14 Automatic transmission parts are listed for the 2004 Chrysler Cirrus, in 5 part types, covering both the 2.4L L4 Turbocharged and the 2.7L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2004 Chrysler Cirrus, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts. 12 parts of the 14 listed are Transmission Fluid Additive (8 parts), Fluid Pump Seal (2 parts) and Output Shaft Seal (2 parts). The other 2 part types cover the remaining 2 parts.
The 2004 Chrysler Cirrus was sold with both the 2.4L L4 Turbocharged and the 2.7L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
5 brands supply automatic transmission parts for the 2004 Chrysler Cirrus, led by LUBEGARD (8 parts), ELRING (3 parts) and SKF (1 part), plus 2 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2004 Chrysler Cirrus. 2 parts have it, including LUBEGARD 19610 (Transmission Fluid Additive) and LUBEGARD 60902 (Transmission Fluid Additive). Each part number opens a page with every vehicle that part fits.
Fluid Pump O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.4L L4 Turbocharged | B19080 | 🇲🇽 MX | Body code: J2 | View on Amazon |
This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2004 Chrysler Cirrus — ELRING B19080.
Fluid Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.4L L4 Turbocharged | B19070 | 🇲🇽 MX | Body code: J2 | View on Amazon |
| SKF Fits: 2.4L L4 Turbocharged | 14939 | 🇲🇽 MX | Front | View on Amazon |
This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Fluid Pump Seal parts for the 2004 Chrysler Cirrus come from 2 brands — ELRING and SKF.
Listed part numbers: ELRING B19070 and SKF 14939.
O-Rings & Seals
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.4L L4 Turbocharged | B19050 | 🇲🇽 MX | Body code: J2 | View on Amazon |
This table covers the O-rings and seals at this joint.
This group shows a single part: ELRING B19050.
Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.4L L4 Turbocharged | 3459 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| SCHAEFFLER Fits: 2.4L L4 Turbocharged | SS2627 | 🇲🇽 MX | Type of construction: FmsaMetal, Spring, Auxiliary Lip | View on Amazon |
This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Output Shaft Seal parts are listed for the 2004 Chrysler Cirrus, from ACDELCO and SCHAEFFLER.
Listed part numbers: ACDELCO 3459 and SCHAEFFLER SS2627.
Transmission Fluid Additive
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Popular Fits: 2.4L L4 Turbocharged | 19610 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD Popular Fits: 2.4L L4 Turbocharged | 60902 | 🇲🇽 MX | Automatic Transmission Fluid Protectant10 oz | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 19689 | 🇲🇽 MX | Instant Shudder Fixx2 oz | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 19680 | 🇲🇽 MX | Instant Shudder Fixx2 oz, clam shell | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 19688 | 🇲🇽 MX | Instant Shudder Fixx2 oz, Spanish | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 50902 | 🇲🇽 MX | Automatic Transmission Fluid Protectant32 oz | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 50904 | 🇲🇽 MX | Automatic Transmission Fluid Protectant5 Gallon | View on Amazon |
| LUBEGARD Fits: 2.4L L4 Turbocharged | 50905 | 🇲🇽 MX | Automatic Transmission Fluid Protectant55 Gallon | View on Amazon |
This table covers the conditioners and additives used with this transmission fluid.
LUBEGARD supplies the 8 Transmission Fluid Additive parts for the 2004 Chrysler Cirrus. LUBEGARD 19610 carries the "Popular" badge.
Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, plus the other parts above.
Buying Automatic Transmission Parts for a 2004 Chrysler Cirrus
On this vehicle, the automatic transmission covers the automatic gearbox and its supporting cast — filters, coolers, solenoids, mounts and torque-converter parts.
- Match the engine first. Every automatic transmission part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Transmission Fluid Additive and Fluid Pump Seal .
Frequently Asked Questions
How many automatic transmission parts fit the 2004 Chrysler Cirrus?
Our catalog currently lists 14 automatic transmission parts for the 2004 Chrysler Cirrus across 5 subcategories and 5 brands, covering both the 2.4L L4 Turbocharged and the 2.7L V6. Each part is matched to the engine(s) it fits.
Do automatic transmission parts differ between 2004 Chrysler Cirrus engines?
Yes. Every automatic transmission part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of automatic transmission problems on a 2004 Chrysler Cirrus?
Common symptoms include delayed or harsh engagement, slipping under load, fluid that smells burnt, or shuddering at light throttle around 40 mph. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the filter and pan gasket with every fluid service, and flush the cooler lines when replacing a failed unit.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2004 Chrysler Cirrus was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2004 Chrysler Cirrus?
First match the engine — each row shows which engine(s) the part fits. Then use exactly the fluid specification in the notes — automatic transmissions are the least forgiving component on the vehicle about fluid choice. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2004 Chrysler Cirrus
Automatic Transmission Parts for Other Chrysler Cirrus Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.