41 Drivetrain parts are listed for the 2008 Chrysler Sebring, in 6 part types, covering all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Chrysler Sebring, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Carrier Bearing / Race (21 parts), CV Axle (9 parts) and Axle Shaft Seal (4 parts). The other 3 part types cover the remaining 7 parts.
The 2008 Chrysler Sebring was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
16 brands supply drivetrain parts for the 2008 Chrysler Sebring, led by NATIONAL (7 parts), WJB / INMOTION PARTS (6 parts) and SKF (6 parts), plus 13 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2008 Chrysler Sebring. 7 parts have it, including TOP NOTCH TN30063 (CV Axle) and WJB / INMOTION PARTS WTA18 (Differential Carrier Bearing / Race). Each part number opens a page with every vehicle that part fits.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.5L V6 | 291354 | 🇺🇸 US 🇨🇦 CA | Rear LeftAWD | View on Amazon |
| MOTIVE GEAR Fits: 3.5L V6 | 9009004260 | 🇺🇸 US 🇨🇦 CA | Rear LeftAWD | View on Amazon |
| NATIONAL Fits: 3.5L V6 | 711065 | 🇺🇸 US 🇨🇦 CA | Rear LeftAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS711065 | 🇺🇸 US 🇨🇦 CA | Rear LeftAWD | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Axle Shaft Seal parts are listed for the 2008 Chrysler Sebring, from GM GENUINE, MOTIVE GEAR, NATIONAL and 1 other brand.
Listed part numbers: GM GENUINE 291354, MOTIVE GEAR 9009004260 and NATIONAL 711065, plus the other parts above.
CV Axle
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CARDONE Fits: 3.5L V6 | 603521 | 🇺🇸 US 🇨🇦 CA | Remanufactured | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TOP NOTCH Popular Fits: 3.5L V6 | TN30063 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| TOP NOTCH Popular Fits: 3.5L V6 | TN30064 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| APWI Fits: 3.5L V6 | CH8394 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| CARDONE Fits: 3.5L V6 | 663521 | 🇺🇸 US 🇨🇦 CA | Front LeftSedan | View on Amazon |
| GSP Fits: 3.5L V6 | NCV12544 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| GSP Fits: 3.5L V6 | NCV12545 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| TRAKMOTIVE Fits: 3.5L V6 | CH8116 | 🇺🇸 US 🇨🇦 CA | Does Not Include ABS Ring | View on Amazon |
| TRAKMOTIVE Fits: 3.5L V6 | CH8118 | 🇺🇸 US 🇨🇦 CA | Does Not Include ABS Ring | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
9 CV Axle parts are listed for the 2008 Chrysler Sebring, from CARDONE, TOP NOTCH, GSP and 2 other brands. TOP NOTCH TN30063 carries the "Popular" badge.
In the Economy grade, CARDONE supplies 1 part: the catalog's value-priced group. A representative part number is CARDONE 603521.
The Standard Replacement section lists 8 options from TOP NOTCH, GSP, TRAKMOTIVE and 2 other brands — built to original-equipment specification. TOP NOTCH TN30063 is listed in this group.
Listed part numbers: TOP NOTCH TN30063, CARDONE 603521 and TOP NOTCH TN30064, plus the other parts above.
CV Joint Boot
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MEVOTECH Fits: 3.5L V6 | DX554 | 🇺🇸 US 🇨🇦 CA | Front OuterSedan | View on Amazon |
| MEVOTECH Fits: 3.5L V6 | DX455 | 🇺🇸 US 🇨🇦 CA | Front InnerSedan | View on Amazon |
This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn.
MEVOTECH supplies both parts for the 2008 Chrysler Sebring.
Listed part numbers: MEVOTECH DX554 and MEVOTECH DX455.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular Fits: 3.5L V6 | WTA18 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WTJL69310 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WTJLM704610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WTJLM704649 | 🇺🇸 US 🇨🇦 CA | Left6 speed trans. | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.5L V6 | A18 | 🇺🇸 US 🇨🇦 CA | GoldIncludes JL69349 & JL69310 | View on Amazon |
| BCA Popular Fits: 3.5L V6 | NBA18 | 🇺🇸 US 🇨🇦 CA | Taper Bearing SetIncludes Cup and Cone | View on Amazon |
| NATIONAL Popular Fits: 3.5L V6 | A18 | 🇺🇸 US 🇨🇦 CA | Bearing & RaceTaper Bearing Set Includes Cup and Cone | View on Amazon |
| NATIONAL Popular Fits: 3.5L V6 | JLM704649 | 🇺🇸 US 🇨🇦 CA | Left6 speed trans. | View on Amazon |
| BCA Fits: 3.5L V6 | NBJLM704610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA Fits: 3.5L V6 | NBJLM704649 | 🇺🇸 US 🇨🇦 CA | Left6 speed trans. | View on Amazon |
| NATIONAL Fits: 3.5L V6 | JL69310 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| NATIONAL Fits: 3.5L V6 | JL69349 | 🇺🇸 US 🇨🇦 CA | Right4 speed trans. | View on Amazon |
| NATIONAL Fits: 3.5L V6 | JLM704610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| SCHAEFFLER Fits: 3.5L V6 | KLM501349 | 🇺🇸 US 🇨🇦 CA | Bearing Only | View on Amazon |
| SKF Fits: 3.5L V6 | JL69310 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SKF Fits: 3.5L V6 | JL69310VP | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| SKF Fits: 3.5L V6 | NP178207 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| SKF Fits: 3.5L V6 | NP952605 | 🇺🇸 US 🇨🇦 CA | with 1.4961 In. Bearing Inside Diameter | View on Amazon |
| SKF Fits: 3.5L V6 | LM300849VP | 🇺🇸 US 🇨🇦 CA | with 1.6140 In. Bearing Inside Diameterwith 2.6762 In. Outside Diameter Bearing(S) | View on Amazon |
| SKF Fits: 3.5L V6 | NP889967 | 🇺🇸 US 🇨🇦 CA | with 1.6142 In. Bearing Inside Diameterwith 2.8900 In. Outside Diameter Bearing(S) | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 3.5L V6 | KT318 | 🇺🇸 US 🇨🇦 CA | Automatic trans.40TE, 41TE Trans | View on Amazon |
This table covers the bearings and races that support the differential carrier.
21 Differential Carrier Bearing / Race parts are listed for the 2008 Chrysler Sebring, from SKF, NATIONAL, WJB / INMOTION PARTS and 3 other brands. WJB / INMOTION PARTS WTA18 carries the "Popular" badge.
Economy: 4 parts, from WJB / INMOTION PARTS. A representative part number is WJB / INMOTION PARTS WTA18.
The Standard Replacement section: 16 options from SKF, NATIONAL, BCA and 2 other brands. ACDELCO A18 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
Differential Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.5L V6 | RDS55481 | 🇺🇸 US 🇨🇦 CA | 4 speed trans.with 12 Bolt Holes | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | P33149 | 🇺🇸 US 🇨🇦 CA | Paper | View on Amazon |
This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Differential Cover Gasket parts are listed for the 2008 Chrysler Sebring, from FEL-PRO and MAHLE / CLEVITE.
Part numbers include FEL-PRO RDS55481 and MAHLE / CLEVITE P33149.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.5L V6 | NS99139 | 🇺🇸 US 🇨🇦 CA | Rear Outer | View on Amazon |
| NATIONAL Fits: 3.5L V6 | 99139 | 🇺🇸 US 🇨🇦 CA | Rear OuterAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS99139 | 🇺🇸 US 🇨🇦 CA | Rear OuterAWD | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
3 Differential Pinion Repair Sleeve parts are listed for the 2008 Chrysler Sebring, from BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS99139, NATIONAL 99139 and WJB / INMOTION PARTS WS99139.
Buying Drivetrain Parts for a 2008 Chrysler Sebring
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Every drivetrain part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Carrier Bearing / Race and CV Axle .
Frequently Asked Questions
How many drivetrain parts fit the 2008 Chrysler Sebring?
Our catalog currently lists 41 drivetrain parts for the 2008 Chrysler Sebring across 6 subcategories and 16 brands, covering all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6). Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2008 Chrysler Sebring engines?
Yes. Every drivetrain part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2008 Chrysler Sebring?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Chrysler Sebring was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Chrysler Sebring?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Chrysler Sebring
Drivetrain Parts for Other Chrysler Sebring Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.