2008 Chrysler Sebring Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

18 Coolant / Antifreeze parts for the 2008 Chrysler Sebring come from 6 brands — PRESTONE, VALVOLINE, PEAK and 3 other brands. The "Popular" part is FVP MV5050GAL. Every part fits all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6).

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 3 options from FVP, PEAK and PRESTONE — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, VALVOLINE, PRESTONE, ACDELCO and 2 other brands supply 8 parts: built to original-equipment specification. A representative part number is ACDELCO 105027.

This table covers the Coolant filler necks. Read more

One part is listed for the 2008 Chrysler Sebring — FOUR SEASONS 85324.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

This group shows a single part: DAYCO 87625.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Coolant Hose / Pipe Seal parts are listed for the 2008 Chrysler Sebring, from AJUSA, FEL-PRO, ULTRA-POWER and 1 other brand.

Listed part numbers: AJUSA 16060600 and FEL-PRO ES72872, plus the other parts above.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

8 Coolant Reservoir parts are listed for the 2008 Chrysler Sebring, from TECHPRO, DORMAN, GPD and 1 other brand. DORMAN 603379 carries the "Popular" badge.

This group includes DORMAN 603379, DORMAN 603586 and GPD 2411131 and the remaining parts above.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

DORMAN supplies both parts for the 2008 Chrysler Sebring. All of them fit every engine offered in the 2008 Sebring.

This group includes DORMAN 54201 and DORMAN 54203.

This table covers the Cooling Fan control modules. Read more

US MOTOR WORKS supplies the 3 Cooling Fan Control Module parts for the 2008 Chrysler Sebring. All of them fit every engine offered in the 2008 Sebring.

This group includes US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts for the 2008 Chrysler Sebring come from 3 brands — ACDELCO, GATES and MOTORAD. Every part fits all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6).

Part numbers include ACDELCO 12A01, GATES 31413 and MOTORAD 3003.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts for the 2008 Chrysler Sebring come from 10 brands — FAMOUS BRAND, GPD, CSF and 7 other brands. The "Popular" part is CSF 3415. Every part fits all 3 engine options (2.4L L4, 2.7L V6 and 3.5L V6).

The Economy section: 2 options from FAMOUS BRAND and GPD. FAMOUS BRAND 438144 is listed in this group.

Standard Replacement: 8 parts, from CSF, SPECTRA PREMIUM, AGILITY and 5 other brands. A representative part number is CSF 3415.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

7 Radiator Cap parts for the 2008 Chrysler Sebring come from 4 brands — GATES, MOTORAD, SKP and 1 other brand. The "Popular" part is GATES 31528. 5 parts fit every engine; the other 2 are engine-specific.

In the Locking Replacement grade, GATES and MOTORAD supply 2 parts: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is GATES 31518.

Standard Replacement: 5 parts, from SKP, GATES, MOTORAD and 1 other brand. A representative part number is GATES 31528.

This group includes GATES 31528, GATES 31518 and MOTORAD ST16 and the remaining parts above.

This table covers the petcocks used to drain the radiator. Read more

One part is listed for the 2008 Chrysler Sebring — MOPAR 52028466AB.

This table covers the fan assemblies (and clutches, where listed) that pull air through the radiator. Read more

6 Radiator Fan Assembly parts are listed for the 2008 Chrysler Sebring, from DORMAN, GPD, FOUR SEASONS and 3 other brands. DORMAN 621029 carries the "Popular" badge. All of them fit every engine offered in the 2008 Sebring.

Economy: 2 parts, from DORMAN and GPD. A representative part number is DORMAN 621029.

The Standard Replacement section: 4 options from FOUR SEASONS, TYC, UAC and 1 other brand. FOUR SEASONS 76103 is listed in this group.

Part numbers include DORMAN 621029, GPD 2811608 and FOUR SEASONS 76103, among others listed above.

This table covers the Radiator Fan motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: VEMO V33010024.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

25 Radiator Hose parts are listed for the 2008 Chrysler Sebring, from GATES, DAYCO, CONTINENTAL and 1 other brand. ACDELCO 26668X carries the "Popular" badge.

This table covers the harness connectors at the Radiator Hose. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CONTINENTAL 65652.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

24 Temperature Sender / Sensor parts for the 2008 Chrysler Sebring come from 13 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, GPD and 10 other brands. The "Popular" part is SKP SKTX98. 1 part fits every engine; the other 23 are engine-specific.

The Economy section: 12 options from GPD, HOLSTEIN, UNITED MOTOR PRODUCTS and 5 other brands. SKP SKTX98 is listed in this group.

The Full Service Kit section lists 1 option from WALKER PRODUCTS — grouped under the catalog's "Full Service Kit" designation — the notes column spells out what sets them apart. WALKER PRODUCTS 21191074 is listed in this group.

Standard Replacement: 11 parts, from DELPHI, NTK, STANDARD MOTOR PRODUCTS and 3 other brands. A representative part number is DELPHI TS10546.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

36 Thermostat parts are listed for the 2008 Chrysler Sebring, from MOTORAD, GATES, CALORSTAT and 7 other brands. CALORSTAT TH731077J carries the "Popular" badge. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by MOTORAD, GATES, CALORSTAT and 3 other brands.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2008 Chrysler Sebring come from 5 brands — FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO 35826.

This table covers the housings and outlets the thermostat sits in. Read more

11 Thermostat Housing / Water Outlet parts are listed for the 2008 Chrysler Sebring, from DORMAN, ULTRA-POWER, SKP and 3 other brands. DORMAN 902316 carries the "Popular" badge.

Economy: 8 parts, from DORMAN, ULTRA-POWER, SKP and 1 other brand. A representative part number is DORMAN 902316.

The Standard Replacement section: 3 options from MOTORAD and FOUR SEASONS. FOUR SEASONS 85342 is listed in this group.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

9 Water Pump parts are listed for the 2008 Chrysler Sebring, from SKP, US MOTOR WORKS, FVP and 6 other brands. SKP SKAW6010 carries the "Popular" badge.

Economy: 4 parts, from SKP, US MOTOR WORKS, FVP and 1 other brand. A representative part number is SKP SKAW6010.

The Standard Replacement section: 5 options from ACDELCO, AISIN, DAYCO and 2 other brands. ACDELCO 252914 is listed in this group.

Listed part numbers: SKP SKAW6010 and US MOTOR WORKS US8951, plus the other parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Water Pump Gasket parts for the 2008 Chrysler Sebring come from 3 brands — FEL-PRO, VICTOR REINZ and APEX. The "Popular" part is FEL-PRO 35813.

Listed part numbers: FEL-PRO 35813, APEX AWP3195 and FEL-PRO 35785, plus the other parts above.

This table covers the Water Pump Seal O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2008 Chrysler Sebring — FEL-PRO 35499.