦 CA
Includes Seal
View on
Amazon
MELLING Fits: 6.2L V8 MF127
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 01713900
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Connecting Rod

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12714549
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the connecting rods between each piston and the crankshaft.

Connecting Rod Bearing

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 BB622J
🇺🇸 US
Set
Fitment notes — ENGINETECH BB622J
Set
Bimetal, polymer coated
View on
Amazon
GM GENUINE Fits: 6.2L V8 12735504
🇺🇸 US 🇨🇦 CA
Contains 2 Bearing Inserts
Fitment notes — GM GENUINE 12735504
Contains 2 Bearing Inserts
Standard
View on
Amazon

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Connecting Rod Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11548432
🇺🇸 US 🇨🇦 CA
Single UseM9X1X44
View on
Amazon

This table covers the Connecting Rod bolts.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 54290100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 CS54996
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 129400
🇺🇸 US
Remanufactured
Fitment notes — ENGINETECH 129400
Remanufactured
Rod and Main Bearings IncludedCasting # 7576
View on
Amazon
GM GENUINE Fits: 6.2L V8 12710954
🇺🇸 US 🇨🇦 CA
Optional with 12674745
View on
Amazon

This table covers the crankshafts that turn piston motion into rotation.

Crankshaft Main Bearing

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12729655
🇺🇸 US 🇨🇦 CA
COMPLETE KIT POSITIONS 1-5
View on
Amazon

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Main Bearing Cap Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11546565
🇺🇸 US 🇨🇦 CA
Single UseM8X1.25X25
Fitment notes — GM GENUINE 11546565
Single UseM8X1.25X25Hex Flange
View on
Amazon
GM GENUINE Fits: 6.2L V8 11548076
🇺🇸 US 🇨🇦 CA
M10X2X96
View on
Amazon
GM GENUINE Fits: 6.2L V8 11548075
🇺🇸 US 🇨🇦 CA
M10X2X82
View on
Amazon

This table covers the Crankshaft Main Bearing Cap bolts.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 BS40765
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS40765
PTFE RubberIncludes Sleeve
Rear1 Piece
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12634614
🇺🇸 US 🇨🇦 CA
Material: Steel PlasticSeal Type: Spring Loaded Multi Lip
Fitment notes — GM GENUINE 12634614
Material: Steel PlasticSeal Type: Spring Loaded Multi LipFront
View on
Amazon
APEX Fits: 6.2L V8 ATC13510
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Seal Only
Fitment notes — APEX ATC13510
Seal Only
Front
View on
Amazon
APEX Fits: 6.2L V8 ABS1351
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon
APEX Fits: 6.2L V8 ABS1355
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rearwith Housing
View on
Amazon
FEL-PRO Fits: 6.2L V8 TCS46221
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontRecommend replacing Engine Crankshaft Pulley Bolt with FEL-Pro 73372
View on
Amazon
GM GENUINE Fits: 6.2L V8 12665076
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 811058700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 811058800
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rear
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal Cover

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.2L V8 635786
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 12705663
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the Crankshaft Seal covers.

Crankshaft Seal Gasket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12627520
🇺🇸 US 🇨🇦 CA
Black
Fitment notes — GM GENUINE 12627520
Black
Rear
View on
Amazon

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Deactivation Delete

Brand Part Number Markets Notes Buy
MELLING Fits: 6.2L V8 MDK700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESVDoes Not Include HP engine tuner for disabling the AFM in the engine control module
Fitment notes — MELLING MDK700
Escalade ESVDoes Not Include HP engine tuner for disabling the AFM in the engine control moduleWhen Installing A Delete CAM, The Active Fuel Management Lifters Must be Replaced Using Non-Active Fuel Management Lifters.The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.The VLOM Must be Replaced with A Non-Active Fuel Management Valley Cover.Push
View on
Amazon
MELLING Fits: 6.2L V8 MDK700HPT3
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
When Installing A Delete CAM, The Active Fuel Management Lifters Must be Replaced Using Non-Active Fuel Management Lifters.The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.
Fitment notes — MELLING MDK700HPT3
When Installing A Delete CAM, The Active Fuel Management Lifters Must be Replaced Using Non-Active Fuel Management Lifters.The Valve Lifter Guides Used In Non-Active Fuel Management Engines Are Different From Those Used In Active Fuel Management Engines and Must be Replaced When Installing The Non-Active Fuel Management Lifters.The VLOM Must be Replaced with A Non-Active Fuel Management Valley Cover.
View on
Amazon
MELLING Fits: 6.2L V8 MDK701HPT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Escalade ESV
View on
Amazon

This table covers the kits that disable cylinder deactivation.

Cylinder Deactivation Solenoid

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12747732
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Cylinder Head

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12699617
🇺🇸 US 🇨🇦 CA
Exhaust Valve Diameter: 1.59 In
Fitment notes — GM GENUINE 12699617
Exhaust Valve Diameter: 1.59 In
Except Vehicle Requires 2022 Model Year Parts (AMK)
View on
Amazon

This table covers the cylinder heads that close the top of the block.

Cylinder Head Alignment Dowel Pin

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12570326
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head Alignment Dowel pins.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 11546959
🇺🇸 US 🇨🇦 CA
M12X1.75X134
View on
Amazon
AJUSA Fits: 6.2L V8 81074000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 6.2L V8 ES73121
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO ES73121
Set
Head Bolts with Washers
View on
Amazon
GM GENUINE Fits: 6.2L V8 11611976
🇺🇸 US 🇨🇦 CA
M12X1.75X102
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 GS33938
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Cylinder Head Bolt KitSet
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 26749PT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Perma TorqueMLS
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12688943
🇺🇸 US 🇨🇦 CA
NEW HEAD BOLTS REQ'D WHEN HEAD IS REMOVED
View on
Amazon
AJUSA Fits: 6.2L V8 10254400
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10254400
Multi Layered Steel
104 Bore Diameter
View on
Amazon
APEX Fits: 6.2L V8 AHG1356
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 55332
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Multi-Layered Steel
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 611134600
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 52582800
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 19433116
🇺🇸 US 🇨🇦 CA
Contains Head Gaskets (Quantity 2), Exhaust Manifold Gaskets (Quantity 2), Intake Gaskets (Quantity 8), Valve Cover Gaskets (Quantity 2) and Throttle Body Gasket (Quantity 1)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 HS55332A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Head Plug

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 24502262
🇺🇸 US 🇨🇦 CA
1.014 OD,.32 THK,FROM .05 THK 304 STAINLESS
View on
Amazon

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Engine Block Drain Plug

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11602951
🇺🇸 US 🇨🇦 CA
M28X1.25X18
View on
Amazon
GM GENUINE Fits: 6.2L V8 11546667
🇺🇸 US 🇨🇦 CA
Thread Diameter (In): 0.63 In
Fitment notes — GM GENUINE 11546667
Thread Diameter (In): 0.63 In
M16X1.5X16.25
View on
Amazon

This table covers the Engine Block drain plugs.

Engine Block Heater

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12586687
🇺🇸 US 🇨🇦 CA
Fits Engine Block Heater (K05)
Fitment notes — GM GENUINE 12586687
Fits:
Engine Block Heater (K05)
or:
Single UseEngine Block Heater Accessory (VSY), Dealer Ordered and Dealer Install Option/Accessory Part Package (YM8)
View on
Amazon

This table covers the block heaters that warm the coolant or oil in cold weather.

Engine Cover

Brand Part Number Markets Notes Buy
TECHPRO Popular Fits: 6.2L V8 GM1228179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
CAPA Certified
Fitment notes — TECHPRO GM1228179
CAPA Certified
LowerExtension Assembly [CAPA Certified]
View on
Amazon
TECHPRO Fits: 6.2L V8 GM1228182
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Lower
View on
Amazon
TECHPRO Fits: 6.2L V8 GM1228173
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Lower4WD
Fitment notes — TECHPRO GM1228173
Lower4WDTransfer Case Skid Plate
View on
Amazon
VARIOUS MFR Fits: 6.2L V8 GM1228179
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
LowerExtension Assembly
View on
Amazon
VARIOUS MFR Fits: 6.2L V8 GM1228182
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Lower
View on
Amazon

This table covers the Engine covers.

Engine Cover Grommet

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12594875
🇺🇸 US 🇨🇦 CA
Material: Rubber
Fitment notes — GM GENUINE 12594875
Material: Rubber
Top
View on
Amazon

This table covers the Engine Cover grommets.

Engine Cover Retainer / Clip

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 10121502
🇺🇸 US 🇨🇦 CA
Head OD=17.8, Lengthfor 6.25mm Hole
Fitment notes — GM GENUINE 10121502
Head OD=17.8, Lengthfor 6.25mm Hole5.8mm O.D. X 26.9MM Long
View on
Amazon

This table covers the Engine Cover retainers and clips.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 6.2L V8 50530700
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Exhaust Valve

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12678746
🇺🇸 US 🇨🇦 CA
Valve Head Diameter: 0.86 In
View on
Amazon
MELLING Fits: 6.2L V8 V5815
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
QUALCAST Fits: 6.2L V8 1030815
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
1.594 Head Diameter.
View on
Amazon

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Harmonic Balancer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12680364
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 73372
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 11547372
🇺🇸 US 🇨🇦 CA
Single UseM16X2X103
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12748172
🇺🇸 US 🇨🇦 CA
View on
Amazon
VAICO Fits: 6.2L V8 V570113
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.

Intake Manifold Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11610472
🇺🇸 US 🇨🇦 CA
M6X1X50.65
View on
Amazon
GM GENUINE Fits: 6.2L V8 11611692
🇺🇸 US 🇨🇦 CA
M6X2.65X30
View on
Amazon

This table covers the Intake Manifold bolts.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 MS97402
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO MS97402
Set
Lower
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12626354
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon
FEL-PRO Fits: 6.2L V8 MS97432
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO MS97432
Set
Valley Pan
View on
Amazon
GM GENUINE Fits: 6.2L V8 12693081
🇺🇸 US 🇨🇦 CA
Single UseValley Pan
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 MS20607
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber
Fitment notes — MAHLE / CLEVITE MS20607
SetMolded Rubber
Valley Pan
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 MS19945
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Valve

Brand Part Number Markets Notes Buy
MELLING Fits: 6.2L V8 V5814
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Solid Valve Stem
View on
Amazon
MELLING Fits: 6.2L V8 V5814HS
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hollow Valve Stem
View on
Amazon
QUALCAST Fits: 6.2L V8 1030814
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
2.125 Head Diameter.
View on
Amazon

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Motor Mount

Brand Part Number Markets Notes Buy
ANCHOR Popular Fits: 6.2L V8 3556
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftReuse OE Heat Shield
Fitment notes — ANCHOR 3556
Front LeftReuse OE Heat ShieldReuse OE BracketHydraulic
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 85806750
🇺🇸 US 🇨🇦 CA
Mounting Hardware Included: YES
Fitment notes — GM GENUINE 85806750
Mounting Hardware Included: YES
Right
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 85806751
🇺🇸 US 🇨🇦 CA
Mounting Hardware Included: YES
Fitment notes — GM GENUINE 85806751
Mounting Hardware Included: YES
Left
View on
Amazon
ANCHOR Fits: 6.2L V8 3557
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightReuse OE Heat Shield
Fitment notes — ANCHOR 3557
Front RightReuse OE Heat ShieldReuse OE BracketHydraulic
View on
Amazon
ANCHOR Fits: 6.2L V8 3585
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Leftwith Heat Shield
Fitment notes — ANCHOR 3585
Front Leftwith Heat ShieldHydraulic
View on
Amazon
ANCHOR Fits: 6.2L V8 3586
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Rightwith Heat Shield
Fitment notes — ANCHOR 3586
Front Rightwith Heat ShieldHydraulic
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 6.2L V8 A20022
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Front LeftEscalade Base Model
Fitment notes — DEA / MARMON RIDE CONTROL A20022
Fits:
Front LeftEscalade Base Model
or:
Front Left4WDEscalade ESV
View on
Amazon
DEA / MARMON RIDE CONTROL Fits: 6.2L V8 A20021
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightEscalade Base Model
View on
Amazon
PIONEER Fits: 6.2L V8 610016
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front Leftwithout Bracket
Fitment notes — PIONEER 610016
Front Leftwithout Bracketwithout Heatshield
View on
Amazon
PIONEER Fits: 6.2L V8 613585
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front LeftComplete Assembly
View on
Amazon
PIONEER Fits: 6.2L V8 613586
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front RightCOMPLETE ASSEMBLY
View on
Amazon
WESTAR Fits: 6.2L V8 EM4446
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Leftwith Heat Shield
View on
Amazon
WESTAR Fits: 6.2L V8 EM4447
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rightwith Heat Shield
View on
Amazon

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.

Motor Mount Kit

Brand Part Number Markets Notes Buy
ANCHOR Fits: 6.2L V8 300852
🇺🇸 US
RWDwith Engine Mounts Reuse OE Brackets
Fitment notes — ANCHOR 300852
RWDwith Engine Mounts Reuse OE Bracketswith Engine Mounts Reuse OE Heat Shieldswith Hydraulic Engine Mounts
View on
Amazon
ANCHOR Fits: 6.2L V8 300854
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
4WDwith Engine Mounts Reuse OE Brackets
Fitment notes — ANCHOR 300854
4WDwith Engine Mounts Reuse OE Bracketswith Engine Mounts Reuse OE Heat Shieldswith Hydraulic Engine Mounts
View on
Amazon
ANCHOR Fits: 6.2L V8 300963
🇺🇸 US
RWDwith Engine Mount Brackets
Fitment notes — ANCHOR 300963
RWDwith Engine Mount Bracketswith Engine Mount Heat Shieldswith Hydraulic Engine Mounts
View on
Amazon
ANCHOR Fits: 6.2L V8 300962
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
4WDwith Engine Mount Brackets
Fitment notes — ANCHOR 300962
4WDwith Engine Mount Bracketswith Engine Mount Heat Shieldswith Hydraulic Engine Mounts
View on
Amazon

This table covers the Motor Mount kits.

Oil

Summary: Notes list SAE 0W-20 and SAE 0W-40. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include MOBIL, PENTOSIN and ACDELCO.

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 6.2L V8 109302
🇺🇸 US
dexos 1 Gen 2 New Formulation or 0W-20(DEXOS1 GEN 3) X 6Full Synthetic
Fitment notes — ACDELCO 109302
dexos 1 Gen 2 New Formulation or 0W-20(DEXOS1 GEN 3) X 6Full Synthetic1 Quart
View on
Amazon
MOBIL Fits: 6.2L V8 112628
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full Synthetic 0W-40Mobil 1 European Car Formula
Fitment notes — MOBIL 112628
Full Synthetic 0W-40Mobil 1 European Car FormulaFull SyntheticSAE 0W-401 Quart
View on
Amazon
MOBIL Fits: 6.2L V8 126870
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Supercar 0W-401 Quart
View on
Amazon
PENTOSIN Fits: 6.2L V8 8044210
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0W-20-Pentospeed-DEXOS1 GEN31 Liter
View on
Amazon
PENTOSIN Fits: 6.2L V8 8044212
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0W-20-Pentospeed-DEXOS1 GEN35 Liters
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
DORMAN Fits: 6.2L V8 66219
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Seals Two Pipes
View on
Amazon
FEL-PRO Fits: 6.2L V8 73127
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
with Dual Round PortOil Cooler Line
View on
Amazon
GM GENUINE Fits: 6.2L V8 23129010
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 B33562
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Engine Oil Cooler GasketMolded Rubber
Fitment notes — MAHLE / CLEVITE B33562
Engine Oil Cooler GasketMolded Rubber
Oil Cooler Line Dual Round Port
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Cooler Line

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 85136335
🇺🇸 US 🇨🇦 CA
End 1 Type: Straight
View on
Amazon

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Oil Cooler Line Connector

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 84240291
🇺🇸 US 🇨🇦 CA
End Fitting
View on
Amazon

This table covers the harness connectors at the Oil Cooler Line. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Cooler Mounting Kit

Brand Part Number Markets Notes Buy
HAYDEN Fits: 6.2L V8 238
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber Block Mounting Kit for Heavy Duty Oil Cooler
View on
Amazon
HAYDEN Fits: 6.2L V8 153
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Metal Mounting Bracket Kit for Heavy Duty Oil Cooler
View on
Amazon

This table covers the Oil Cooler Mounting kits.

Oil Cooler Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 6.2L V8 B17840
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Dipstick / Tube

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12664925
🇺🇸 US 🇨🇦 CA
Dipstick Only
View on
Amazon

This table covers the Oil Dipstick tubes.

Oil Dipstick / Tube Seal

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 73889
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 24504031
🇺🇸 US 🇨🇦 CA
Single Use6.07 ID
Fitment notes — GM GENUINE 24504031
Single Use6.07 ID1.78 Diameter
View on
Amazon

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 55577568
🇺🇸 US 🇨🇦 CA
M12X1.75X18Hex Head with Internal T45 Torx
View on
Amazon
DORMAN Fits: 6.2L V8 090948CD
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DORMAN Fits: 6.2L V8 090948
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
M12-1.7515MM Hex Head T45 Torx
View on
Amazon
ELRING Fits: 6.2L V8 B07860
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
4WD
View on
Amazon
GM GENUINE Fits: 6.2L V8 12625298
🇺🇸 US 🇨🇦 CA
28.65 OD
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 70820
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber
Fitment notes — FEL-PRO 70820
Rubber
Dished Washer0.410 (in) Inside Diameter x 0.820 (in) Outside Diameter
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12616850
🇺🇸 US 🇨🇦 CA
Single UseDiameter 19.39
View on
Amazon
AJUSA Fits: 6.2L V8 01288800
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
DORMAN Fits: 6.2L V8 097119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber Gasket
Fitment notes — DORMAN 097119
Rubber Gasket
M12 Drain Plug
View on
Amazon
DORMAN Fits: 6.2L V8 97119
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber GasketRubber
Fitment notes — DORMAN 97119
Rubber GasketRubberSizeM12, 7/16"Inside Dia: 0.448"/11.38mmOutside Dia.: 0.811"/20.60mmThickness: 0.102"/2.59mm
M12 Drain Plug
View on
Amazon
FEL-PRO Fits: 6.2L V8 71244
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Rubber
Fitment notes — FEL-PRO 71244
Rubber
Dished Washer0.415 (in) Inside Diameter x 0.740 (in) Outside Diameter
View on
Amazon
VAICO Fits: 6.2L V8 V401110
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 711351300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0.4150 IN Inside Diameter
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Insert

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11503302
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Drain Plug inserts.

Oil Filler Cap

Brand Part Number Markets Notes Buy
ACDELCO Fits: 6.2L V8 12713785
🇺🇸 US 🇨🇦 CA
GM Original Equipment
Fitment notes — ACDELCO 12713785
GM Original Equipment
0W-20
View on
Amazon
CALORSTAT Fits: 6.2L V8 OC2314
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PlasticTwist-On
View on
Amazon
DORMAN Fits: 6.2L V8 90202
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Stamped 0W-20
View on
Amazon
MOTORAD Fits: 6.2L V8 MO190
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filler Cap Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 73193
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Services OEM bonded Cap sealAftermarket Design
Fitment notes — FEL-PRO 73193
Services OEM bonded Cap sealAftermarket Design28 (mm) Inside DiameterSeal
View on
Amazon
GM GENUINE Fits: 6.2L V8 24100002
🇺🇸 US 🇨🇦 CA
Size # 32027.94MM Inner Diameter
View on
Amazon

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Tube

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12691785
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Filler tubes.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FRAM Fits: 6.2L V8 FE10575
🇺🇸 US 🇨🇦 CA
Spin-OnTough Guard or Synthetic Endurance
View on
Amazon
FVP Fits: 6.2L V8 R0255
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
OE# 12690385
View on
Amazon
PRO-TEC Fits: 6.2L V8 PXL10255
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
VARIOUS MFR Fits: 6.2L V8 PG2500
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Popular Fits: 6.2L V8 WL10255XP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
XP Extreme DutyBest for Synthetic Motor Oils
Fitment notes — WIX WL10255XP
XP Extreme DutyBest for Synthetic Motor Oils
Factory filled synthetic oil
View on
Amazon
MOBIL Fits: 6.2L V8 M1212A
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 6.2L V8 PF63
🇺🇸 US 🇨🇦 CA
GM Original Equipment
Fitment notes — ACDELCO PF63
GM Original Equipment
SINGLE USE
View on
Amazon
WIX Popular Fits: 6.2L V8 WL10255
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Factory filled synthetic oil
View on
Amazon
ACDELCO Fits: 6.2L V8 PF63A
🇺🇸 US 🇨🇦 CA
SilverBlack Shell
Fitment notes — ACDELCO PF63A
SilverBlack ShellSpin-On
View on
Amazon
BOSCH Fits: 6.2L V8 3502
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Premium Oil Filter
View on
Amazon
HASTINGS / BALDWIN Fits: 6.2L V8 LF641
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Fits Escalade Base Modelor Escalade ESV
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 OC1047
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Spin-On
View on
Amazon
VARIOUS MFR Fits: 6.2L V8 PG2500EX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Extended Life
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Adapter

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12600225
🇺🇸 US 🇨🇦 CA
Threaded FittingM20XM22
View on
Amazon

This table covers the Oil Filter adapters.

Oil Filter Remote Mounting Kit

Brand Part Number Markets Notes Buy
HAYDEN Fits: 6.2L V8 292
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Filter Relocation Kit. Contains filter mount and engine adapter. Hose Not included.Only For Engines with 22x1.5 mm Filter Thread
View on
Amazon

This table covers the Oil Filter Remote Mounting kits.

Oil Galley Plug

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 OGV2
🇺🇸 US
View on
Amazon
GM GENUINE Fits: 6.2L V8 11546667
🇺🇸 US 🇨🇦 CA
Thread Diameter (In): 0.63 In
Fitment notes — GM GENUINE 11546667
Thread Diameter (In): 0.63 In
Engine BlockM16X1.5X16.25
View on
Amazon
MELLING Fits: 6.2L V8 MOGP200
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MELLING Fits: 6.2L V8 MOGP200HP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceDouble O-Ring Design
Fitment notes — MELLING MOGP200HP
High PerformanceDouble O-Ring DesignBlack anodized billet 6061-T6 aluminum
Escalade Base Model3.04 inches Long
View on
Amazon

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Oil Level Sensor

Brand Part Number Markets Notes Buy
WELLS Fits: 6.2L V8 5S15947
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Oil Level Sensor Gasket / O-Ring

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12638820
🇺🇸 US 🇨🇦 CA
Material: Rubber
Fitment notes — GM GENUINE 12638820
Material: Rubber
SINGLE USE
View on
Amazon

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Oil Nozzle

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12678499
🇺🇸 US 🇨🇦 CA
Injector Spray NozzlePiston Nozzle
View on
Amazon

This table covers the Oil nozzles.

Oil Pan

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12739177
🇺🇸 US 🇨🇦 CA
Engine Oil Cooler Return Fitting: No
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Pan Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12554990
🇺🇸 US 🇨🇦 CA
M6X1.0X136
View on
Amazon
GM GENUINE Fits: 6.2L V8 11588725
🇺🇸 US 🇨🇦 CA
M8X1.25X35
View on
Amazon

This table covers the Oil Pan bolts.

Oil Pan Cover

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12630766
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Oil Pan covers.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ Popular Fits: 6.2L V8 703141410
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RTV Silicone
View on
Amazon
AJUSA Fits: 6.2L V8 14115000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 12666993
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
GM GENUINE Fits: 6.2L V8 12623359
🇺🇸 US 🇨🇦 CA
Single UseOil Pan Cover Gasket
View on
Amazon
GM GENUINE Fits: 6.2L V8 12621086
🇺🇸 US 🇨🇦 CA
Exc. Vehicle Requires 2022 Model Year Parts(AMK)
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12744612
🇺🇸 US 🇨🇦 CA
View on
Amazon
MELLING Fits: 6.2L V8 M595
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Oil Pump Bolt

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11610074
🇺🇸 US 🇨🇦 CA
M8X1.25X45
View on
Amazon

This table covers the Oil Pump bolts.

Oil Pump Control Valve / Solenoid

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12686431
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8 OPS405
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Oil Pump Control Valve / Solenoid Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12626252
🇺🇸 US 🇨🇦 CA
Color: Orange
View on
Amazon

This table covers the seals at the Oil Pump Control Valve / Solenoid. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Pump Gasket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12638433
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Sump Windage Tray

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12619978
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the windage trays that keep crank windage out of the oil sump.

Piston

Premium

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 P40338
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Coated SkirtHypereutectic
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12656875
🇺🇸 US 🇨🇦 CA
LeftStandard
View on
Amazon
GM GENUINE Fits: 6.2L V8 12656874
🇺🇸 US 🇨🇦 CA
RightStandard
View on
Amazon
GM GENUINE Fits: 6.2L V8 12658743
🇺🇸 US 🇨🇦 CA
LeftLH Piston Assembly
Fitment notes — GM GENUINE 12658743
LeftLH Piston Assembly.5mm O/S
View on
Amazon
GM GENUINE Fits: 6.2L V8 12658744
🇺🇸 US 🇨🇦 CA
RightRH Piston Assembly
Fitment notes — GM GENUINE 12658744
RightRH Piston Assembly.5mm O/S
View on
Amazon

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.

Piston Pin Retainer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12569638
🇺🇸 US 🇨🇦 CA
Used with Federal Mogul Pistons
View on
Amazon

This table covers the Piston Pin retainers.

Piston Ring

Premium

Brand Part Number Markets Notes Buy
SEALED POWER Popular Fits: 6.2L V8 E1034K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PremiumSet
Fitment notes — SEALED POWER E1034K
PremiumSetRing Groove Widths: 1.2mm, 1.5mm, 2.5mm
Escalade Base ModelDuctile IronStainless Steel
View on
Amazon
ENGINETECH Fits: 6.2L V8 M10328
🇺🇸 US
Set
Fitment notes — ENGINETECH M10328
Set
1.2mm / 1.5mm / 2.5mm
View on
Amazon
HASTINGS MANUFACTURING Fits: 6.2L V8 2M5381
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Full SetPlasma Moly Top Ring
Fitment notes — HASTINGS MANUFACTURING 2M5381
Full SetPlasma Moly Top Ringfor 2 Ring PistonTop Groove: 1.202nd Groove: 1.501ST Oil Groove: 2.50
Fits:
Escalade ESVEngine. Bore (In.): 4.065Engine. Bore (Metric): 103.25
or:
Escalade Base ModelLuxury or Sport Platinum
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 42217CP
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
PremiumMaterial Carbon Steel / Cast Iron / Stainless Steel
Fitment notes — MAHLE / CLEVITE 42217CP
PremiumMaterial Carbon Steel / Cast Iron / Stainless SteelSetAxial Height: 1.2mm / 1.5mm / 2.5mmFacing: Plasma-Moly / Chrome
Shallow Groove
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12685185
🇺🇸 US 🇨🇦 CA
SetContains Upper/Lower Compression Ring, Oil Rings, Oil Expander
Fitment notes — GM GENUINE 12685185
SetContains Upper/Lower Compression Ring, Oil Rings, Oil Expander
Standard
View on
Amazon
GM GENUINE Fits: 6.2L V8 12687779
🇺🇸 US 🇨🇦 CA
Contains Upper/Lower Compression Rings, Oil Expander, Oil Rails
Fitment notes — GM GENUINE 12687779
Contains Upper/Lower Compression Rings, Oil Expander, Oil Rails
.5MM O/S
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Push Rod

Brand Part Number Markets Notes Buy
ENGINETECH Fits: 6.2L V8 EPR325
🇺🇸 US
Intake and Exhaust
View on
Amazon
GM GENUINE Fits: 6.2L V8 12619828
🇺🇸 US 🇨🇦 CA
Material: Steel
View on
Amazon
MELLING Fits: 6.2L V8 MPR696
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SBI Fits: 6.2L V8 1901555
🇺🇸 US 🇨🇦 CA
Intake and Exhaust7.850 Length
Fitment notes — SBI 1901555
Intake and Exhaust7.850 Length344X075 Diameter/Wall
View on
Amazon

This table covers the pushrods that transfer lifter motion to the rocker arms.

Rocker Arm

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12619829
🇺🇸 US 🇨🇦 CA
View on
Amazon
ENGINETECH Fits: 6.2L V8 ER913
🇺🇸 US
View on
Amazon
MELLING Fits: 6.2L V8 MR913
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
QUALCAST Fits: 6.2L V8 402913
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SBI Fits: 6.2L V8 1801343
🇺🇸 US 🇨🇦 CA
Intake and ExhaustRoller Pivot Assy.
Fitment notes — SBI 1801343
Intake and ExhaustRoller Pivot Assy.Note: with BoltCaptive Bearing Design with High Grade Steel Trunion
View on
Amazon

This table covers the rocker arms that transfer cam motion to the valves.

Rocker Arm Nut

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11546449
🇺🇸 US 🇨🇦 CA
Black
Fitment notes — GM GENUINE 11546449
Black
M6X1
View on
Amazon

This table covers the Rocker Arm nuts.

Timing Chain

Brand Part Number Markets Notes Buy
CLOYES Fits: 6.2L V8 94205
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 12646387
🇺🇸 US 🇨🇦 CA
View on
Amazon
MELLING Fits: 6.2L V8 3SRH60
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 C1360
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Economy

Brand Part Number Markets Notes Buy
GATES Fits: 6.2L V8 CHK163
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes Timing Chain, Guide, Sprocket
View on
Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 TS10361
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Balance Shaft Drive Components Not IncludedDoes Not Include Variable Valve Timing (VVT) Sprocket
View on
Amazon

High Performance

Brand Part Number Markets Notes Buy
CLOYES Fits: 6.2L V8 93678X5Z
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
without Camshaft Gearwith "Z" Racing Chain
View on
Amazon
CLOYES Fits: 6.2L V8 93679X5Z
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Timing Set
Fitment notes — CLOYES 93679X5Z
Timing Set
with Camshaft Sprocketwith "Z" Racing Chain
View on
Amazon
MELLING Fits: 6.2L V8 485755
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceDoes Not Include Cam Sprocket
Fitment notes — MELLING 485755
High PerformanceDoes Not Include Cam Sprocket
Tensioner Elimination Kit.250 Inch Single Roller - Rolon ChainBillet Steel Crankshaft Sprocket5 Keyway with 2 and 4 Degree AdjustmentCan be Used with VVT (Variable Valve Timing) Camshaft Sprocket
View on
Amazon
MELLING Fits: 6.2L V8 485755G
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceDoes Not Include Cam Sprocket
Fitment notes — MELLING 485755G
High PerformanceDoes Not Include Cam Sprocket
.250 Inch Single Roller - Iwis ChainBillet Steel Crankshaft Sprocket5 Keyway with 2 and 4 Degree AdjustmentChain Tensioner Elimination Kit, Eliminates The Factory Chain Tensioner For A Tighter Chain SetupCan be Used with VVT (Variable Valve Timing) Camshaft Sprocket
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
CLOYES Popular Fits: 6.2L V8 94205SCX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include SprocketsIncludes: Chain Guide, Chain Tensioner, Chain Tensioner Guide, Timing Chain
View on
Amazon
MELLING Popular Fits: 6.2L V8 33SRH60SX
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include Sprockets
View on
Amazon
MELLING Popular Fits: 6.2L V8 33SRH60SE
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Balance Shaft Drive Components Not Included
View on
Amazon
CLOYES Fits: 6.2L V8 94205SC
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket
Fitment notes — CLOYES 94205SC
Includes: Timing Chain, Timing Chain Tensioner, Crankshaft Sprocket
with Crankshaft Chain Sprocket
View on
Amazon
CLOYES Fits: 6.2L V8 93678X5
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Timing Set
Fitment notes — CLOYES 93678X5
Timing Set
without Camshaft GearPremium
View on
Amazon
CLOYES Fits: 6.2L V8 93679X5
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Timing Set
Fitment notes — CLOYES 93679X5
Timing Set
High Performance True Roller Chainwith Camshaft Sprocket
View on
Amazon
ENGINETECH Fits: 6.2L V8 TS0361
🇺🇸 US
Includes crank sprocket, chain and tensioner/guide assembly
View on
Amazon
INA Fits: 6.2L V8 ZC76291
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Does Not Include Cam SprocketKit Contains 1 Chain, 1 Crankshaft Sprocket, 1 Tensioner
Fitment notes — INA ZC76291
Does Not Include Cam SprocketKit Contains 1 Chain, 1 Crankshaft Sprocket, 1 Tensioner
Escalade Base Model
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Tensioner

Brand Part Number Markets Notes Buy
CLOYES Popular Fits: 6.2L V8 95977
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12630107
🇺🇸 US 🇨🇦 CA
CAM DRIVE
View on
Amazon
ENGINETECH Fits: 6.2L V8 TT5174
🇺🇸 US
View on
Amazon
GM GENUINE Fits: 6.2L V8 11515758
🇺🇸 US 🇨🇦 CA
M8X1.25X30Tensioner Bolt Only
View on
Amazon
MELLING Fits: 6.2L V8 BT5174
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 T66273
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Cover

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12691692
🇺🇸 US 🇨🇦 CA
FrontMUST Use with DOWEL PIN 22531637 QTY 2
View on
Amazon
SKP Fits: 6.2L V8 SK12691692
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the Timing covers.

Timing Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO Fits: 6.2L V8 TCS462211T
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Permadryplus with Speedfit
Fitment notes — FEL-PRO TCS462211T
Permadryplus with Speedfit
Escalade Base ModelThis gasket does Not require a 12-24 hour cure time. Replacement For OEM RTV
View on
Amazon

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Timing Cover Seal

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE Fits: 6.2L V8 68019
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Front
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Timing Crank Sprocket

Brand Part Number Markets Notes Buy
CLOYES Fits: 6.2L V8 S1111
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
GM GENUINE Fits: 6.2L V8 12713934
🇺🇸 US 🇨🇦 CA
Keyway Adjustable: YESTooth Quantity: 22
View on
Amazon
MELLING Fits: 6.2L V8 S1355
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
PREFERRED COMPONENTS INC Fits: 6.2L V8 G56067
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Valley Pan Cover

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12711621
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Valley Pan covers.

Valve Cover

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12723317
🇺🇸 US 🇨🇦 CA
Mounting Hardware Included: YES
Fitment notes — GM GENUINE 12723317
Mounting Hardware Included: YES
LeftVehicle Requires 2022 Model Year Parts (AMK)
View on
Amazon
GM GENUINE Fits: 6.2L V8 12727455
🇺🇸 US 🇨🇦 CA
Mounting Hardware Included: YES
Fitment notes — GM GENUINE 12727455
Mounting Hardware Included: YES
Right
View on
Amazon

This table covers the Valve covers.

Valve Cover Bolt / Screw

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 11547061
🇺🇸 US 🇨🇦 CA
Bolt Type: Hex Flanged
Fitment notes — GM GENUINE 11547061
Bolt Type: Hex Flanged
M6X1X30
View on
Amazon

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12619787
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon
AJUSA Fits: 6.2L V8 11162000
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
APEX Fits: 6.2L V8 AVC1351
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
FEL-PRO Fits: 6.2L V8 VS50907R
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Permadry RubberValve Cover Grommets Not Included
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 VS50731
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMolded Rubber
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Economy

Brand Part Number Markets Notes Buy
SKP Fits: 6.2L V8 SK12740071
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Dynamic Fuel Management (DFM) Engines
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
ENGINETECH Popular Fits: 6.2L V8 L2303
🇺🇸 US
HydraulicRoller Follower
Fitment notes — ENGINETECH L2303
HydraulicRoller Follower
Deactivating type
View on
Amazon
MELLING Popular Fits: 6.2L V8 JB8011
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic
Fitment notes — MELLING JB8011
Hydraulic
Dynamic Fuel Management (DFM) Engines
View on
Amazon
ENGINETECH Fits: 6.2L V8 L2303K
🇺🇸 US
HydraulicRoller Follower
View on
Amazon
MELLING Fits: 6.2L V8 JBK8300
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Kit
Fitment notes — MELLING JBK8300
Kit
Dynamic Fuel Management (DFM) Engines
View on
Amazon
QUALCAST Fits: 6.2L V8 362148
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic Roller
View on
Amazon
QUALCAST Fits: 6.2L V8 362303
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Hydraulic Roller
Fitment notes — QUALCAST 362303
Hydraulic Roller
3.785 OAL AFM "DE-AC". GM # 12639516
View on
Amazon
SBI Fits: 6.2L V8 VL558
🇺🇸 US 🇨🇦 CA
Active Fuel Mgmt. Hydraulic Roller Type
Fitment notes — SBI VL558
Active Fuel Mgmt. Hydraulic Roller Type
Intake and Exhaust0.842 Body Diameter3.760 Lengthwith SpringDynamic Fuel ManagementNote: Replaces Previous AFM Lifterit is Recommended To Replace In Sets.
View on
Amazon
SEALED POWER Fits: 6.2L V8 HT2320
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Do Not Use this Lifter In Dynamic Fuel Management (DFM) EnginesActive Fuel Management Engine
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Lifter Guide

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12664915
🇺🇸 US 🇨🇦 CA
Material: Plastic
View on
Amazon
GM GENUINE Fits: 6.2L V8 12709452
🇺🇸 US 🇨🇦 CA
Material: Steel
View on
Amazon
MELLING Fits: 6.2L V8 MLG107
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
SEALED POWER Fits: 6.2L V8 HT2323K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
RearActive Fuel Management Engine
View on
Amazon
SEALED POWER Fits: 6.2L V8 HT2322K
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
FrontActive Fuel Management Engine
View on
Amazon

This table covers the guides that keep each lifter aligned.

Valve Spring

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12728729
🇺🇸 US 🇨🇦 CA
Spring Type: Single Spring
View on
Amazon
MELLING Popular Fits: 6.2L V8 VS2488
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
MELLING Fits: 6.2L V8 VTSS100
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High Performance
Fitment notes — MELLING VTSS100
High Performance
Setup Spring
View on
Amazon
MELLING Fits: 6.2L V8 VSK461208LT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel Retainers
Fitment notes — MELLING VSK461208LT
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel RetainersStandard Finish Valve Spring
Installed Pressure 160 PSIOpen Pressure 482 PSI
View on
Amazon
MELLING Fits: 6.2L V8 VSK461208TLT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Titanium Retainers
Fitment notes — MELLING VSK461208TLT
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Titanium RetainersStandard Finish Valve Spring
Installed Pressure 160 PSIOpen Pressure 482 PSI
View on
Amazon
MELLING Fits: 6.2L V8 VSK46656LT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel Retainers
Fitment notes — MELLING VSK46656LT
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel RetainersStandard Finish Valve Spring
Installed Pressure 147 PSIOpen Pressure 406 PSI
View on
Amazon
MELLING Fits: 6.2L V8 VSK46656TLT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Titanium Retainers
Fitment notes — MELLING VSK46656TLT
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Titanium RetainersStandard Finish Valve Spring
Installed Pressure 147 PSIOpen Pressure 406 PSI
View on
Amazon
MELLING Fits: 6.2L V8 VSK46659LT
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel Retainers
Fitment notes — MELLING VSK46659LT
High PerformanceIncludes Valve Locks, Spring Retainers, Valve Spring Shims, Valve Stem Seals, Stainless Steel RetainersStandard Finish Valve Spring
Installed Pressure 151 PSIOpen Pressure 417 PSI
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 10166344
🇺🇸 US 🇨🇦 CA
EXH
View on
Amazon
MELLING Fits: 6.2L V8 VSR709
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the Valve Spring retainers.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 6.2L V8 VL760
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon
ENGINETECH Fits: 6.2L V8 EPC291
🇺🇸 US
Intake and ExhaustSingle Round Groove
View on
Amazon
GM GENUINE Fits: 6.2L V8 10166345
🇺🇸 US 🇨🇦 CA
Material: Alloy Steel
View on
Amazon
QUALCAST Fits: 6.2L V8 345005
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
0.314 Stem. Round Bead In Middle.
View on
Amazon
SBI Fits: 6.2L V8 1211085
🇺🇸 US 🇨🇦 CA
Intake and Exhaust0.2900 Length
Fitment notes — SBI 1211085
Intake and Exhaust0.2900 Length1 Round bead type0.3100 I.D.
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Valve Stem Seal

Brand Part Number Markets Notes Buy
FEL-PRO Popular Fits: 6.2L V8 SS71039
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Set
Fitment notes — FEL-PRO SS71039
Set
Intake and Exhaust
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12689007
🇺🇸 US 🇨🇦 CA
IntakeSingle Use
View on
Amazon
GM GENUINE Fits: 6.2L V8 12689006
🇺🇸 US 🇨🇦 CA
ExhaustExcept Vehicle Requires 2022 Model Year Parts (AMK)
View on
Amazon
MAHLE / CLEVITE Fits: 6.2L V8 SS46078
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetMetal with Molded Rubber
Fitment notes — MAHLE / CLEVITE SS46078
SetMetal with Molded RubberIncludes 16 Pieces
Intake and ExhaustPositive Type
View on
Amazon
SBI Fits: 6.2L V8 1221337
🇺🇸 US 🇨🇦 CA
IntakeViton Material
Fitment notes — SBI 1221337
IntakeViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter
View on
Amazon
SBI Fits: 6.2L V8 1221338
🇺🇸 US 🇨🇦 CA
ExhaustViton Material
Fitment notes — SBI 1221338
ExhaustViton MaterialPositive TypeTop Hat Style5/16 Nominal Stem Diameter
View on
Amazon
ULTRA-POWER Fits: 6.2L V8 SS71039
🇺🇸 US 🇨🇦 CA
SetPremium Valve Stem Seals Included
Fitment notes — ULTRA-POWER SS71039
SetPremium Valve Stem Seals Included16 Pieces
EXHAUSTINTAKE
View on
Amazon
VICTOR REINZ Fits: 6.2L V8 121003401
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
SetContains 16 Pieces
Fitment notes — VICTOR REINZ 121003401
SetContains 16 PiecesImproved Design
Intake and Exhaust
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand Part Number Markets Notes Buy
WALKER PRODUCTS Fits: 6.2L V8 5901399
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
GM GENUINE Popular Fits: 6.2L V8 12675031
🇺🇸 US 🇨🇦 CA
Adjuster Magnet
View on
Amazon
GM GENUINE Popular Fits: 6.2L V8 12746597
🇺🇸 US 🇨🇦 CA
SINGLE USE
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8 VVT464
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Adjuster Magnet
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8 VVT761
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Control
View on
Amazon
Brand Part Number Markets Notes Buy
VAICO Fits: 6.2L V8 V510682
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
Oil Control
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Variable Valve Timing (VVT) Solenoid Gasket / Seal

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12623437
🇺🇸 US 🇨🇦 CA
Single UseAdjuster Magnet
View on
Amazon

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Sprocket

Brand Part Number Markets Notes Buy
GM GENUINE Fits: 6.2L V8 12689342
🇺🇸 US 🇨🇦 CA
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 6.2L V8 VVT762
🇺🇸 US 🇨🇦 CA 🇲🇽 MX
View on
Amazon

This table covers the cam phaser sprockets used by the variable-valve-timing system.

Buying Engine Parts for a 2021 Cadillac Escalade

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Timing Chain & Component Kit and Motor Mount .

Frequently Asked Questions

How many engine parts fit the 2021 Cadillac Escalade?

Our catalog currently lists 294 engine parts for the 2021 Cadillac Escalade across 97 subcategories and 42 brands, covering both the 3.0L L6 DIESEL Turbocharged and the 6.2L V8. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Cadillac Escalade engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Cadillac Escalade?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2021 Cadillac Escalade?

Oil rows on this page include SAE 0W-20 and SAE 0W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Cadillac Escalade was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Cadillac Escalade?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Cadillac Escalade

Engine Parts for Other Cadillac Escalade Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.