2008 Chrysler Voyager Steering Parts

Engine:
3.3L V6

This page lists 34 steering parts for the 2008 Chrysler Voyager, across 11 part types, covering the 3.3L V6 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2008 Chrysler Voyager, the steering system connects driver to road through the rack, pump, tie rods, and column components. 15 parts of the 34 listed are Tie Rod End (6 parts), Power Steering Fluid (5 parts) and Power Steering Reservoir (4 parts). The other 8 part types cover the remaining 19 parts.

Power Steering Fluid

Brand Part Number Markets Notes Buy
EDELMANN Popular 70694
🇲🇽 MX
Quart
View on
Amazon
LUBEGARD 23201
🇲🇽 MX
1 QuartSynthetic Power Steering Fluid
View on
Amazon
LUBEGARD 23205
🇲🇽 MX
5 GallonSynthetic Power Steering Fluid
View on
Amazon
LUBEGARD 23232
🇲🇽 MX
Synthetic Power Steering Fluid1 Quart
View on
Amazon
LUBEGARD 23255
🇲🇽 MX
55 GallonSynthetic Power Steering Fluid
View on
Amazon

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.

Power Steering Pressure Hose

Brand Part Number Markets Notes Buy
EDELMANN 92565
🇲🇽 MX
Pump To Gear
View on
Amazon
EDELMANN 92565E
🇲🇽 MX
Elite Extreme Weather Hose
Fitment notes — EDELMANN 92565E
Elite Extreme Weather Hose
Pump To Gear
View on
Amazon
SUNSONG 3402926
🇲🇽 MX
View on
Amazon

This table covers the Power Steering Pressure hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle.

Power Steering Pump

Brand Part Number Markets Notes Buy
AAE 63171N
🇲🇽 MX
without ReservoirPulley Not Included
View on
Amazon

This table covers the Power Steering pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Power Steering Pump Seal Kit

Brand Part Number Markets Notes Buy
EDELMANN 8931
🇲🇽 MX
View on
Amazon
FVP 8931
🇲🇽 MX
View on
Amazon
SUNSONG 8401508
🇲🇽 MX
View on
Amazon

This table covers the Power Steering Pump Seal kits.

Power Steering Reservoir

Brand Part Number Markets Notes Buy
AAE RES0126
🇲🇽 MX
View on
Amazon
DORMAN 603934
🇲🇽 MX
View on
Amazon
LARES 20179
🇲🇽 MX
Includes Reservoir Cap
View on
Amazon
SKP SK603934
🇲🇽 MX
View on
Amazon

This table covers the Power Steering reservoirs.

Power Steering Reservoir Cap

Brand Part Number Markets Notes Buy
DORMAN 54301
🇲🇽 MX
Diameter: 22.5 mm
View on
Amazon
SKP SK54301
🇲🇽 MX
Diameter: 22.5 mm
View on
Amazon

This table covers the Power Steering Reservoir caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.

Power Steering Return Hose

Brand Part Number Markets Notes Buy
EDELMANN 92709
🇲🇽 MX
Gear To Cooler
View on
Amazon
EDELMANN 92710
🇲🇽 MX
Cooler Tube
View on
Amazon
SUNSONG 3404196
🇲🇽 MX
Cooler Tube
View on
Amazon

This table covers the Power Steering Return hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle.

Rack and Pinion

New

Brand Part Number Markets Notes Buy
LARES 23907
🇲🇽 MX
Includes Inline Filter
Fitment notes — LARES 23907
Includes Inline Filter
Power Rack
View on
Amazon
MAVAL 95328MN
🇲🇽 MX
Hydraulic
View on
Amazon
SKP SK22373
🇲🇽 MX
View on
Amazon

Remanufactured

Brand Part Number Markets Notes Buy
MAVAL 95328M
🇲🇽 MX
Remanufactured Rack and Pinion Assembly
View on
Amazon

This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak.

Rack and Pinion Hydraulic Transfer Tube

Brand Part Number Markets Notes Buy
CARDONE 3L1116
🇲🇽 MX
with Short Fluid Tube
View on
Amazon

This table covers the Rack and Pinion Hydraulic Transfer tubes.

Rack and Pinion Seal Kit

Brand Part Number Markets Notes Buy
EDELMANN 9200
🇲🇽 MX
View on
Amazon
FVP 9200
🇲🇽 MX
View on
Amazon

This table covers the Rack and Pinion Seal kits.

Tie Rod End

Brand Part Number Markets Notes Buy
DORMAN Popular 543719
🇲🇽 MX
Front Innerwith Mopar Replacement Inner Tie Rods
Fitment notes — DORMAN 543719
Front Innerwith Mopar Replacement Inner Tie Rodswith Step Up Shaft Thickness at Bellow (17 mm/.668 Inch O.D.) Inner Tie Rod End
View on
Amazon
FVP Popular TI81220
🇲🇽 MX
Front Innerwith Mopar Replacement Inner Tie Rods
Fitment notes — FVP TI81220
Front Innerwith Mopar Replacement Inner Tie Rodswith Step Up Shaft Thickness at Bellow (17 mm/.668 Inch O.D.) Inner Tie Rod End
View on
Amazon
DORMAN 541334
🇲🇽 MX
Front Innerwith Original Continuous Shaft Thickness (14 mm/.552 In. O.D.) Inner Tie Rod End
View on
Amazon
DORMAN 544514
🇲🇽 MX
Front Outer
View on
Amazon
FVP IS405
🇲🇽 MX
Front Innerwith Original Continuous Shaft Thickness (14 mm/.552 In. O.D.) Inner Tie Rod End
View on
Amazon
FVP TO82225
🇲🇽 MX
Front Outer
View on
Amazon

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment.

Buying Steering Parts for a 2008 Chrysler Voyager

On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.

  • Confirm you have the 3.3L V6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Tie Rod End and Power Steering Fluid .

Frequently Asked Questions

How many steering parts fit the 2008 Chrysler Voyager?

Our catalog currently lists 34 steering parts for the 2008 Chrysler Voyager across 11 subcategories and 10 brands, covering the 3.3L V6 engine. Each part is matched to the engine(s) it fits.

What are the signs of steering problems on a 2008 Chrysler Voyager?

Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Chrysler Voyager was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2008 Chrysler Voyager?

Every part on this page is matched to the 3.3L V6 engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2008 Chrysler Voyager

Steering Parts for Other Chrysler Voyager Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.