2008 Chrysler Aspen Automatic Transmission Parts

This table covers the pistons inside a transmission accumulator. Read more

4 Accumulator Piston parts are listed for the 2008 Chrysler Aspen, from SONNAX, MOPAR and TRANSGO. All of them fit every engine offered in the 2008 Aspen.

Listed part numbers: MOPAR 4446620AD, SONNAX 4489401K and SONNAX 4489401MK, plus the other parts above.

This table covers the Accumulator springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2008 Chrysler Aspen — MOPAR 4471880.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND DOT11BRTG.

This table covers the Bushing kits. Read more

This group shows a single part: DURA-BOND TK9A.

This table covers the transmission or transfer-case housings. Read more

This group shows a single part: MOPAR 5189883AC.

This table covers the vents on a transmission or axle housing. Read more

One part is listed for the 2008 Chrysler Aspen — MOPAR J5352955.

This table covers the Clutch housings. Read more

This group shows a single part: SONNAX 7296006K.

This table covers the pistons that apply a clutch pack. Read more

MOPAR supplies both parts for the 2008 Chrysler Aspen. All of them fit every engine offered in the 2008 Aspen.

Part numbers include MOPAR 4799650 and MOPAR 4799652.

This table covers the Clutch plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

MOPAR supplies the 3 Clutch Plate parts for the 2008 Chrysler Aspen. All of them fit every engine offered in the 2008 Aspen.

This group includes MOPAR 4799533, MOPAR 4799687AB and MOPAR 4799116.

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2008 Chrysler Aspen come from RAYBESTOS POWERTRAIN. Every part fits both the 4.7L V8 and the 5.7L V8.

Part numbers include RAYBESTOS POWERTRAIN RCP96105 and RAYBESTOS POWERTRAIN RGPZ105.

This table covers the related components grouped with this assembly. Read more

3 Components parts for the 2008 Chrysler Aspen come from SONNAX. Every part fits both the 4.7L V8 and the 5.7L V8.

Part numbers include SONNAX 4491202, SONNAX RFERC1 and SONNAX 4483602K.

This table covers the Conductor plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

One part is listed for the 2008 Chrysler Aspen — ROSTRA 550015.

This table covers the Dipstick / Fluid Filler tubes. Read more

This group shows a single part: MOPAR 53032601AC.

This table covers the seals at the Dipstick / Fluid Filler Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2008 Chrysler Aspen — PIONEER 760034.

This table covers the Extension Housing bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Extension Housing Bearing parts for the 2008 Chrysler Aspen come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 4.7L V8 and the 5.7L V8.

Listed part numbers: BCA NB110, NATIONAL 110 and WJB / INMOTION PARTS RB6010.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DURA-BOND RP6189T.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Extension Housing Seal parts are listed for the 2008 Chrysler Aspen, from WJB / INMOTION PARTS, ATP, NATIONAL and 1 other brand. ATP FO199 carries the "Popular" badge. All of them fit every engine offered in the 2008 Aspen.

Listed part numbers: ATP FO199, NATIONAL 710941 and ATP TO59, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

31 Filter parts for the 2008 Chrysler Aspen come from 10 brands — ATP, VARIOUS MFR, VAICO and 7 other brands. The "Popular" part is ATP B200. They are grouped as Basic Kit (Without Transmission Fluid), Economy and Standard Replacement, with Standard Replacement the largest group at 18 parts from ATP, MOPAR, RAYBESTOS POWERTRAIN and 4 other brands.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

2 Flexplate parts are listed for the 2008 Chrysler Aspen, from ATP and PIONEER. All of them fit every engine offered in the 2008 Aspen.

This group includes ATP Z606 and PIONEER FRA551.

This table covers the Flexplate Mounting bolts. Read more

One part is listed for the 2008 Chrysler Aspen — DORMAN 14131.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

7 Fluid Cooler parts for the 2008 Chrysler Aspen come from 5 brands — SKP, DORMAN, CSF and 2 other brands. The "Popular" part is SKP SKTOC080. 4 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: SKP SKTOC080, SKP SK918283 and CSF 20006, plus the other parts above.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

6 Fluid Cooler Line / Hose parts for the 2008 Chrysler Aspen come from 3 brands — DORMAN, MOPAR and SUNSONG. The "Popular" part is DORMAN 624999. Every part fits both the 4.7L V8 and the 5.7L V8.

This group includes DORMAN 624999, DORMAN 624998 and MOPAR 55056533AB and the remaining parts above.

This table covers the harness connectors at the Fluid Cooler Line / Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2008 Chrysler Aspen — DORMAN 800723.

This table covers the pans that hold automatic-transmission fluid. Read more

7 Fluid Pan parts are listed for the 2008 Chrysler Aspen, from DORMAN, SKP, ATP and 3 other brands. DORMAN 265817 carries the "Popular" badge. All of them fit every engine offered in the 2008 Aspen.

Listed part numbers: DORMAN 265817, SKP SK265817 and ATP 103330, plus the other parts above.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2008 Chrysler Aspen — DORMAN 265002.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts for the 2008 Chrysler Aspen come from 6 brands — ATP, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ATP TG110. Every part fits both the 4.7L V8 and the 5.7L V8.

This group includes ATP TG110, FEL-PRO TOS18733 and MAHLE / CLEVITE W32771 and the remaining parts above.

This table covers the Fluid Pan magnets. Read more

MOPAR supplies both parts for the 2008 Chrysler Aspen. All of them fit every engine offered in the 2008 Aspen.

Listed part numbers: MOPAR 68207788AA and MOPAR 68207789AA.

This table covers the Fluid pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

7 Fluid Pressure Sensor parts are listed for the 2008 Chrysler Aspen, from MOPAR, WELLS, GPD and 4 other brands. MOPAR 4799758AD carries the "Popular" badge. All of them fit every engine offered in the 2008 Aspen.

Part numbers include MOPAR 4799758AD, WELLS 5S5389 and GPD 1712597, among others listed above.

This table covers the Fluid pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Fluid Pump parts for the 2008 Chrysler Aspen come from MOPAR. Every part fits both the 4.7L V8 and the 5.7L V8.

Listed part numbers: MOPAR 68009879AF, MOPAR R8009879AE and MOPAR RL009879AE.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts are listed for the 2008 Chrysler Aspen, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2008 Aspen.

This group includes BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Fluid Pump Seal parts are listed for the 2008 Chrysler Aspen, from NATIONAL, BCA, SKF and 1 other brand. NATIONAL 710557 carries the "Popular" badge. All of them fit every engine offered in the 2008 Aspen.

This group includes NATIONAL 710557, NATIONAL 341022 and BCA NS710557 and the remaining parts above.

This table covers the governors and modulators that control transmission shift pressure. Read more

2 Governor / Modulator parts for the 2008 Chrysler Aspen come from 2 brands — DORMAN and SONNAX. Every part fits both the 4.7L V8 and the 5.7L V8.

Part numbers include DORMAN 601215 and SONNAX RFELB1.

This table covers the Input shafts. Read more

This group shows a single part: MOPAR 5114582AA.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Manual Shaft Seal parts are listed for the 2008 Chrysler Aspen, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2008 Aspen.

Part numbers include NATIONAL 710753 and WJB / INMOTION PARTS WS710753.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Output Shaft Bearing parts are listed for the 2008 Chrysler Aspen, from SCHAEFFLER and SKF. All of them fit every engine offered in the 2008 Aspen.

Part numbers include SCHAEFFLER 6207N and SKF 6207VSP55.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 16567.

This table covers the rebuild kits for this assembly. Read more

15 Rebuild Kit parts are listed for the 2008 Chrysler Aspen, from PA CARGO, PIONEER, TRANSTEC and 1 other brand. PA CARGO DK4400S carries the "Popular" badge. 13 parts fit every engine; the other 2 are engine-specific.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 2 parts: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK4400S.

In the Deluxe Kit (Master Kit + Filter, Band & Common Bushings) grade, PA CARGO supplies 1 part: grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO MRK4400.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 5 options from PA CARGO, PIONEER and ATP — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. ATP TM60 is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC, PA CARGO and PIONEER supply 7 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO K44900B.

This table covers the Shift Improvement kits. Read more

4 Shift Improvement Kit parts for the 2008 Chrysler Aspen come from 2 brands — TRANSGO and SONNAX. Every part fits both the 4.7L V8 and the 5.7L V8.

In the Daily Driver grade, SONNAX and TRANSGO supply 2 parts: grouped for everyday commuting duty. A representative part number is SONNAX 22771TL12.

The High Performance section lists 2 options from TRANSGO — engineered beyond original-equipment specification. TRANSGO 45RFEHD2A is listed in this group.

Part numbers include SONNAX 22771TL12, TRANSGO SK45RFEA and TRANSGO 45RFEHD2A, among others listed above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Shift Solenoid parts are listed for the 2008 Chrysler Aspen, from DORMAN and MOPAR. All of them fit every engine offered in the 2008 Aspen.

This group includes DORMAN 609040 and MOPAR 5170877AF.

This table covers the Solenoid Switch Valve plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

TRANSGO supplies the 4 Solenoid Switch Valve Plug parts for the 2008 Chrysler Aspen. All of them fit every engine offered in the 2008 Aspen.

Part numbers include TRANSGO RFESV420NT, TRANSGO RFESV453NT and TRANSGO RFESV420WT, among others listed above.

This table covers the Sun gears. Read more

One part is listed for the 2008 Chrysler Aspen — MOPAR 4799602.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

4 Torque Converter parts for the 2008 Chrysler Aspen come from 2 brands — MOPAR and TC REMANUFACTURING. 1 part fits every engine; the other 3 are engine-specific.

This group includes MOPAR R4736352AC, MOPAR RL051242AA and TC REMANUFACTURING R36 and the remaining parts above.

This table covers the Torque Converter bolts. Read more

One part is listed for the 2008 Chrysler Aspen — ARP 1477301.

This table covers the Torque Converter Clutch valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2008 Chrysler Aspen — TRANSGO RFETCCREGOS.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts are listed for the 2008 Chrysler Aspen, from MOPAR and SCHAEFFLER. All of them fit every engine offered in the 2008 Aspen.

This group includes MOPAR 4736547 and SCHAEFFLER SS2928.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

18 Transmission Fluid parts for the 2008 Chrysler Aspen come from 7 brands — PENTOSIN, LUCAS OIL, VALVOLINE and 4 other brands. The "Popular" part is VALVOLINE 822348. Every part fits both the 4.7L V8 and the 5.7L V8.

The ATF +4 section lists 5 options from VALVOLINE and PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. VALVOLINE 822348 is listed in this group.

The Dexron section lists 1 option from ACDELCO — grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. ACDELCO 109243 is listed in this group.

The Multi-Vehicle section lists 6 options from LIQUI MOLY, LUCAS OIL and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. MOBIL 126505 is listed in this group.

The ZF Fluid section lists 4 options from PENTOSIN and ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts for the 2008 Chrysler Aspen come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610. Every part fits both the 4.7L V8 and the 5.7L V8.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, plus the other parts above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Transmission Mount parts are listed for the 2008 Chrysler Aspen, from SKP, ULTRA-POWER, ANCHOR and 3 other brands. ANCHOR 3066 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

In the Economy grade, SKP and ULTRA-POWER supply 2 parts: the catalog's value-priced group. A representative part number is SKP SKM3066.

The Standard Replacement section lists 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand — built to original-equipment specification. ANCHOR 3066 is listed in this group.

Listed part numbers: ANCHOR 3066 and SKP SKM3066, plus the other parts above.

This table covers the Transmission service kits. Read more

VAICO supplies both parts for the 2008 Chrysler Aspen. All of them fit every engine offered in the 2008 Aspen.

The Expert Kit (Basic Kit & Transmission Fluid) section lists 1 option from VAICO — grouped under the catalog's "Expert Kit (Basic Kit & Transmission Fluid)" designation — the notes column spells out what sets them apart. VAICO V330525 is listed in this group.

In the Expert Kit + (Expert Kit and Extra Oil for Rinsing) grade, VAICO supplies 1 part: grouped under the catalog's "Expert Kit + (Expert Kit and Extra Oil for Rinsing)" designation — the notes column spells out what sets them apart. A representative part number is VAICO V330525XXL.

Listed part numbers: VAICO V330525 and VAICO V330525XXL.

This table covers the valve bodies that route hydraulic pressure inside the transmission. Read more

2 Valve Body parts for the 2008 Chrysler Aspen come from SONNAX. Every part fits both the 4.7L V8 and the 5.7L V8.

Part numbers include SONNAX CHR146 and SONNAX CHR140.

This table covers the gaskets that seal the Valve Body. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2008 Chrysler Aspen — TRANSTEC 49434421.