2008 Chrysler Aspen Engine Parts

This table covers the Auxiliary Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2008 Chrysler Aspen — ENGINE PRO 151990.

This table covers the camshafts that open the valves. Read more

11 Camshaft parts for the 2008 Chrysler Aspen come from 4 brands — MELLING, ENGINETECH, SKP and 1 other brand. The "Popular" part is MELLING 23108.

The High Performance section lists 4 options from MELLING — engineered beyond original-equipment specification. MELLING 23108 is listed in this group.

In the Standard Replacement grade, ENGINETECH, MELLING and MOPAR supply 3 parts: built to original-equipment specification. A representative part number is ENGINETECH ES2065.

4 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

8 Camshaft Bearing parts for the 2008 Chrysler Aspen come from 4 brands — ENGINETECH, DURA-BOND, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is ENGINETECH CC484.

Part numbers include ENGINETECH CC484, ENGINETECH CC484G and DURA-BOND PDA4, among others listed above.

This table covers the Camshaft hardware kits. Read more

This group shows a single part: ENGINETECH HK121.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts for the 2008 Chrysler Aspen come from 2 brands — MELLING and MOPAR.

Part numbers include MELLING MEP334 and MOPAR 6507663AA.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2008 Chrysler Aspen — ELRING B16450.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2008 Chrysler Aspen come from ENGINETECH.

Listed part numbers: ENGINETECH ECR112 and ENGINETECH ECR112N.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

21 Connecting Rod Bearing parts for the 2008 Chrysler Aspen come from 4 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. The "Popular" part is ENGINETECH BB111J.

The High Performance section: 4 options from KING ENGINE BEARINGS and MAHLE / CLEVITE. KING ENGINE BEARINGS CR8032XPN is listed in this group.

Standard Replacement: 11 parts, from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. A representative part number is ENGINETECH BB111J.

6 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2008 Chrysler Aspen — MOPAR 6506335AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

16 Conversion / Lower Gasket Set parts for the 2008 Chrysler Aspen come from 9 brands — APEX, FEL-PRO, AJUSA and 6 other brands. The "Popular" part is APEX ACS2065.

This table covers the crankshafts that turn piston motion into rotation. Read more

3 Crankshaft parts for the 2008 Chrysler Aspen come from ENGINETECH.

Part numbers include ENGINETECH 139220, ENGINETECH 139200 and ENGINETECH 139700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Crankshaft Main Bearing parts are listed for the 2008 Chrysler Aspen, from MAHLE / CLEVITE, SEALED POWER and ENGINETECH. ENGINETECH BC115J carries the "Popular" badge.

High Performance: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE MS2220H.

The Standard Replacement section: 4 options from MAHLE / CLEVITE, ENGINETECH and SEALED POWER. ENGINETECH BC115J is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: ENGINETECH BC115J, MAHLE / CLEVITE MS2220H and MAHLE / CLEVITE MS2220HX, plus the other parts above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

This group shows a single part: VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2008 Chrysler Aspen, from SCHAEFFLER, WJB / INMOTION PARTS, FEL-PRO and 2 other brands. SCHAEFFLER SR3501 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.

This group includes SCHAEFFLER SR3501, WJB / INMOTION PARTS WS99181 and FEL-PRO 16230 and the remaining parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts are listed for the 2008 Chrysler Aspen, from FEL-PRO and VICTOR REINZ. All of them fit every engine offered in the 2008 Aspen.

This group includes FEL-PRO 16328 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

41 Crankshaft Seal parts are listed for the 2008 Chrysler Aspen, from NATIONAL, ELRING, APEX and 12 other brands. APEX ATC2751 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 907600.

This table covers the kits that disable cylinder deactivation. Read more

One part is listed for the 2008 Chrysler Aspen — MELLING MDK600.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

6 Cylinder Deactivation Solenoid parts are listed for the 2008 Chrysler Aspen, from GPD, STANDARD MOTOR PRODUCTS, CLOYES and 3 other brands. GPD 1815788 carries the "Popular" badge.

This group includes GPD 1815788, STANDARD MOTOR PRODUCTS CDS02 and CLOYES VTS231 and the remaining parts above.

This table covers the cylinder heads that close the top of the block. Read more

12 Cylinder Head parts are listed for the 2008 Chrysler Aspen, from CYLINDER HEAD EXPRESS, ENGINE PRO, ENGINETECH and 1 other brand. CYLINDER HEAD EXPRESS CI208BL carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

15 Cylinder Head Bolt parts for the 2008 Chrysler Aspen come from 8 brands — MAHLE / CLEVITE, VICTOR REINZ, FEL-PRO and 5 other brands. The "Popular" part is ENGINETECH HB228.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

32 Cylinder Head Gasket parts for the 2008 Chrysler Aspen come from 11 brands — MAHLE / CLEVITE, ELRING, ENGINETECH and 8 other brands. The "Popular" part is ENGINETECH HCR287A. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

19 Cylinder Head Gasket Set parts for the 2008 Chrysler Aspen come from 9 brands — FEL-PRO, ENGINETECH, APEX and 6 other brands. The "Popular" part is ENGINETECH CR287HSCWB.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2008 Chrysler Aspen. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include MOPAR 4556020AB and MOPAR 53021031.

This table covers the Cylinder Head Spacer shims. Read more

5 Cylinder Head Spacer Shim parts for the 2008 Chrysler Aspen come from 2 brands — SBI and ENGINETECH.

Part numbers include ENGINETECH CHS1057L, ENGINETECH CHS1057R and SBI 2302125, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

5 Engine Block Heater parts are listed for the 2008 Chrysler Aspen, from KAT'S HEATERS and MOPAR. 1 part fits every engine; the other 4 are engine-specific.

Listed part numbers: KAT'S HEATERS 11618, KAT'S HEATERS 28816 and KAT'S HEATERS 11816, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

11 Engine Kit Gasket Set parts for the 2008 Chrysler Aspen come from 6 brands — ENGINETECH, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is ENGINETECH CR345K1.