2008 Chrysler Pacifica Drivetrain Parts

This table covers the Axle shafts. Read more

2 Axle Shaft parts for the 2008 Chrysler Pacifica come from USA STANDARD GEAR. Every part fits both the 3.8L V6 and the 4.0L V6.

This group includes USA STANDARD GEAR ZAK630155 and USA STANDARD GEAR ZAK630156.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

30 CV Axle parts are listed for the 2008 Chrysler Pacifica, from TRAKMOTIVE, GSP, FAMOUS BRAND and 5 other brands. HERI 72240 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 19 parts from TRAKMOTIVE, GSP, APWI and 1 other brand.

This table covers the CV Intermediate shafts. Read more

7 CV Intermediate Shaft parts for the 2008 Chrysler Pacifica come from 4 brands — DORMAN, GSP, TOP NOTCH and 1 other brand. The "Popular" part is GSP NEX12007.

The Economy section lists 2 options from DORMAN — the catalog's value-priced group. DORMAN 630155 is listed in this group.

In the Standard Replacement grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: built to original-equipment specification. A representative part number is GSP NEX12007.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: GSP NEX12007, DORMAN 630155 and DORMAN 630156, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

5 CV Joint Boot parts are listed for the 2008 Chrysler Pacifica, from MEVOTECH, MOPAR and VAICO. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include MEVOTECH DX778, MEVOTECH DX877 and MOPAR 68050953AA, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

17 Differential Carrier Bearing / Race parts are listed for the 2008 Chrysler Pacifica, from NATIONAL, TIMKEN, WJB / INMOTION PARTS and 3 other brands. WJB / INMOTION PARTS WTA18 carries the "Popular" badge. 16 parts fit every engine; the other 1 is engine-specific.

Economy: 3 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA18.

The Standard Replacement section: 14 options from NATIONAL, TIMKEN, BCA and 2 other brands. ACDELCO A18 is listed in this group.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Differential Cover Gasket parts are listed for the 2008 Chrysler Pacifica, from FEL-PRO and MAHLE / CLEVITE. All of them fit every engine offered in the 2008 Pacifica.

Listed part numbers: FEL-PRO RDS55481 and MAHLE / CLEVITE P33149.

This table covers the Differential Ring gears. Read more

This group shows a single part: MOPAR 5078575AA.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

5 Drive Shaft parts for the 2008 Chrysler Pacifica come from 5 brands — DORMAN, GSP, MOPAR and 2 other brands. Every part fits both the 3.8L V6 and the 4.0L V6.

Part numbers include DORMAN 946325, GSP PS901457 and MOPAR 5157008AE, among others listed above.

This table covers the flex joints in the driveshaft. Read more

5 Drive Shaft Flex Joint parts are listed for the 2008 Chrysler Pacifica, from AAE, DORMAN, MOOG and 2 other brands. 4 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: AAE FJC0106, DORMAN 935302 and MOOG 682, plus the other parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts are listed for the 2008 Chrysler Pacifica, from VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. MOBIL 104361 carries the "Popular" badge. All of them fit every engine offered in the 2008 Pacifica.

This table covers the Power Take Off (PTO) assemblies. Read more

One part is listed for the 2008 Chrysler Pacifica — MOPAR 5157001AG.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

13 Transfer Case Fluid parts are listed for the 2008 Chrysler Pacifica, from VALVOLINE, LUCAS OIL, MOBIL and 2 other brands. MOBIL 104361 carries the "Popular" badge.

This table covers the wear sleeves used to restore a Transfer Case Input Shaft seal surface. Read more

3 Transfer Case Input Shaft Repair Sleeve parts for the 2008 Chrysler Pacifica come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99177, NATIONAL 99177 and WJB / INMOTION PARTS WS99177.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts for the 2008 Chrysler Pacifica come from 3 brands — WJB / INMOTION PARTS, NATIONAL and SKF.

This group includes NATIONAL 711118, SKF 17050A and WJB / INMOTION PARTS WS711118 and the remaining parts above.

This table covers the wear sleeves used to restore a Transfer Case Output Shaft seal surface. Read more

5 Transfer Case Output Shaft Repair Sleeve parts are listed for the 2008 Chrysler Pacifica, from NATIONAL, WJB / INMOTION PARTS and BCA. NATIONAL 99157 carries the "Popular" badge.

Part numbers include NATIONAL 99157, BCA NS99215 and NATIONAL 99215, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts are listed for the 2008 Chrysler Pacifica, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711116, NATIONAL 711117 and WJB / INMOTION PARTS WS711116 and the remaining parts above.

This table covers the viscous couplers in the AWD driveline. Read more

This group shows a single part: MOPAR 4809868AE.