2012 Chrysler 200 Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: MOPAR 4884870AB.

This table covers the guides that keep the balance-shaft chain on its path. Read more

2 Balance Shaft Chain Guide parts for the 2012 Chrysler 200 come from 2 brands — MOPAR and PREFERRED COMPONENTS INC.

This group includes MOPAR 4884589AA and PREFERRED COMPONENTS INC R76139.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2012 Chrysler 200 — PREFERRED COMPONENTS INC T66222.

This table covers the camshafts that open the valves. Read more

9 Camshaft parts for the 2012 Chrysler 200 come from 4 brands — MELLING, MOPAR, SKP and 1 other brand. The "Popular" part is MELLING MC1420.

Listed part numbers: MELLING MC1420, ENGINETECH ES1420 and MELLING MC1421, plus the other parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: MOPAR 1016A031.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Camshaft Seal parts are listed for the 2012 Chrysler 200, from FEL-PRO, APEX, ELRING and 2 other brands. FEL-PRO TCS45961 carries the "Popular" badge.

This group includes FEL-PRO TCS45961, APEX ATC11030 and ELRING 127610 and the remaining parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Connecting Rod Bearing parts for the 2012 Chrysler 200 come from 6 brands — MAHLE / CLEVITE, ENGINETECH, SEALED POWER and 3 other brands. The "Popular" part is ENGINETECH BB175J.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2012 Chrysler 200 — MOPAR MN195112.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Conversion / Lower Gasket Set parts for the 2012 Chrysler 200 come from 8 brands — ELRING, APEX, ENGINETECH and 5 other brands. The "Popular" part is APEX ACS2086.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2012 Chrysler 200 come from 2 brands — ENGINETECH and MOPAR.

Part numbers include ENGINETECH 191020 and MOPAR 4884563AC.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 2012 Chrysler 200, from ENGINETECH, MAHLE / CLEVITE, MOPAR and 3 other brands. ENGINETECH BC152J carries the "Popular" badge.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts are listed for the 2012 Chrysler 200, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. WJB / INMOTION PARTS WS99166 carries the "Popular" badge.

This group includes WJB / INMOTION PARTS WS99166, BCA NS99166 and BCA NS99177 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

42 Crankshaft Seal parts are listed for the 2012 Chrysler 200, from VICTOR REINZ, ELRING, FEL-PRO and 14 other brands. APEX ABS275 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the cylinder heads that close the top of the block. Read more

3 Cylinder Head parts are listed for the 2012 Chrysler 200, from ENGINETECH and MOPAR.

Part numbers include ENGINETECH CH1132R, ENGINETECH CH1131R and MOPAR R8004168AA.

This table covers the bolts that clamp the cylinder head to the block. Read more

17 Cylinder Head Bolt parts for the 2012 Chrysler 200 come from 11 brands — FEL-PRO, MAHLE / CLEVITE, SKP and 8 other brands. The "Popular" part is FEL-PRO ES72267.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

28 Cylinder Head Gasket parts for the 2012 Chrysler 200 come from 11 brands — AJUSA, VICTOR REINZ, APEX and 8 other brands. The "Popular" part is APEX AHG286. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

30 Cylinder Head Gasket Set parts for the 2012 Chrysler 200 come from 11 brands — FEL-PRO, ELRING, ENGINETECH and 8 other brands. The "Popular" part is APEX AHS2086. A list this long means Cylinder Head Gasket Set applications vary by configuration — the notes carry the qualifiers.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2012 Chrysler 200 — MOPAR 4884892AA.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts for the 2012 Chrysler 200 come from SBI.

Part numbers include SBI 2302200L and SBI 2302200R.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

6 Engine Block Heater parts are listed for the 2012 Chrysler 200, from KAT'S HEATERS and MOPAR.

This group includes KAT'S HEATERS 11812, KAT'S HEATERS 28812 and KAT'S HEATERS 11814 and the remaining parts above.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2012 Chrysler 200 come from 2 brands — MOPAR and TECHPRO. 2 parts fit every engine; the other 1 is engine-specific.

Part numbers include MOPAR 68105431AA, MOPAR 4627272AB and TECHPRO CH1228175.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Engine Kit Gasket Set parts for the 2012 Chrysler 200 come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH CR122K6.

Listed part numbers: ENGINETECH CR122K6, AJUSA 50388500 and AJUSA 50367600, plus the other parts above.

This table covers the brackets that mount the Engine Lift. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 4884752AC.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

12 Exhaust Valve parts are listed for the 2012 Chrysler 200, from MELLING, QUALCAST, ENGINETECH and 4 other brands. MELLING V3191 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

12 Harmonic Balancer parts for the 2012 Chrysler 200 come from 6 brands — ATP, SKP, DORMAN and 3 other brands. The "Popular" part is SKP SK594341. 3 parts fit every engine; the other 9 are engine-specific.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SK594341 is listed in this group.

In the Standard Replacement grade, ATP, DORMAN, PIONEER and 2 other brands supply 10 parts: built to original-equipment specification. A representative part number is ATP 102343.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

8 Intake Manifold parts are listed for the 2012 Chrysler 200, from DORMAN, MOPAR, AUTOTECNICA and 3 other brands. AUTOTECNICA CY1418959 carries the "Popular" badge.

Part numbers include AUTOTECNICA CY1418959, DORMAN 615802 and DORMAN 615914, among others listed above.

This table covers the Intake Manifold bolts. Read more

2 Intake Manifold Bolt parts for the 2012 Chrysler 200 come from 2 brands — DORMAN and MOPAR. 1 part fits every engine; the other 1 is engine-specific.