2010 Chrysler 300 Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2010 Chrysler 300.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2010 Chrysler 300, from FOUR SEASONS and GPD.

Part numbers include FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 ABS Wheel Speed Sensor Connector parts for the 2010 Chrysler 300 come from WELLS.

Listed part numbers: WELLS 1P2300 and WELLS 1P2301.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2010 Chrysler 300 come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

This group includes ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and WELLS 1P2224.

This table covers the Adapter plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 68021352AA.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS, WELLS, DORMAN and 2 other brands. STANDARD MOTOR PRODUCTS HP4665 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS HP4665, WELLS 1P1694 and DORMAN 645218 and the remaining parts above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Alternator / Generator Connector parts for the 2010 Chrysler 300 come from 3 brands — WELLS, STANDARD MOTOR PRODUCTS and HOLSTEIN. The "Popular" part is WELLS 1P1344.

Part numbers include WELLS 1P1344, HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS HP4347, among others listed above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ambient Air Temperature Sensor Connector parts for the 2010 Chrysler 300 come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S820.

Part numbers include STANDARD MOTOR PRODUCTS S820, WALKER PRODUCTS 2701055 and WELLS 1P1311, among others listed above.

This table covers the harness connectors at the Auto Shut Down Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Auto Shut Down Relay Connector parts for the 2010 Chrysler 300 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2711.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

14 Blower Motor Control Module / Resistor Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 3 other brands. GPD 1713422 carries the "Popular" badge.

This table covers the body-harness connectors and pigtails. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 6 Body Wiring Harness / Connector parts for the 2010 Chrysler 300.

This group includes MOPAR 4806478AA, MOPAR 5059133AA and MOPAR 5059134AA and the remaining parts above.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Brake Fluid Level Sensor Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57 and the remaining parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

12 Camshaft Position Sensor Connector parts for the 2010 Chrysler 300 come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3925.

This table covers the harness connectors at the Computer Control Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2010 Chrysler 300.

This group includes STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Crankshaft Position Sensor Connector parts for the 2010 Chrysler 300 come from 5 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, ROSTRA and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

Listed part numbers: STANDARD MOTOR PRODUCTS S2316, HOLSTEIN 2HAR0060 and ROSTRA 610139, plus the other parts above.

This table covers the harness connectors at the Cylinder Deactivation Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Cylinder Deactivation Solenoid Connector parts for the 2010 Chrysler 300 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 5 Door Wiring Harness / Connector parts for the 2010 Chrysler 300.

Part numbers include MOPAR 4607112AE, MOPAR 4607884AA and MOPAR 5081333AB, among others listed above.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 EGR Valve Connector parts for the 2010 Chrysler 300 come from 2 brands — UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Engine Block Heater Connector parts for the 2010 Chrysler 300 come from MOPAR.

Listed part numbers: MOPAR 4608805AD and MOPAR 5148099AB.

This table covers the harness connectors at the Engine Compartment Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1580.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

11 Engine Wiring Harness / Connector parts are listed for the 2010 Chrysler 300, from MOPAR, STANDARD MOTOR PRODUCTS, WELLS and 1 other brand. STANDARD MOTOR PRODUCTS S1960 carries the "Popular" badge.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 6S1047.

This table covers the harness connectors at the Fog / Driving Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fog / Driving Lamp Relay Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Fuel Injection Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injection Relay Connector parts for the 2010 Chrysler 300 come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Fuel Injector Connector parts for the 2010 Chrysler 300 come from 7 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, WELLS 1P1344 and ACDELCO PT2160, plus the other parts above.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Pump / Circuit Opening Relay Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Headlamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Headlamp Switch Connector parts for the 2010 Chrysler 300 come from 2 brands — MOPAR and WELLS.

Listed part numbers: MOPAR 5087271AA and WELLS 1P1612.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

STANDARD MOTOR PRODUCTS supplies the 4 Headlamp Wiring Harness / Connector parts for the 2010 Chrysler 300.

This group includes STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106 and the remaining parts above.

This table covers the harness connectors at the Heater Core Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at the Hood Ajar Indicator Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — WELLS 1P3330.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: ULTRA-POWER 2701055.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts for the 2010 Chrysler 300 come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

This group includes ROSTRA 610156, STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60 and the remaining parts above.

This table covers the harness connectors at the Ignition Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Relay Connector parts for the 2010 Chrysler 300 come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Instrument Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — MOPAR 5081514AE.

This table covers the harness connectors at the Instrument Panel Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — WELLS 1P1612.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Knock / Detonation Sensor Connector parts for the 2010 Chrysler 300 come from 3 brands — DORMAN, WALKER PRODUCTS and WELLS.

This group includes DORMAN 85137, WALKER PRODUCTS 2701034 and WELLS 1P1819.

This table covers the harness connectors at the Lighting Control Module (LCM). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1911.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Manifold Pressure (MAP) Sensor Connector parts for the 2010 Chrysler 300 come from 2 brands — ROSTRA and WELLS.

This group includes ROSTRA 610107 and WELLS 1P1795.

This table covers the harness connectors at the Multi-Function Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — WELLS 1P1143.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Oil Pressure Sender / Switch Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 1 other brand. STANDARD MOTOR PRODUCTS HP3925 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS HP3925, WELLS 1P1711 and HOLSTEIN 2HAR0054 and the remaining parts above.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — WELLS 1P2227.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2010 Chrysler 300 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1932 and WELLS 1P4135.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2010 Chrysler 300 — METRA AXACCH4.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking / Turn Signal Lamp Connector parts for the 2010 Chrysler 300 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2086 and WELLS 1P3480.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts for the 2010 Chrysler 300 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1497 and WELLS 1P3362.

This table covers the harness connectors at the Parking Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Brake Switch Connector parts are listed for the 2010 Chrysler 300, from FAMOUS BRAND and WELLS.

Part numbers include FAMOUS BRAND PTA3009 and WELLS 1P2226.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Parking Lamp Relay Connector parts are listed for the 2010 Chrysler 300, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810, STANDARD MOTOR PRODUCTS S654 and WELLS 1P1143.

This table covers the harness connectors at the Power Distribution Block. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2667.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2010 Chrysler 300.

Listed part numbers: STANDARD MOTOR PRODUCTS S2079 and STANDARD MOTOR PRODUCTS S2093.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies both parts for the 2010 Chrysler 300.

Listed part numbers: METRA 716522 and METRA AXADBXHCH2.

This table covers the Repair harnesses. Read more

This group shows a single part: ROSTRA 3500170.

This table covers the harness connectors at the Seat Heater Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Seat Heater Switch Connector parts for the 2010 Chrysler 300 come from 2 brands — ROSTRA and WELLS.

Part numbers include ROSTRA 610977 and WELLS 1P2228.