2007 Chrysler Pacifica Drivetrain Parts

This table covers the Axle shafts. Read more

USA STANDARD GEAR supplies both parts for the 2007 Chrysler Pacifica. All of them fit every engine offered in the 2007 Pacifica.

Listed part numbers: USA STANDARD GEAR ZAK630155 and USA STANDARD GEAR ZAK630156.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

30 CV Axle parts for the 2007 Chrysler Pacifica come from 8 brands — TRAKMOTIVE, GSP, FAMOUS BRAND and 5 other brands. The "Popular" part is HERI 72240. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 19 parts from TRAKMOTIVE, GSP, APWI and 1 other brand.

This table covers the CV Intermediate shafts. Read more

7 CV Intermediate Shaft parts are listed for the 2007 Chrysler Pacifica, from DORMAN, GSP, TOP NOTCH and 1 other brand. GSP NEX12007 carries the "Popular" badge.

In the Economy grade, DORMAN supplies 2 parts: the catalog's value-priced group. A representative part number is DORMAN 630155.

The Standard Replacement section lists 3 options from GSP, TOP NOTCH and TRAKMOTIVE — built to original-equipment specification. GSP NEX12007 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes GSP NEX12007, DORMAN 630155 and DORMAN 630156 and the remaining parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts for the 2007 Chrysler Pacifica come from 3 brands — MEVOTECH, MOPAR and VAICO. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: MEVOTECH DX778, MEVOTECH DX877 and MOPAR 68059351AA, plus the other parts above.

This table covers the Differential Bearing retainers. Read more

This group shows a single part: MOPAR 4659736.

This table covers the bearings and races that support the differential carrier. Read more

17 Differential Carrier Bearing / Race parts for the 2007 Chrysler Pacifica come from 6 brands — NATIONAL, TIMKEN, WJB / INMOTION PARTS and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WTA18. 16 parts fit every engine; the other 1 is engine-specific.

The Economy section: 3 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA18 is listed in this group.

Standard Replacement: 14 parts, from NATIONAL, TIMKEN, BCA and 2 other brands. A representative part number is ACDELCO A18.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Differential Cover Gasket parts for the 2007 Chrysler Pacifica come from 2 brands — FEL-PRO and MAHLE / CLEVITE. Every part fits both the 3.8L V6 and the 4.0L V6.

This group includes FEL-PRO RDS55481 and MAHLE / CLEVITE P33149.

This table covers the Differential Ring gears. Read more

One part is listed for the 2007 Chrysler Pacifica — MOPAR 5078575AA.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

4 Drive Shaft parts are listed for the 2007 Chrysler Pacifica, from DORMAN, GSP, TOP NOTCH and 1 other brand. All of them fit every engine offered in the 2007 Pacifica.

Part numbers include DORMAN 946325, GSP PS901457 and TOP NOTCH TN1292PS, among others listed above.

This table covers the flex joints in the driveshaft. Read more

5 Drive Shaft Flex Joint parts for the 2007 Chrysler Pacifica come from 5 brands — AAE, DORMAN, MOOG and 2 other brands. 4 parts fit every engine; the other 1 is engine-specific.

This group includes AAE FJC0106, DORMAN 935302 and MOOG 682 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts for the 2007 Chrysler Pacifica come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is MOBIL 104361. Every part fits both the 3.8L V6 and the 4.0L V6.

This table covers the Power Take Off (PTO) assemblies. Read more

This group shows a single part: MOPAR 5157001AG.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts for the 2007 Chrysler Pacifica come from 5 brands — VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. The "Popular" part is LUCAS OIL 10047. 12 parts fit every engine; the other 1 is engine-specific.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts are listed for the 2007 Chrysler Pacifica, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2007 Pacifica.

Part numbers include BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 2007 Chrysler Pacifica, from WJB / INMOTION PARTS, NATIONAL and SKF. 2 parts fit every engine; the other 2 are engine-specific.

This group includes NATIONAL 711118, SKF 17050A and WJB / INMOTION PARTS WS711118 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

5 Transfer Case Output Shaft Repair Sleeve parts for the 2007 Chrysler Pacifica come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 99157. Every part fits both the 3.8L V6 and the 4.0L V6.

Part numbers include NATIONAL 99157, BCA NS99215 and NATIONAL 99215, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts for the 2007 Chrysler Pacifica come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.8L V6 and the 4.0L V6.

This group includes NATIONAL 711116, NATIONAL 711117 and WJB / INMOTION PARTS WS711116 and the remaining parts above.

This table covers the viscous couplers in the AWD driveline. Read more

One part is listed for the 2007 Chrysler Pacifica — MOPAR 4809868AE.